Ignore:
Timestamp:
Aug 19, 2017, 6:16:52 PM (2 years ago)
Author:
obi
Message:

reset wiki to 39680

File:
1 edited

Legend:

Unmodified
Added
Removed
  • wiki/pages/en/Installation-Recovery-SH4-Spark

    r40398 r40777  
     1[[TranslatedPages]]
     2----
     3'''8.051 SPARK''' [=#point8.050] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     4----
     5
     6Spark is a reseller of the Fulan Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized hardware.
     7
     8'''SH4 Spark Contents'''
     9
     10 * [#point8.051 8.051 SPARK (7111)]
     11 * [#point8.052 8.052 SPARK (7162)]
     12
     13'''Additional Info'''
     14
     15
     16 * [#point8.053 8.053 Uninstallation]
     17 * [#point8.054 8.054 Update TitanNit]
     18 * [#point8.055 8.055 IRD Download Location]
     19
     20
     21
     22----
     23'''8.051 SPARK (7111)''' [=#point8.051] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     24----
     25'' How do I install a Spark (7111) Update Image? ''
     26  * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
     27  * Extract the zip file
     28  * Copy the unzipped firmware update file to a formatted to FAT32 USB stick and copy the file e2jffs2.img and uImage into a folder called "enigma2"
     29     Note: The USB stick should not be formatted with windows, but a separate program, such as the
     30     " HP USB Disk Storage Format Tool" (freeware program).
     31     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     32  * Turn off the device.
     33  * Connect the USB stick with the update file
     34  * hold the "OK" button and switch on the(mains plug) and hold it down (about 5 seconds) until "Forc" appears,
     35    then the installation will begin, when you see "U LD" in the display release the "OK" button.
     36      Note: If the installation does not start, use a different USB stick.
     37  * After installation "SUCC" appears in the display boot the receiver and the new image should appear.
     38[[br]]
     39[#point8.050 Top of Page]
     40[[br]]
     41----
     42'''8.052 SPARK7162''' [=#point8.052] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     43----
     44'' How do I install a Spark (7162) Update Image? ''
     45  * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
     46  * Extract the zip file
     47  * Copy the unzipped firmware update file to a formatted to FAT32 USB stick and copy the file e2jffs2.img and uImage into a folder called "enigma2"
     48     Note: The USB stick should not be formatted with windows, but a separate program, such as the
     49     " HP USB Disk Storage Format Tool" (freeware program).
     50     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     51  * Turn off the device.
     52  * Connect the USB stick with the update file
     53  * hold the "OK" button and switch on the(mains plug) and hold it down (about 5 seconds) until "Forc" appears,
     54    then the installation will begin, when you see "U LD" in the display release the "OK" button.
     55      Note: If the installation does not start, use a different USB stick.
     56  * After installation "SUCC" appears in the display boot the receiver and the new image should appear.
     57[[br]]
     58[#point8.050 Top of Page]
     59[[br]]
     60
     61----
     62'''8.053 Uninstalling Titan''' [=#point8.053] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     63----
     64If you have an Atemio/Atevio or UFS receiver all you have to do is install your original ird file as explained above and no bootloader changes are neccessary.
     65
     66[[br]]
     67[#point8.050 Top of Page]
     68[[br]]
     69
     70----   
     71'''8.054 Update TitanNit''' [=#point8.054] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
     72----
     73There are two ways to update your TitanNit version and there are merits to both methods :
     74
     75IRD offline method see [#point8 Installation / Recovery] and select your Receiver model to show information on how to update titan using an IRD TitanNit image.
     76[[br]]
     77''Note: using this method plugins and files stored to Flash will be formatted when the update is preformed.
     78Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .''
     79
     80Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.
     81[[br]]
     82''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
     83[[br]]
     84[#point8.050 Top of Page]
     85[[br]]
     86
     87----   
     88'''8.055 IRD Download Locations''' [=#point8.055] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
     89----
     90[http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]] 
     91 
     92[[br]] 
     93[#point8.050 Top of Page] 
     94[[br]]
Note: See TracChangeset for help on using the changeset viewer.