Ignore:
Timestamp:
09/02/17 06:03:08 (7 years ago)
Author:
aafsvn
Message:

[titan] autoupdate wiki files

File:
1 edited

Legend:

Unmodified
Added
Removed

  • wiki/pages/nl/Installation-Recovery-Mips-Sezam

    r40542 r40892  
    1 [[TranslatedPages]]
    2 ----
    3 '''8.100 Sezam-Marvel''' [=#point8.100] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Sprachauswahl])
    4 ----
    5 
    6 manufacturer blurb....
    7 
    8 
    9 
    10 
    11 
    12 ----
    13 '''8.101 Sezam-Marvel''' [=#point8.101] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Sprachauswahl])
    14 ----
    15 ''How do I install a Sezam-Marvel  update image? ''
    16  * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
    17  * Extract the zip file
    18  * Now copy the unzipped firmware folder "enigma2" to a formatted FAT32 USB stick.
    19     Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
    20  * Turn off the Receiver and disconnect all USB devices.
    21  * Connect the USB stick with the update image file
    22  * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
    23 
    24 Note: If installation does not start, use a different USB stick.
    25 •After successfully installing the receiver will reboot and the installed image should start-up
    26 [[br]]
    27 [#point8 Top of Page]
    28 [[br]]
    29 ----
    30 '''8.102 Sezam-1000HD''' [=#point8.102] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Sprachauswahl])
    31 ----
    32 ''How do I install a Sezam-1000HD  update image? ''
    33  * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
    34  * Extract the zip file
    35  * Now copy the unzipped firmware folder "enigma2" to a formatted FAT32 USB stick.
    36     Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
    37  * Turn off the Receiver and disconnect all USB devices.
    38  * Connect the USB stick with the update image file
    39  * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
    40 
    41 Note: If installation does not start, use a different USB stick.
    42 •After successfully installing the receiver will reboot and the installed image should start-up
    43 [[br]]
    44 [#point8 Top of Page]
    45 [[br]]
Note: See TracChangeset for help on using the changeset viewer.