Ignore:
Timestamp:
08/19/17 18:16:52 (7 years ago)
Author:
obi
Message:

reset wiki to 39680

File:
1 edited

Legend:

Unmodified
Added
Removed

  • wiki/pages/en/Installation-Recovery-Mips-Miraclebox

    r40398 r40777  
     1[[TranslatedPages]]
     2----
     3'''8.090 Miraclebox''' [=#point8.090] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     4----
     5
     6manufacturer blurb......
     7
     8
     9
     10
     11
     12----
     13'''8.091 Miraclebox Ultra''' [=#point8.091] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     14----
     15'' How do I install an Miraclebox Ultra Update UBI image? ''
     16 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
     17 * Extract the zip file
     18 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
     19    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
     20     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     21 * Turn off the Receiver and disconnect all USB devices.
     22 * Connect the USB stick with the IRD file to your Receiver
     23 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
     24   then the installation begins, Only then release the button.
     25    Note: If installation does not start , use a different USB stick.
     26 * After successfully installing the receiver will reboot and the installed image should start-up
     27[[br]]
     28[#point8 Top of Page]
     29[[br]]
     30----
     31'''8.092 Miraclebox Mini''' [=#point8.092] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     32----
     33'' How do I install an Miraclebox Mini Update UBI image? ''
     34 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
     35 * Extract the zip file
     36 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
     37    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
     38     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     39 * Turn off the Receiver and disconnect all USB devices.
     40 * Connect the USB stick with the IRD file to your Receiver
     41 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
     42   then the installation begins, Only then release the button.
     43    Note: If installation does not start , use a different USB stick.
     44 * After successfully installing the receiver will reboot and the installed image should start-up
     45[[br]]
     46[#point8 Top of Page]
     47[[br]]
Note: See TracChangeset for help on using the changeset viewer.