Ignore:
Timestamp:
Aug 19, 2017, 6:16:52 PM (2 years ago)
Author:
obi
Message:

reset wiki to 39680

File:
1 edited

Legend:

Unmodified
Added
Removed
  • wiki/pages/en/Installation-Recovery-SH4-Katherin

    r40398 r40777  
     1[[TranslatedPages]]
     2----
     3'''8.040 Kathrein''' [=#point8.040] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     4----
     5
     6Fortis is a Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized bootloaders to lock them to a specific sales region, TitanNit installation is possible after the installation of a Atevio compatible bootloader.
     7
     8'''SH4 Fortis Contents'''
     9
     10 * [#point8.041 8.041 Kathrein Ufs910]
     11 * [#point8.042 8.042 Kathrein Ufs912]
     12 * [#point8.043 8.043 Kathrein Ufs913]
     13 * [#point8.044 8.044 Kathrein Ufs922]
     14 * [#point8.045 8.045 Kathrein Ufs960]
     15
     16'''Additional Info'''
     17
     18 * [#point8.046 8.06 Uninstallation]
     19 * [#point8.047 8.07 Update TitanNit]
     20 * [#point8.048 8.08 IRD Download Location]
     21
     22----
     23'''8.041 Kathrein Ufs910''' [=#point8.041] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     24----
     25'' How do I install a Kathrein UFS910 update image? ''
     26 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
     27 * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
     28 * Extract the zip file
     29 * Now copy the unzipped img firmware file - must be renamed to miniFLASH.img - to a formatted FAT32 USB stick.
     30     Note: The USB stick should not be formatted with windows, but a separate program, such as the
     31     " HP USB Disk Storage Format Tool" (freeware program).
     32     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     33 * Turn off the Receiver and disconnect all USB devices.
     34 * Connect the USB stick with the img file to the front USB Port
     35 * Switch on (mains switch) and at the same time hold the -Record button- on the Remote Control pressed (about 5 seconds)
     36   until "miniFLASH search..." appears, then the installation begins. Only then release the -Record button-
     37     Note: If installation does not start, use a different USB stick.
     38 * After successfully installing the receiver will reboot and the installed image should start-up
     39[[br]]
     40[#point8 Top of Page]
     41[[br]]
     42----
     43'''8.042 Kathrein UFS912''' [=#point8.042] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     44----
     45'' How do I install a Kathrein UFS912 update image? ''
     46 * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
     47 * Extract the zip file
     48 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs912/ .
     49     Note: The USB stick should not be formatted with windows, but a separate program, such as the
     50     " HP USB Disk Storage Format Tool" (freeware program).
     51     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     52 * Turn off the Receiver and disconnect all USB devices.
     53 * Connect the USB stick with the img file
     54 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
     55   then the installation begins. Only after that message release the -TV/Radio button-
     56     Note: If installation does not start, use a different USB stick.
     57 * After successfully installing the receiver will reboot and the installed image should start-up
     58[[br]]
     59[#point8.1 Top of Page]
     60[[br]]
     61----
     62'''8.043 Kathrein UFS913''' [=#point8.043] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     63----
     64'' How do I install a Kathrein UFS913 update image? ''
     65 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
     66 * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
     67 * Extract the zip file
     68 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ .
     69     Note: The USB stick should not be formatted with windows, but a separate program, such as the
     70     " HP USB Disk Storage Format Tool" (freeware program).
     71     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     72 * Turn off the Receiver and disconnect all USB devices.
     73 * Connect the USB stick with the img file
     74 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
     75   then the installation begins. Only after that message release the -TV/Radio button-
     76     Note: If installation does not start, use a different USB stick.
     77 * After successfully installing the receiver will reboot and the installed image should start-up
     78[[br]]
     79[#point8.1 Top of Page]
     80[[br]]
     81----
     82'''8.044 Kathrein UFS922''' [=#point8.044] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     83----
     84'' How do I install a Kathrein UFS922 update image? ''
     85 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
     86 * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
     87 * Extract the zip file
     88 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ .
     89     Note: The USB stick should not be formatted with windows, but a separate program, such as the
     90     " HP USB Disk Storage Format Tool" (freeware program).
     91     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     92 * Turn off the Receiver and disconnect all USB devices.
     93 * Connect the USB stick with the img file
     94 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
     95   then the installation begins. Only after that message release the -TV/Radio button-
     96     Note: If installation does not start, use a different USB stick.
     97 * After successfully installing the receiver will reboot and the installed image should start-up
     98[[br]]
     99[#point8 Top of Page]
     100[[br]]
     101----
     102'''8.045 Kathrein UFC960''' [=#point8.045] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     103----
     104'' How do I install a Kathrein UFS960 update image? ''
     105 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
     106 * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
     107 * Extract the zip file
     108 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs960/ .
     109     Note: The USB stick should not be formatted with windows, but a separate program, such as the
     110     " HP USB Disk Storage Format Tool" (freeware program).
     111     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     112 * Turn off the Receiver and disconnect all USB devices.
     113 * Connect the USB stick with the img file
     114 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
     115   then the installation begins. Only after that message release the -TV/Radio button-
     116     Note: If installation does not start, use a different USB stick.
     117 * After successfully installing the receiver will reboot and the installed image should start-up
     118[[br]]
     119[#point8 Top of Page]
     120[[br]]
     121
     122----
     123'''8.046 Uninstalling Titan''' [=#point8.046] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     124----
     125If you have an Katherin UFS receiver all you have to do is install your original IMG file as explained above and no bootloader changes are neccessary.
     126
     127[[br]]
     128[#point8 Top of Page]
     129[[br]]
     130
     131----   
     132'''8.047 Update TitanNit''' [=#point8.047] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
     133----
     134There are two ways to update your TitanNit version and there are merits to both methods :
     135
     136IRD offline method see [#point8 Ipbox contents] and select your Reciever model to show information on how to update titan using an IRD titannit image.
     137[[br]]
     138''Note: using this method plugins and files stored to Flash will be formatted when the update is proformed.
     139Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .''
     140
     141Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.
     142[[br]]
     143''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
     144[[br]]
     145[#point8 Top of Page]
     146[[br]]
     147
     148----   
     149'''8.048 IRD Download Locations''' [=#point8.048] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
     150----
     151[http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]] 
     152 
     153[[br]] 
     154[#point8 Top of Page] 
     155[[br]]
Note: See TracChangeset for help on using the changeset viewer.