Changeset 43267
- Timestamp:
- 01/22/19 02:39:08 (4 years ago)
- Location:
- wiki/pages
- Files:
-
- 345 edited
Legend:
- Unmodified
- Added
- Removed
-
wiki/pages/CamelCase
r40558 r43267 1 = !CamelCase2 New wiki links are automatically created when concatenating capitalized words, such that for example the word 'Camel' and the word 'Case' concatenated form a link to this CamelCase page.3 4 !CamelCase is the original wiki convention for creating hyperlinks, with the additional requirement that the capitals are followed by a lower-case letter; hence “AlabamA” and “ABc” will not be links.5 6 == Customizing the Wiki behavior7 8 While Trac remains faithful to the original Wiki style, it provides a number of ways to accommodate users with different preferences:9 * To prevent the creation of a new link of a camel-cased word, prefix with '!': `!CamelCase`.10 * To ignore links to missing pages when the link is written using the CamelCase style, that word can instead be replaced by a gray link followed by a question mark. This is useful in cases when CamelCase style is used to name code artifacts like class names and there's no corresponding page for them. This option can be set in `ignore_missing_pages` in the [wiki:TracIni#wiki-section "[wiki]"] section of TracIni.11 * There's an option (`split_page_names` in the [wiki:TracIni#wiki-section "[wiki]"] section of TracIni) to automatically insert space characters between the words of a CamelCase link when rendering the link.12 * Creation of explicit Wiki links is also easy, see WikiPageNames for details.13 * Wiki formatting can be disabled completely in some places, for example when rendering commit log messages. See `wiki_format_messages` in the [wiki:TracIni#changeset-section "[changeset]"] section of TracIni.14 15 See TracIni for more information on the available options.16 17 == More information on !CamelCase18 19 * http://c2.com/cgi/wiki?WikiCase20 * http://en.wikipedia.org/wiki/CamelCase21 22 ----23 See also: WikiPageNames, WikiNewPage, WikiFormatting, TracWiki -
wiki/pages/de/About
r37411 r43267 1 [[TranslatedPages]]2 >----3 >'''Über''' [=#point3.70.3] ([#point3.70 Information (zurück])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/DE/about.jpg)]][[BR]]7 >8 > hier werden Informationen zur aktuell installierten Titan Version angezeigt.9 10 [[br]]11 12 13 14 -
wiki/pages/de/Adaptor-Settings
r37411 r43267 1 [[TranslatedPages]]2 >----3 >'''3.5.4.1 Netzwerk Einstellungen''' [=#point3.5.4.1] ([#point3.5.1 Netzwerk (zurück])4 >5 >6 >[[Image(http://i.imgur.com/3TwQr.jpg, 400)]][[br]]7 >8 Hier werden die Netzwerk Einstellungen fixiert.9 10 [[br]]11 12 '''Funktionen der Farbtasten"13 14 Die __"farbigen Tasten"__ die am unteren Menürand angezeigt werden öffnen zusätzliche Menüs oder Optionen.15 16 ||'''rote Taste: (Bearbeiten)''' ||öffnet das Netzwerk - Bearbeitungs Menü||17 ||'''grüne Taste: (Hostname)''' ||öffnet das Hostname Menü um den Namen des Receivers im Netzwerk zu bearbeiten.|| -
wiki/pages/de/Adjust
r37411 r43267 1 [[TranslatedPages]]2 >----3 >'''3.6.6 Einstellungen''' [=#point3.6.6] ([#point3.6 Einstellungen(zurück])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/DE/Adjust.jpg)]][[BR]]7 >8 >hier werden diverse Einstellungen des Receivers fixiert.9 10 [[br]]11 12 ||'''Zeit bis Lautstärkeanzeige ausgeblendet wird (Sek)''' ||bestimmt die Anzeigedauer des Lautstärke Balkens||13 ||'''Infoleiste bei Sendungswechsel anzeigen?''' ||bestimmt ob die Info Leiste beim Wechsel der Sender automatisch angezeigt wird.||14 ||'''Zeit bis Infobar erscheint (Sek)''' ||bestimmt die Zeitverzögerung bis der Info Anzeigebalken erscheint||15 ||'''Zeit bis Infobar ausblendet (Sek)''' ||bestimmt die Anzeigedauer des Info Anzeigebalkens||16 ||'''Second Infobar:''' ||bestimmt die Funktion die durch zweimaliges Drücken der Info Taste aufgerufen wird||17 ||'''Virtuelles Umschalten:''' ||???||18 ||'''Spinnergeschwindigkeit:''' ||Bewegungsgeschwindigkeit des Spinner Symbols||19 ||'''Spinnerzeit:''' ||Zeit ab wann der Spinner angezeigt wird wenn das System im Hintergrund arbeitet||20 ||'''Zeit bis Warnmeldung erscheint (Sek)''' ||Zeitraum ab wann eine Systemmeldung erscheint wenn das System hängt||21 || '''Schnelles Umschalten''' ||Aktivieren des schnellen Umschaltens||22 ||'''TV Bild beim schnellen Umschalten nicht löschen'''|| ||23 ||'''Schneller TitanNit Neustart''' ||???. ||24 ||'''Ordnersortierung''' ||Art der Ordnersortierung im Dateimanager bestimmen||25 ||'''Aktion bei Betätigung der EIN/AUS Taste''' ||bestimmt die Standardfunktion bei Betätigung der POWER Taste||26 ||'''Schnelle Textausgabe''' ||Use the hack Fasttext renderer to increace the speed of text displays. ||27 ||'''Teile Aufnahmen ab einer Größe von''' ||bestimmt ob und ab welcher Dateigröße eine Aufnahmedatei aufgeteilt wird||28 ||'''Vorlaufzeit (Min)''' ||bestimmt den Zeitraum um den eine Aufnahme zu früh gestartet wird. ||29 ||'''Nachlaufzeit (Min)''' ||bestimmt den Zeitraum den die Aufnahme nach dem programmierten Ende noch weiterläuft||30 ||'''Nach der Aufnahme''' ||bestimmt was der Receiver nach der Beendigung der Aufnahme ausführt||31 ||'''Sprungzeit der Tasten 1+3 (Sek)''' ||bestimmt die Zeit wie weit durch Druck der Tasten 1 und 3 während einer Wiedergabe gesprungen wird.||32 ||'''Sprungzeit der Tasten 4+6 (Sek)''' ||bestimmt die Zeit wie weit durch Druck der Tasten 4 und 6 während einer Wiedergabe gesprungen wird.||33 ||'''Sprungzeit der Tasten 7+9 (Sek)''' ||bestimmt die Zeit wie weit durch Druck der Tasten 7 und 9 während einer Wiedergabe gesprungen wird.||34 ||'''Sendername automatisch aktualisieren''' ||Die Senderliste wird bei geänderten Sendernamen oder ersetzten neuen Sendern automatisch korrigiert|35 ||'''Zeige Fortschrittsbalken in Senderliste''' ||Der Sendungs Fortschrittsbalken wird in der Senderliste angezeigt||36 ||'''Animierte Menüs''' ||verwende animierte Menüs||37 ||'''Animationsgeschwindigkeit''' ||bestimmt die Geschwindigkeit der animierten Menüs||38 ||'''Nichtempfangbare Kanäle''' ||Ausblendung von nicht empfangbaren Sendern in der Senderliste||39 ||'''Benutze 'An letzter Stelle beginnen'?''' ||Bei mehrmaligem Start einer Mediendatei kommt eine Abfrage ob am Punkt der letzten Wiedergabe fortgesetzt werden soll.||40 ||'''Synchronisiere Aufnahmen sofort (Schreibcache aus)''' ||During recording ignore data buffer and sync recording imediatly.||41 ||'''Aufnahme Titel''' ||verändert die Standard Dateinamen der Aufnahmen||42 ||'''Newsletter:''' ||aktiviert / deaktiviert den Newsletter beim Systemstart||43 ||'''Versteckte Dateien anzeigen?''' ||Anzeige von versteckten Dateien und Ordnern im Dateiexplorer||44 ||'''Expert Modus:''' ||aktiviert den Expert Modus um erweiterte Funktionen freizuschalten||45 ||'''Benutze das Steuerkreuz für schnelles Umschalten und laut/leis''' ||Die Tasten des Steuerkreuzes können zusätzlich zum Zappen und zur Lautstärken Regulierung verwendet werden.||46 ||'''Deaktiviere Crypt Support während der Wiedergabe von Daten/Streams''' ||Deaktiviert die Entschlüsselung durch CAM und Smartcard während ein Internet Stream oder eine Mediendatei abgespielt wird.||47 ||'''Deaktiviere Mini TV:''' ||Deaktiviert das Mini Vorschaubild innerhalb der Menüs.||48 ||'''Wiedergabepuffer - Zeit bis zum automatischen Laden nach einer Suche''' ||Zeitraum nach einer Sprungzeit um den Wiedergabepuffer erneut zu füllen||49 ||'''Community User:''' ||Set the default username for username propmts. ||50 ||'''Community Pass:''' ||Set the default Password for password propmts. ||51 52 Um diese Einstellungen zu speichern drücken sie "OK", oder "EXIT" um die Änderungen zu Verwerfen und das Menü zu verlassen.53 54 [[br]]55 ----56 57 -
wiki/pages/de/Architecture-Programming
r37356 r43267 1 [[TranslatedPages]]2 3 ----4 '''5 Architektur und Programmierung Inhaltsverzeichnis''' [=#point5] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])5 ----6 [[br]]7 8 TitanNit is currently coded by a group of talented developers from the AAF digital Forums and is released for several different Receiver models and brands/reseller models.9 10 This section explains the architecture and programming imformation that titannit is engineered on and information of the dev team and its helpers in the present and in the past.11 12 Please select an item below for more information.13 14 15 {{{#!div style="width: 1100px; margin: auto"16 {{{#!table style="border: none"17 {{{#!td align=center valign=top style="border: none; font-size: 115%"18 {{{#!div style="float: left"19 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Architecture-Programming/Architectures.png,align=left,link=[#point5.1])]]20 }}}21 '''([#point5.1 Architectures])'''[[br]]22 {{{#!div style="float: left23 Information on the various supported archetures supported by TitanNit24 }}}25 }}}26 {{{#!td align=center valign=top style="border: none; font-size: 115%"27 {{{#!div style="float: left"28 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Architecture-Programming/Programming_Language.png,align=left,link=[#point5.2])]]29 }}}30 '''([#point5.2 Programming language])'''[[br]]31 {{{#!div style="float: left32 Information on the underlying programming of TitanNit.33 }}}34 }}}35 {{{#!td align=center valign=top style="border: none; font-size: 115%"36 {{{#!div style="float: left"37 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Architecture-Programming/Source_Control.png,align=left,link=[#point5.3])]]38 }}}39 '''([#point5.3 Source control])'''[[br]]40 {{{#!div style="float: left41 Information on the source code and policies Of TitanNit.42 }}}43 }}}44 |----45 {{{#!td align=center valign=top style="border: none; font-size: 115%"46 {{{#!div style="float: left"47 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Architecture-Programming/The_Dev_Team.png,align=left,link=[#point5.4])]]48 }}}49 '''([#point5.4 The Dev Team])'''[[br]]50 {{{#!div style="float: left51 Here you will find the[[BR]] members of the dev team.52 }}}53 }}}54 }}}55 }}}56 57 58 ----59 '''5.1 Architecture''' [=#point5.1] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])60 ----61 [[br]]62 63 64 Currently the only supported architecture is the Super-H (sh4), The chipset is a biendian 32bit RISC chipset originally developed for multimedia devices, gaming consoles and set top boxes and was used in the Sega's Dreamcast.65 it has proved popular because of its low cost and high performance and has found use in many low power embedded devices because of it low power consumption.66 67 Titannit is linux based and is based on ST micro electronics opensource linux project made for the Super-H chipset called ([http://stlinux.com/ STLinux]).68 69 The sh4 chipset has been popular with the satellite community because of the quality of the display output and the open source nature of the linux system that runs on it, since its introduction has had many third party firmwares developed for it from different development teams.70 71 TitanNit is Team AAF's sucessor to the AAF enigma 2 based firmware, aaf enigma is currently not developed and support has ended. To further develop TitanNit we recommend that if current AAF Enigma users update to TitanNit for future support.72 73 Note: There is a possibility that development may spread to other Receiver models and other architectures such as the Broadcom MIPS architecture. Future development to support more Receivers is at the mercy of the developers and also the Hardware manufacturers.74 75 [[br]]76 77 ----78 '''5.2 Programming Language''' [=#point5.2] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])79 ----80 [[br]]81 82 83 For performance reasons we have opted to use C programming language [http://en.wikipedia.org/wiki/C_(programming_language) wiki]84 85 In other DBox derived products such as the dream box and VU+ they have opted for a python layer to operate on top of the operating system.86 python is a higher level scripting language used to define and setup elements in the gui and for an intrim language between the OS that is easlly programmable.87 This was done so that so that users can easilly develop and minipulate the system and intergrate plugins skins etc... into the system but this has a proformance hit on these system and can cause them to become slow and laggy and bloated but has the benifit of being easy for the community to develop for with out knowing much about the underlying system.88 89 TitanNit adresses these key conserns and has developed as much as possible br programming in C to increase the proformance of the system but still alowing ease of intergration of plugins and skins using basic scripts.90 91 [[br]]92 93 ----94 '''5.3 Source Control''' [=#point5.3] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])95 ----96 [[br]]97 98 TitanNit is a semi closed source project based on the SH4 open duckbox project and contains open source elements released as required by the licences of those projects.99 100 * The basic Linux Image used in the project is the open source Project [https://gitorious.org/open-duckbox-project-sh4 open-duckbox-project-sh4]101 * TitanNit Source is nonpublic and is only partially freed[source:/titan TitanNit Public Source]102 * The MediaCenter is from [http://ffmpeg.org ffmpeg] and the libeplayer3 is from [https://gitorious.org/open-duckbox-project sh4/tdt/source/tdt/cvs/apps/misc/tools/libeplayer3 libeplayer3]103 * Busybox is a set of unix style tools combined into a single executable [http://www.busybox.net/]104 *105 106 [[br]]107 108 ----109 '''5.4 The Dev team''' [=#point5.4] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])110 ----111 [[br]]112 113 The TitanNit project is proudly produced by the AAF Dev team and other loyal members and helpers.114 development is importand aswell as the work they do to help out with such things as skin's, channel logo's and setups, translations, supplemental programs and tools, and plugins and this is a place for them to be recgonised.115 116 ''Note: currently this section is blank as i will leave it up to the developers and other loyal team members to place their mark''117 118 119 '''Founding DEV Team Members'''120 121 *122 *123 *124 *125 126 '''Dev Team Members'''127 128 *129 130 *131 132 *133 134 '''Loyal Helpers'''135 136 *137 138 *139 140 *141 142 *143 144 '''Team Thanks'''145 146 We would like to thank Atemio / Atevio, who helped fund the TitanNit project and showed interest in this project from its beginnings until now.147 148 *149 150 *151 152 *153 154 155 [[br]] -
wiki/pages/de/Atemio-Hotline
r37411 r43267 1 [[TranslatedPages]]2 >----3 >'''3.7.5 Atemio (hotline)''' [=#point3.7.5] ([#point3.7 Information (Back])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/DE/Atemio_Hotline.jpg)]][[BR]]8 >9 > here you can view contact info from atemio.10 11 [[br]]12 -
wiki/pages/de/Audio-Player
r37411 r43267 1 [[TranslatedPages]]2 >----3 >'''3.2.1 Audio Player''' [=#point3.2.1] ([wiki:Interface-Operation#point3.2 Media Center (zurück]) ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/DE/Audio_Player.jpg)]][[BR]]7 >8 Hier können Sie Ihre Audio Dateien (mp3 usw.) abspielen .[[BR]]9 Wenn Sie die '''OK-Taste''' drücken gelangen Sie in die Filestruktur. [[BR]]10 Hier können Sie festlegen auf welchen Ordner der AudioPlayer zugreifen soll.[[BR]]11 Bsp:12 Audio-Dateien von der interen Festplatte abspielen: /media/hdd/[[BR]]13 Audio-Dateien von einem externen Sepeichermedium abspielen: /media/usb[[BR]]14 Internet-Radio abspielen: /media/internet/radio[[BR]]15 [[br]]16 17 ----18 '''Farbtasten Funktionen'''19 20 ||'''rote Taste: (Sortiere)''' ||bestimmt die Sortiermethode im Dateimanager||21 ||'''grüne Taste: (Dateilisten Modus)''' ||Schaltet zwischen Dateilisten Modus und Playlisten Modus.||22 ||'''gelbe Taste: (Zufällig)''' ||aktiviert den Zufalls Abspielmodus||23 ||'''blaue Taste: (Wiederholen)''' ||aktiviert den Wiederholungs Abspielmodus||24 ||'''Menü Taste: (Menü)''' ||Zeigt ein Zusatzmenü des Audio Players. siehe unten.||25 26 ----27 '''Audio Player Untermenü'''28 29 [[br]]30 31 Audio:32 ||'''Sort:''' ||bestimmt die Sortiermethode im Dateimanager.||33 ||'''Anzeige:''' ||Schaltet zwischen Dateilisten Modus und Playlisten Modus.||34 ||'''MediaDB Autoscan:''' ||Auto scan MediaDb im Hintergrund.||35 ||'''Autostart Playlist:''' ||wählt die Autostart Playliste||36 ||'''Standard Verzeichnis:''' ||bestimmt das Verzeichnis das beim Audio Player Start gezeigt wird.||37 ||'''benutze letztes Verzeichnis:''' ||zeigt das zuletzt besuchte Verzeichnis beim Audio Player Start.||38 39 40 '''Farbtasten Funktionen'''41 42 43 ||'''rote Taste: (Netzwerk)''' ||öffnet das Netzwerk Menü.||44 ||'''grüne Taste: (Bearbeiten)''' ||Bearbeitungs Modus.||45 ||'''gelbe Taste: (Screensaver)''' ||öffnet das Screensaver Menü.||46 47 ----48 -
wiki/pages/de/Autostart-Network
r37411 r43267 1 [[TranslatedPages]]2 ----3 === Autostart Settings ===4 '''3.6.18.4 Netzwerk''' [=#point3.6.18.4] ([#point3.6.18 zurück)])5 ----6 7 8 [[Image(source:/wiki/Wiki-Pictures/DE/Autostart_Settings-network.jpg)]][[br]]9 10 hier werden die Netzwerk Autostart Einstellungen fixiert.11 12 [[br]]13 14 ||'''NFS Server:''' ||aktiviert den NFS Server beim Systemstart. ||15 ||'''Samba Server:''' ||aktiviert den Samba server beim Systemstart. ||16 ||'''Suche WLAN:''' ||aktiviert den Netzwerk Suchlauf beim Systemstart. ||17 18 Um die gemachten Einstellungen zu speichern und das Menü zu verlassen drücken Sie __"OK"__ oder __"Exit"__ um die Änderungen zu verwerfen.19 20 [[br]] -
wiki/pages/de/Backup
r37411 r43267 1 [[TranslatedPages]]2 >----3 >'''3.5.8 Sicherung erstellen''' [=#point3.5.8] ([wiki:Interface-Operation#point3.5 zurück)])4 >5 >6 >7 >[[Image(source:/wiki/Wiki-Pictures/DE/system_backup.jpg)]][[br]]8 >9 Here you can run a manual backup to /tmp or /var/backup if there is insufficent free space you can use a usb device.10 11 please ensure these folders are installed on the device for the Backup to operate.12 13 [[br]]14 15 To Exit from the backup menu press __"Exit"__.16 17 [[br]]18 ----19 20 '''Coloured Button's Functions"21 22 The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the epg settings menu.23 please see below for more info on the functions of these buttons:.24 25 ||'''Red Button: (backup)''' ||This will Start the backup process please follow the onscreen propmps.||26 27 [[BR]] -
wiki/pages/de/Blind-Scan-Settings
r37411 r43267 1 [[TranslatedPages]]2 >----3 >'''3.5.1.6 Blind Scan Settings''' [=#point3.5.1.6] ([wiki:Channel-Service#point3.5.1 Channel-Service (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(http://i.imgur.com/3TwQr.jpg, 400)]][[br]]8 >9 Here you can proform a blind scan.10 11 [[br]]12 13 ||'''Tuner type''' ||Select the recption tuner type.||14 ||'''Minimal Frequency:''' ||Set the mimimum frequency to scan for during blind scan.||15 ||'''Maximum Frequency:''' ||Set the maximum frequency to scan for during blind scan.||16 ||'''Step Frequency:''' ||Set the step size of the frequency in mhz from the start frequency to scan.||17 ||'''Minimal Signalrate:''' ||Set the minimum Signal rate to scan for during blind scan.||18 ||'''Maximum Signalrate''' ||Set the Maximum Signal rate to scan for during blind scan.||19 ||'''Step Signalrate''' ||Set the brightness of the led when the system is in standby.||20 ||'''Use only standard forward error correction (FEC)''' ||???.||21 ||'''DVB-S Services Only:''' ||Scan only for SD channels.||22 ||'''Only Default FEC:''' ||???.||23 24 ''Note: not all these options are relavant or shown and it depend's on the selected tuner type''25 26 To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.27 -
wiki/pages/de/Blue-Button
r37411 r43267 1 [[TranslatedPages]]2 >----3 >'''3.6.5 Blue Button''' [=#point3.6.5] ([#point3.6 Settings (Back])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/DE/Blue_Button.jpg)]][[BR]]8 >9 >here you can configure what happens with the press of the blue button10 11 12 [[br]] -
wiki/pages/de/CPU
r37662 r43267 1 [[TranslatedPages]]2 >----3 >'''3.7.8.6.1 CPU''' [=#point3.7.8.6.1] ([wiki:System-Infos#point3.7.8.6 System Infos (Back])4 >5 >Menu Picture place holder:6 >7 >[[Image(http://i.imgur.com/3TwQr.jpg, 400)]][[br]]8 >9 Here you can view the detailed cpu info.10 11 [[br]]12 13 14 [[br]] -
wiki/pages/de/Change-Feed
r37411 r43267 1 [[TranslatedPages]]2 >----3 >'''3.4.2 Change Feed''' [=#point3.4.2] ([#point3.4 Extentions (Back])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/DE/Change_Feed.jpg)]][[BR]]8 >9 >here you can sett up an aditional feed to obtain extra plugins not found in the online library10 11 [[br]] -
wiki/pages/de/Channel-Edit
r37411 r43267 1 [[TranslatedPages]]2 >----3 >'''3.6.15 Channel Edit''' [=#point3.6.15] ([wiki:Interface-Operation-en#point3.6 Settings (Back)])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/DE/Channel_Edit.jpg)]][[BR]]8 >9 >here you can edit your channel data10 11 12 [[br]]13 14 ||'''Copy Service:''' ||Enable channel copy mode, this enables the user to copy channels to another boquet.||15 ||'''Remove Service:''' ||Enable channel remove mode, this enables the user to remove channels from the currently selected boquet.||16 ||'''Move Service:''' ||Enable channel move mode, this enables the user to move channels to another boquet.||17 ||'''Protect Service:''' ||Enable channel protect mode, this enables the user to pin protect seletcted channels in the currently selected boquet.||18 ||'''Rename Service:''' ||Enable channel rename mode, this enables the user to copy channels to another boquet.||19 ||'''Sort Service:''' || selecting this will sort all channels in all boquets by alphebitac order.||20 ||'''Set Start Channel:''' ||Here you can set the channel you wish for the receiver to show on startup.||21 ||'''Delete Start Channel:''' ||Here you can remove the currently selected startup channel that shows on startup.||22 23 To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes. -
wiki/pages/de/Channel-Service
r37662 r43267 1 [[TranslatedPages]]2 >----3 >'''3.5.1 Channel Service''' [=#point3.5.1] ([wiki:Interface-Operation#point3.5 zurück)])4 >5 >[[Image(source:/wiki/Wiki-Pictures/DE/system-Channel_Service.jpg)]][[BR]]6 >7 Hier werden die Tuner eingestellt und ein Programmsuchlauf durchgeführt8 [[br]]9 10 * ([wiki:Tuner-Configuration#point3.5.1.1 Tuner Konfiguration])11 * ([wiki:Automatic-Search#point3.5.1.2 Automatische Suche])12 * ([wiki:Manual-Search#point3.5.1.3 Manuelle Suche])13 * ([wiki:Rotor-Settings#point3.5.1.4 Rotor])14 * ([wiki:Sat-Finder#point3.5.1.5 Sat Finder])15 * ([wiki:Blind-Scan-Settings#point3.5.1.6 Blind Scan])16 * ([wiki:Create-Transponder-List#point3.5.1.7 Create Transponder List])17 * ([wiki:Create-Default-Favorites#point3.5.1.8 Create Default Favorites])18 19 20 [[br]]21 -
wiki/pages/de/Child-Protection
r37662 r43267 1 [[TranslatedPages]]2 >----3 >'''3.6.12 Child Protection''' [=#point3.6.12] ([#point3.6 Settings (Back])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/DE/Child_Protection.jpg)]][[BR]]8 >9 > here you can setup your key lock and child portection settings.10 11 [[br]]12 13 14 ||'''Pin Code Menu''' ||Select the pin code used in the menu.||15 ||'''Pin Code Channel:''' || select the pin code used to lock TV Channels.||16 ||'''Protect Channels:''' || Do you wish to enable the locking of protected channels.||17 ||'''Age Protect:''' || do you wish to protect channels based on age restrictions.||18 ||'''Protect Channel Freetime (min''' || After a specific time do you wish to re-enable the lock on protected channels if it is currently beign displayed.||19 ||'''Protect menu:''' || Do you wish to place a lock on the menu of the reciever.||20 21 To __"Store"__ the settings Exit from the Child Protection Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.22 23 [[br]]24 ----25 26 '''Coloured Button's Functions"27 28 The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the cchild protection settings menu29 please see below for more info on the functions of these buttons:.30 31 ||'''Red Button: (Menu Protect)''' ||pressing this button will bring up a list of menu items that a lock may be placed on to limit access to those areas, below is a list of all the menu items displayed in this menu.||32 33 * Soft Cam Pannel34 * Records and EPG35 * Media Center36 * Media Player37 * Extentions38 * System39 * Settigs40 * Information41 * Standby/ Poweroff42 * Main Menu43 * Media Center44 * GUI Restart45 * Power Off46 * Network Restart47 * A/V Settings48 * Adjust49 * Skin50 * Plugins51 * Records52 * EPG Search53 * Common Interface54 * Smart Card Reader55 * Flash Update Online56 * Child Protection57 * Service58 * Sat Finder59 * Epg Short View60 * Single Epg61 * Multi Epg62 * Graphic Epg63 * EPG Search64 * Records65 * Plugins66 * Change Feed67 * TPK Upgrade (Online)68 * TPK Install (Online)69 * TPK Tmp (tmp)70 * TPK Media (media)71 * TPK (remove72 * Channel Service...73 * Common Interface74 * Smart Card Reader75 * Network76 * Harddisk77 * VFDisplay78 * Fancontrol79 * System Update80 * Backup81 * Settings Backup Restore82 * Receiver Unlock83 * A/V Settings84 * Language85 * Timezone86 * Red Button87 * Blue Button88 * Plugin Button89 * Adjust90 * Skin Adjust91 * Screensaver adjust92 * Timeshift Settings93 * Record Path94 * EPG Settings95 * Child Protection96 * Restore Default Settings97 * Video Settings98 * Channel Edit99 * MediaDB Settings100 * Autostart Settings101 * Overclocking Settings102 * Save Settings103 * Service104 * Newsletter105 * About106 * Streaming107 * Atemio (hotline)108 * Titan Changelog109 * GIT Changelog110 * System Info111 * Log112 * System_Status113 * Free Space114 * kernel115 * Mounts116 * Network117 * Ram118 * System Infos119 * Cpu120 * Memory121 * MTD122 * Module123 * Devices124 * Swap125 * Top126 * Prozesslist127 * USB128 * Flashupdate (online)129 * Flashupdate (tmp)130 * USBupdate (online)131 * USBupdate (tmp)132 * Power off133 * Standby134 * Restart135 * GUI Restart136 * Power Off Timer137 * Tuner Configuration138 * Automatic Search139 * Manual Search140 * Manual Search Cable141 * Manual Search Terrestrial142 * Rotor Settings143 * Sat Config144 * Sat Finder145 * Blind scan settings146 * Formatt HDD147 * Filesystem Check148 * Configure149 * Time to Sleep150 * Adapter Settings151 * WLAN Settings -
wiki/pages/de/Child-Safety
r37662 r43267 1 [[TranslatedPages]]2 >----3 >'''3.5.18.5 Jugendschutz''' [=#point3.5.18.5] ([wiki:Auto-Start-Settings#point3.5.18 zurück])4 >5 >6 >7 >[[Image(source:/wiki/Wiki-Pictures/DE/Autostart_Settings-child_safety.jpg)]][[br]]8 >9 10 [[br]]11 12 ||'''Jugendschutz:''' ||aktiviert den Jugendschutz PIN beim Systemstart .||13 ||'''Pin:''' ||bestimmt den Schutzkode beim Sytemstart.||14 15 um die Einstellungen zu speichern und das Menü zu verlassen drücken Sie __"OK"__ oder __"Exit"__ um die Änderungen zu verwerfen.16 17 [[br]] -
wiki/pages/de/Common-Interface
r37662 r43267 1 [[TranslatedPages]]2 >----3 >'''3.5.2 Common Interface''' [=#point3.5.2] ([wiki:Interface-Operation#point3.5 System (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/DE/system-Common_Interface.jpg)]][[BR]]8 >9 >here you can set up your installed cam devices.10 11 [[br]]12 13 Picture:14 ||'''Module Type:''' ||Set the module service type (multiple/ Single Service).||15 16 To __"Store"__ the settings Exit from the Common Interface Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.17 18 [[br]]19 ----20 21 '''Coloured Button's Functions"22 23 The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the Commom Interface menu.24 please see below for more info on the functions of these buttons:.25 26 ||'''Red Button: (Reset)''' ||This will reset the selected Common Interface Module.||27 ||'''Green Button: (Menu)''' ||This will Bring up the advanced Common Interface menu.||28 ||'''Yellow Button: (CAID)''' ||???.||29 ||'''Blue Button: (Channel)''' ||Select the channels the selected CA Module will Decode.||30 ||'''Menu Button: (Setting)''' ||This will show the settings for the selected CA Module.||31 32 -
wiki/pages/de/Configure
r37662 r43267 1 [[TranslatedPages]]2 >----3 >'''File system Check''' [=#point3.50.5.3] ([wiki:Hard-Disk#point3.5.5 hard disk (Back)])4 >5 >Menu Picture place holder:6 >7 >[[Image(http://i.imgur.com/3TwQr.jpg, 400)]][[br]]8 >9 Here you can configure your harddisk select an item and follow tht onscreen prompts.10 Note that you must enable ([wiki:Adjust#point3.6.7 Expertmode]) to show all available configure options in this display.11 [[br]]12 13 [[br]]14 15 ||'''Use as recordings-device''' ||Prepair the storage device for use as a recording medium.||16 ||'''Remove recordings-device''' ||disable the use of the storage device as a recording medium.||17 ||'''Use as plugins-device''' ||Prepair the storage device for use as a plugins medium.||18 ||'''Remove extentions-device''' ||disable the use of the storage device as a extentions medium.||19 ||'''Use as swap-device''' ||Prepair the storage device for use as a swap medium.||20 ||'''Remove swap-device''' ||disable the use of the storage device as a swap medium.||21 ||'''Use as backup-device''' ||Prepair the storage device for use as a backup medium.||22 ||'''Remove backup-device''' ||disable the use of the storage device as a backup medium.||23 24 25 26 27 To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.28 29 30 31 [[br]] -
wiki/pages/de/Contact
r37662 r43267 1 [[TranslatedPages]]2 ----3 '''15 Kontakt''' [=#point15] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])4 ----5 6 Interessierte Externe Developer oder Tester können sich gerne via Skype bei uns melden.7 8 * Skype Chat: "TitanNit Dev Chat"9 * Skype Ansprechpartner: obiwan197610 [[br]]11 [[br]] -
wiki/pages/de/Create-Default-Favorites
r40558 r43267 1 [[TranslatedPages]]2 >----3 >'''3.5.1.8 Create Default Favorites[=#point3.5.1.8] ([wiki:Channel-Service#point3.5.1 Channel-Service (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/DE/Create-Default-Favorites.jpg)]][[br]]7 >8 By selecting this option it will setup the default german favourites lists.9 10 Please note that selecting this button will remove all the user pre programmed in favourites.11 12 in future it may be able to set up favourite lists from the satellites/ providers programed into the tuner.13 14 15 To __"Store"__ the settings by pressing __"OK"__ or press __"Exit"__ to cancel changes.16 -
wiki/pages/de/Create-Transponder-List
r37662 r43267 1 [[TranslatedPages]]2 >----3 >'''3.5.1.7 Create Transponder List''' [=#point3.5.1.7] ([wiki:Channel-Service#point3.5.1 Channel-Service (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/de/Create-Transponder-List.jpg)]][[br]]7 >8 Here you can automatically set up transponders for various services from the TitanNit online repo this will save you from having to manually create these lists from your pc or from a satellite xml generator, this will greatly simpifly channel and tuner setup.9 10 please note that these lists may be out dated and not contain a complete list of transponders for every service.11 12 [[br]]13 14 ||'''Create Transponder (Sat) ''' ||Downloads a list of current transponders from the online repo for all available satellites services. ||15 ||'''Create Transponder (Cable) ''' ||Downloads a list of current transponders from the online repo for all available cable services. ||16 ||'''Create Transponder (Terrestrial) ''' ||Downloads a list of current transponders from the online repo for all available Terrestrial services. ||17 ||'''Create Transponder (All) ''' ||Downloads a list of current transponders from the online repo for all available services. ||18 19 Please note that selecting one of the above options will remove all the transponders from the current channel data and may remove any custom satellite configs and tuner settings.20 21 in future it may merge the current programmed in user assigned transponders.22 23 A rescan will need to be preformed after preforming an option be sure to make a backup before proforming this action to be safe.24 25 26 To __"Store"__ the settings by pressing __"OK"__ or press __"Exit"__ to cancel changes.27 -
wiki/pages/de/DYNDNS-Settings
r37662 r43267 1 [[TranslatedPages]]2 >----3 >'''3.5.4.7 DYNDNS Settings''' [=#point3.5.4.7] ([wiki:Network#point3.5.4 network (Back])4 >5 >Menu Picture place holder:6 >7 >[[Image(http://i.imgur.com/3TwQr.jpg, 400)]][[br]]8 >9 Here you can setup your DYNDNS interface.10 11 [[br]]12 13 ||'''Start on Boot:''' ||Start the DYNDNS server on startup.||14 ||'''User:''' ||setup the username for DYNDNS.||15 ||'''Password:''' ||Set the password for DYNDNS.||16 ||'''DNS NAME:''' ||set the dns name.||17 ||'''DNS Syatem:''' ||???.||18 19 To __"Store"__ the settings Exit from the Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.20 21 [[br]]22 ----23 24 '''Coloured Button's Functions"25 26 The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the epg settings menu.27 please see below for more info on the functions of these buttons:.28 29 ||'''Text Button: (Keyboard)''' ||This will will bring up editor to edit a value or text string.||30 ||'''Green Button: (Start)''' ||Start the DYNDNS server.||31 ||'''Yellow Button: (Stop)''' ||Stop the DYNDNS server.|| || -
wiki/pages/de/Default-Autostart
r37662 r43267 1 [[TranslatedPages]]2 >----3 >'''3.5.18.1 Allgemein''' [=#point3.5.18.1] ([wiki:Auto-Start-Settings#point3.5.18 zurück)])4 >5 >6 >7 >[[Image(source:/wiki/Wiki-Pictures/DE/Autostart_Settings-default_Autostart.jpg)]][[br]]8 >9 10 [[br]]11 12 ||'''Startabbruch:''' ||???.||13 ||'''Debug:''' ||Hier wird der Debug Modus und die Debug Art aktiviert um Fehler besser eingrenzen zu können.||14 ||'''Zeige IP Adresse:''' || ??? ||15 ||'''Update Liste:''' ||??.||16 17 Um die gemachten Einstellungen zu speichern und das Menü zu verlassen drücken Sie __"OK"__ oder __"Exit"__ um die Änderungen zu verwerfen.18 -
wiki/pages/de/Development
r41680 r43267 1 [[TranslatedPages]]2 ----3 '''11 Entwicklung''' [=#point11] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([wiki:WikiStart#point0 Sprachauswahl])4 5 ----6 7 8 == Skins Bauen am PC ==9 10 Um den skinnern das leben zu erleichtern habe ich mal das aktuelle titan als VMWARE image zusammen gestellt.11 12 13 ''' Vorschau Video '''14 15 [http://beta.dyndns.tv/dev-tools/play_titan_ubuntu_fb.htm Ubuntu TitanNit mit aktivierten Framebuffer]16 [http://beta.dyndns.tv/dev-tools/play_titan_ubuntu_nofb.htm Ubuntu TitanNit ohne Framebuffer]17 18 19 ''' Download '''20 21 [http://beta.dyndns.tv/dev-tools/TitanNit_r31365_titandev_VMware_Player_Ubuntu_14.04_mini_32bit.rar TitanNit_r31365_titandev_VMware_Player_Ubuntu_14.0 4_mini_32bit]22 23 24 ''' User Daten '''25 26 {{{27 user: titandev28 pass: titandev29 }}}30 31 32 ''' Benutzung '''33 34 {{{35 1. vmware player installieren36 2. image laden37 3. image starten38 4. am ubuntu anmelden user: titandev pass: titandev39 5. titan starten mit befehl: start.sh40 6. passwort eingeben41 }}}42 43 44 ''' Steuerung '''45 46 {{{47 ok = enter48 exit = esc49 tvradio= c50 up= <pfeil hoch>51 down= <pfeil runter>52 left= <pfeil links>53 right= <pfeil rechts>54 menu= m55 ff= .56 fr= ,57 volup= +58 voldown= -59 mute= s60 red= <f1>61 green= <f2>62 yellow= <f3>63 blue= <F4>64 play= p65 record= r66 info= i67 text= t68 power= x69 chup= <Bild runter>70 chdown= <Bild hoch>71 epg= g72 1= 173 2= 274 3= 375 4= 476 5= 577 6= 678 7= 779 8= 880 9= 981 0= 082 }}}83 84 85 86 ----87 88 == Plugins Bauen ==89 90 ''' Vorbereitung '''91 92 Im aktuellen git https://github.com/TitanNit/sh4.git kann man nun TitanNit Plugins bauen. Man kann sich dann seinen Stand lokal erweitern und eigene Plugins bauen.93 94 Man sollte als user angemeldet sein nicht als root.95 96 wer ein frisches git benutzt muss einmal wie folgt vorgehen.97 98 Beispiel ist für arm / Mutant Hd 6199 100 {{{101 su username102 git clone https://github.com/TitanNit/sh4.git $HOME/titannit103 sudo $HOME/titannit/cdk/prepare-for-bs.sh104 cd $HOME/titannit105 ./start.sh clone106 cd $HOME/titannit/cdk107 ./make.sh 37 1 1 1 6108 109 make titan-plugins110 }}}111 112 113 ----114 115 durchlaufen lassen, danach reicht dann immer ein116 117 {{{118 make titan-plugins-clean119 make titan-plugins120 }}}121 122 123 ----124 125 um ein neues Plugin einzubinden muss man folgende Dateien erweitern126 127 {{{128 $HOME/titannit/cdk/source/titan/plugins/Makefile.am129 $HOME/titannit/cdk/source/titan/plugins/configure.ac130 }}}131 132 133 ----134 135 an folgender Datei136 137 {{{138 Makefile.am139 }}}140 141 die newpluginname Zeile einfügen142 143 {{{144 SUBDIRS = \145 autotimer \146 browser \147 callmonitor1 \148 catcatch \149 dlna \150 dvdplayer \151 facebook \152 filemanager \153 gmediarender \154 hello \155 imdb \156 imdbapi \157 instar \158 keylock \159 kravencfg \160 lcdpearl1 \161 lcdsamsung \162 mboxinfo \163 mc \164 networkbrowser \165 optimize \166 panel \167 permtime \168 readerconfig \169 rgui \170 scriptexec \171 stock \172 stopifnotused \173 streaminfo \174 sudoku \175 tinews \176 tithek \177 tiwakeup \178 tsSchnitt \179 tmc \180 tmdb \181 TopfieldVFD \182 usbreset \183 weather \184 wins3 \185 wm2014 \186 xupnpd \187 newpluginname \188 zapback189 }}}190 191 192 ----193 194 an folgender Datei195 196 {{{197 configure.ac198 }}}199 200 die newpluginname Zeile einfügen201 202 {{{203 AC_OUTPUT([204 Makefile205 autotimer/Makefile206 browser/Makefile207 callmonitor1/Makefile208 catcatch/Makefile209 dlna/Makefile210 dvdplayer/Makefile211 facebook/Makefile212 filemanager/Makefile213 gmediarender/Makefile214 hello/Makefile215 imdb/Makefile216 imdbapi/Makefile217 instar/Makefile218 keylock/Makefile219 kravencfg/Makefile220 lcdpearl1/Makefile221 lcdsamsung/Makefile222 mboxinfo/Makefile223 mc/Makefile224 networkbrowser/Makefile225 optimize/Makefile226 panel/Makefile227 permtime/Makefile228 readerconfig/Makefile229 rgui/Makefile230 scriptexec/Makefile231 stock/Makefile232 stopifnotused/Makefile233 streaminfo/Makefile234 tinews/Makefile235 tithek/Makefile236 tiwakeup/Makefile237 tmc/Makefile238 tmdb/Makefile239 TopfieldVFD/Makefile240 tsSchnitt/Makefile241 sudoku/Makefile242 usbreset/Makefile243 weather/Makefile244 wins3/Makefile245 wm2014/Makefile246 xupnpd/Makefile247 zapback/Makefile248 newpluginname/Makefile249 ])250 }}}251 252 253 ----254 255 und einen neuen plugin ordner anlegen.256 257 {{{258 mkdir $HOME/titannit/cdk/source/titan/plugins/newpluginname259 }}}260 261 262 ----263 264 jetzt muss man folgende dateien anlegen265 266 {{{267 touch $HOME/titannit/cdk/source/titan/plugins/newpluginname/Makefile.am268 touch $HOME/titannit/cdk/source/titan/plugins/newpluginname/newpluginname.c269 }}}270 271 und danach editieren. wie die dateien auszusehen haben kann man sich in den anderen plugins abschauen272 273 274 ----275 276 um es zu bauen einfach wieder277 278 {{{279 make titan-plugins-clean280 make titan-plugins281 }}}282 283 284 ----285 286 um den kompletten stand neu zu laden kann man folgendes machen. Vorsicht der titan src wird komplett neu geholt und alle änderungen gehen verloren.287 288 {{{289 make titan-plugins-distclean290 make titan-plugins291 }}}292 293 ---- -
wiki/pages/de/Devices
r37662 r43267 1 [[TranslatedPages]]2 >----3 >'''3.7.8.6.5 Devices''' [=#point3.7.8.6.5] ([wiki:System-Infos#point3.7.8.6 System Infos (Back])4 >5 >Menu Picture place holder:6 >7 >[[Image(http://i.imgur.com/3TwQr.jpg, 400)]][[br]]8 >9 Here you can view the detailed loaded devices info.10 11 [[br]]12 13 14 [[br]] -
wiki/pages/de/EPG-Search
r37662 r43267 1 [[TranslatedPages]]2 >----3 >'''3.1.4 EPG Suche''' [=#point3.1.4] ([wiki:Interface-Operation#point3.1 Timer und EPG (zurück])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/DE/Epg_Search.jpg)]][[BR]]7 >8 Hier können Sie nach Sendung suchen.[[BR]]9 Mit der '''roten Taste''' können Sie das Timer Menü aufrufen. [[BR]]10 Mit der '''Grünen Taste''' können Sie nach einem Sendungs- / Filmtitel suchen. [[BR]]11 Mit der '''gelben Taste''' durchsuchen Sie die Beschreibung der Sendungs- Filminformation [[BR]]12 und mit der '''Blauen Tasten''' durchsuchen sie beides. [[BR]]13 Die '''Menü Taste''' durchsucht die Genre Sparte des EPG.[[br]]14 15 Für Informationen wie Sie eine Aufnahme programmieren drücken Sie ([wiki:Records#point3.10.5 Aufnahmen])16 17 18 19 -
wiki/pages/de/EPG-Settings
r37662 r43267 1 [[TranslatedPages]]2 >----3 >'''3.6.11 EPG Settings''' [=#point3.6.11] ([wiki:Interface-Operation#point3.6 Settings (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/DE/EPG_Settings.jpg)]][[BR]]8 >9 >Here you can change your epg settings.10 11 [[br]]12 13 14 ||'''EPG Path''' ||Set to any Path you want where the EPG File should be stored (on Receivers with little Memory it is strongly recommended to extend it by using a USB Pen-Drive or Harddisk)||15 ||'''How Many Days:''' ||The Number of Days in Advance of the EPG to store (I recommend no higher than 8 Days)||16 ||'''Delete EPG after read:''' ||Do you want the EPG file to be deleted after being read.||17 ||'''EPG Save Mode:''' ||When should the EPG Data be stored to the storage medium. Caution: Should you not use a Pen Drive or Harddisk for EPG Storage set to Never, as Receivers with little Memory on Board tend to crash due to Insufficient free space.||18 ||'''Show EPG Screen (EPG Button):''' ||Which EPG format should be shown on EPG Key-press on the Remote.||19 ||'''EPG Free Space (kb):''' ||Total of minimal Free Memory that should be kept on the medium where the epg is stored to aviod free space errors.||20 ||'''EPG List Mode:''' ||What Channels should be scanned in the background (Only for twin Receivers) for EPG (scan)(whitelist) (scanlist and whitelist) (deactivate (disable scan)).||21 ||'''EPG Scan Time:''' ||Here you can set the time of the automatic EPG scan. The Scan will be performed every Day at that set time. Should the Receiver be in Deep Stand-by it will "wake up" aprox. 5 Minutes before the scan is due to start.||22 ||'''EPG Button in EPG:''' ||Behavior of the EPG Button during EPG display.||23 ||'''Grafic EPG Zoom:''' ||Sets the zoom level of the EPG to show more or less of a time span of the shown programs.||24 ||'''Grafic EPG Picons:''' ||Set to yes to use picons or the alternative Picon sets in the infobar and EPG stored in /var/media/autofs/sda1/swapextensions/usr/local/share/titan/picons/ directory.||25 ||'''Delete EPG Before Scan:''' ||Should the EPG be deleted before a the timed scan.||26 ||'''After EPG Scan:''' ||Behavior after the EPG scan is completed EPG scan: Nothing (Stand-By) or Switch Off (Deep Stand-By).||27 ||'''MHW EPG:''' ||Scan for a Media Highway EPG stream during EPG scan.||28 ||'''MHW2 EPG:''' ||Scan for a Media Highway version 2 EPG stream during EPG scan.||29 ||'''OpenTV EPG:''' ||Scan for an OpenTV EPG stream during EPG scan.||30 31 To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.32 33 [[br]]34 ----35 36 '''Coloured Button's Functions"37 38 The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the epg settings menu.39 please see below for more info on the functions of these buttons:.40 41 ||'''Red Button: (EPG Reset)''' ||This will reset the saved epg removing all program data.||42 ||'''Green Button: (Edit)''' ||On a customisable item this will bring up editor to edit a value or text string.||43 ||'''Yellow Button: (Scanlist)''' ||Brings up the epg scan list and you may from there add aditional boquets to be scaned during an epg scan.||44 ||'''Blue Button: (log)''' ||This will show you the past scan log history for the epg.||45 -
wiki/pages/de/EPG-Short-View
r37662 r43267 1 [[TranslatedPages]]2 >----3 >'''EPG-Kurzübersicht''' [=#point3.1.1] ([wiki:Interface-Operation#point3.1 Records and EPG(Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/DE/EPG_Short_View.jpg)]][[BR]]7 >8 9 Vollständige EPG Übersicht aller verfügbaren Nachfolgesendungen auf dem aktuellen Sender. [[BR]] -
wiki/pages/de/External-Software-E2WebIfAPI
r37662 r43267 1 [[TranslatedPages]]2 ----3 '''9.4 E2WebIfAPI''' [=#point9.4] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])4 ----5 6 == Einführung ==7 Enigma2 Webinterface (WebIf) API wurde für Dreambox definiert.8 Es ist ein Protokoll, welches die Steuerung von Dreambox mittels HTTP-Anfragen erlaubt.9 10 Typische Steuerungsaufgaben sind:11 12 * Programmierung (Timer) und Wiedergabe von Aufnahmen13 * Live-Streaming (TV und Radio)14 * EPG-Funktionen (Anzeige, Suche)15 * Fernbedienung (Remote Control)16 17 Einen guten Überblick zum Protokoll findet Ihr im [http://dream.reichholf.net/wiki/Enigma2:WebInterface DreamboxWIKI].18 19 == Motivation ==20 21 Für TitanNit wurde die Android-App [TiMote#point9.1 tiMote] entwickelt. Mit dieser App steht die oben beschriebene Funktionalität zur Verfügung. D.h. jeder der ein Android-Handy bzw. -Tablett besitzt, kann den TitanNit-Receiver steuern und sogar auf dem Handy fernsehen. Das ist eine coole Sache, oder?22 23 Dieses Glück hat jedoch der Besitzer eines iOS-Geräts (iPhone, iPad) nicht mehr.24 Man kann zwar auch mit einem Web-Browser plattformunabhängig (Windows, Linux, Android, iOS) den Receiver steuern, dies ist aber nicht so komfortabel wie mit tiMote.25 26 Anderseits gibt es sowohl für iOS als auch Android schon fertige Apps für Dreambox-Receiver. Diese Apps basieren auf dem E2-WebIf-Protokoll. Könnte man nicht diese Apps ebenfalls für TitanNit-Receiver verwenden statt eine neue App für iOS zu entwickeln?27 28 == Die Lösung ==29 TitanNit besitzt schon ein eigenes Protokoll, welches jedoch mit Enigma2 WebIf nicht kompatibel ist.30 Nach kurzer Analyse wurde festgestellt, dass eine Konvertierung der E2-Anfragen auf TitanNit-Anfragen nicht so schwer ist.31 Deswegen wurde ein E2-Web-Server (e2webserv) entwickelt, welches das Enigma2 WebIf implementiert. Dieser Server empfängt die E2-Anfragen, delegiert die Aufrufe zum lokalen TitanNit Web-Server und die TiatnNit-Antworten wandelt zurück ins XML-Format, welches vom E2-Client erwartet wird.32 33 Auf diese Weise wird die TitanNit-Box jetzt offen für die vorhandene E2-Clientsoftware.34 35 36 == Voraussetzungen ==37 38 * Web-Server muss auf dem Receiver aktiviert werden39 * e2webserv muss auf dem Receiver installiert werden40 41 == iOS-Apps ==42 43 Folgende Apps habe ich auf meinem iPad2:44 * dreaMote45 * dreaMote Lite46 * e2RemoteHD47 * Dreambox Live48 49 Falls Ihr im App-Store nichts kaufen wollt, dann kann ich dreaMote Lite empfehlen.50 51 Zusätzlich zu der App benötigt Ihr einen Player.52 53 Ich habe folgende Player ausprobiert, welche bei mir gut funktionieren:54 * GoodPlayer55 * BUZZ Player56 * OPlayerHD Lite57 * VLC Player58 59 VLC und OPlayerHD Lite sind frei.60 61 == XBMC ==62 63 Falls Ihr die Media-Center-Software [http://xbmc.org/ XBMC] im Einsatz habt, so könnt Ihr mittels Live-TV-Plugin VU+ Euren TitanNit-Receiver direkt einbinden.64 XBMC läuft auf einem PC sowohl unter Windows als auch Linux, ist aber auch für Raspberry Pi verfügbar.65 66 == VLC ==67 Mit dem installierten e2webserv könnt Ihr Live-Streaming nur mittels [http://www.videolan.org/vlc/ VLC] (ohne extra Software) auf einem PC (Windows oder Linux) genießen.68 69 Ihr braucht dafür nicht die Kanäle manuell umschalten, es passiert alles automatisch. Damit dies möglich wird, braucht Ihr eine M3U-Playliste. Solche Playliste könnt Ihr pro Favorit generieren lassen und auf dem PC speichern. Danach einfach M3U-Datei mit VLC öffnen und das gewünschte Programm anklicken.70 71 Wie exportiert man die M3U-Datei für eine bestimmte Favoritenliste?72 73 In einem Web-Browser einfach die gewünschte Adresse angeben.74 75 Beispiel (Favorit heißt "Polish"):76 77 [http://192.168.1.1:8080/web/services.m3u?bRef=Polish]78 79 Bei dem Link muss nur die eigene IP-Adresse angegeben werden und bei Namen mit Leerzeichen sollte man "%20" statt des Leerzeichen nehmen.80 81 Beispiel (Favorit heißt "Mein TV", Receiver-IP: 192.168.0.10):82 83 [http://192.168.0.10:8080/web/services.m3u?bRef=Mein%20TV]84 85 == Client-Konfiguration ==86 Bitte bei dem E2-Client folgendes konfigurieren:87 * IP-Adresse des Receivers88 * Port: 808089 * Streaming Port: 800190 91 Zu beachten ist, dass SSL nicht unterstützt wird.92 93 Unten sieht man eine Beispielkonfiguration für dreaMote.94 95 [[Image(DreaMote.png, 384px)]]96 97 == e2webserv.conf ==98 99 Die Konfiguration für den Server muss man bei Bedarf manuell anpassen.100 Bei Standard-TitanNit-Konfiguration sollten keine Änderungen in e2webserv.conf notwendig sein.101 102 Bei einer Flash-Installation liegt die Konfigurationsdatei '''e2webserv.conf''' in dem Verzeichnis '''/mnt/swapextensions/etc'''103 104 Hier ist der Inhalt:105 {{{106 # e2 web port107 port=8080108 # e2 data port109 dataPort=8001110 # titan web port111 titanPort=80112 # titan data port113 titanDataPort=22222114 # titan host (change it if e2webserv is not running locally on the receiver)115 titanHost=127.0.0.1116 # automatic switching of channels117 # It is useful if you don't want manually switch a channel on receiver with a single tuner.118 # If it is set to false and you have a single tuner the you can stream only channels located119 # on the same transponder as the current channel active on the receiver.120 autoZap=true121 # log output file122 logFile=/tmp/e2webserv.log123 # maximal log file size in KB. Set it to 0 (default 10KB) to disable logging (maximal allowed value is 1024).124 # When the file limit is reached a backup of the current file is created.125 # It means maximally 2 x maxLogSize KB will be used.126 maxLogSize=10127 # thread pool size (1..8)128 threadPool=2129 # Directory where the transponder and bouquet files are located.130 # You don't need to specify it, it will be automatically discovered.131 # But if you you start e2webserv not on the receiver (but e.g. on your Linux server or Windows computer) then you132 # should copy the settings (channel, transponder, provider and all bouquets file) and specify here the location on the local computer.133 titanDir=/mnt/settings134 }}}135 == Links ==136 137 * Enigma2 Web-API im [http://www.aaf-digital.info/forum/showthread.php?90948-Enigma2-Web-API-f%FCr-Titan AAF-Forum]138 * Sources auf [https://github.com/gswiatek/e2api4titan GitHub]139 140 [[br]]141 [[br]] -
wiki/pages/de/External-Software-SatChannelListEditor
r37662 r43267 1 [[TranslatedPages]]2 ----3 '''9.3 SatChannelListEditor''' [=#point9.3] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])4 ----5 Diese Anleitung bezieht sich auf die Version 5.0 von SatChannelListEditor. In zukünftigen Versionen werden evtl. neue Features hinzugefügt, wodurch sich die Ansicht des Programms ändern kann und nicht mehr den Screenshots in dieser Anleitung entspricht.6 7 == Voraussetzungen ==8 SatChannelListEditor wurde für die Laufzeitumgebung „Microsoft .NET Framework“ programmiert. Aktuell wird mindestens .NET Framework 2.0 benötigt.9 10 (siehe auch [http://de.wikipedia.org/wiki/.NET_Framework Wikipedia-Artikel zu .NET Framework])11 12 == Windows ==13 * Bei Windows XP muss .NET Framework in der Version 2.0, 3.0 oder 3.5 installiert werden. (3.0 und 3.5 sind erweiterte Versionen und beinhalten 2.0)14 * Bei Windows Vista und Windows 7 ist das .NET Framework bereits in der richtigen Version vorhanden und muss nicht nachinstalliert werden.15 * Bei Windows 8 muss das .NET Framework 3.5 installiert werden, da Windows 8 standardmäßig nur das .NET Framework 4.5 enthält, welches nicht mehr kompatibel zu SatChannelListEditor ist16 17 == Linux ==18 Bei Linux ist das Mono-Framework erforderlich (siehe [http://de.wikipedia.org/wiki/Mono-Projekt Wikipedia-Artikel zu Mono-Projekt]).19 [[BR]] Evtl. müssen WinForms libraries nachinstalliert werden mit "apt-get install libmono-winforms*"20 [[BR]] Gestartet wird das Programm dann auf der Kommandozeile mit dem Befehl „mono SatChannelListEditor.exe“.21 22 == Mac OS ==23 Bei Mac OS ist, wie bei Linux, das Mono-Framework erforderlich, damit SatChannelListEditor funktioniert.24 25 == Der erste Start ==26 Nach dem ersten Start ist SatChannelListEditor auf Englisch eingestellt und hat den Receiver „UFS-821“ ausgewählt.27 Nun muss als erstes die richtige Sprache und anschließend der richtige Receiver ausgewählt werden.28 29 == Einstellen der Sprache ==30 Wählen Sie im Menu unter dem Punkt „Options“ den Punkt „Language“:31 32 [[Image(source:/wiki/Wiki-Pictures/DE/SCLE/1.png)]]33 34 Darauf erscheint ein neues Fenster, wo Sie die Sprache auswählen und mit „OK“ bestätigen müssen:35 36 [[Image(source:/wiki/Wiki-Pictures/DE/SCLE/2.png)]]37 38 == Einstellen des Receiver-Typs bzw. Receiver-Betriebssystems ==39 Wählen Sie im Menu unter dem Punkt „Optionen“ den Punkt „Einstellungen“:40 41 [[Image(source:/wiki/Wiki-Pictures/DE/SCLE/3.png)]]42 43 Wählen Sie im darauf erscheinenden Fenster als Receiver „Titan“ aus:44 45 [[Image(source:/wiki/Wiki-Pictures/DE/SCLE/4.png)]]46 47 Wechseln Sie anschließend noch auf die Registerkarte „Titan“ und stellen dort die IP-Adresse ihres Receivers ein, bevor Sie das Fenster mit dem OK-Knopf wieder schließen. Die anderen Einstellungen auf dieser Seite müssen nicht verändert werden.48 49 [[Image(source:/wiki/Wiki-Pictures/DE/SCLE/5.png)]]50 51 == Download und Upload der Kanalliste ==52 Nachdem der Receiver-Typ und die IP-Adresse festgelegt wurden, können Sie die Kanalliste von ihrem Receiver herunter laden (Download) und nach Bearbeitung wieder an den Receiver schicken (Upload).53 [[BR]] Benutzen Sie dafür die beiden Knöpfe in der Werkzeugleiste oder im Menu:54 55 [[Image(source:/wiki/Wiki-Pictures/DE/SCLE/6.png)]]56 57 [[Image(source:/wiki/Wiki-Pictures/DE/SCLE/7.png)]]58 59 Wenn Sie einen Upload oder Download starten wird automatisch auf das Meldungs-Fenster gewechselt, wo Statusmeldungen zum Datei-Transfer angezeigt werden.60 61 == Bearbeiten der Kanalliste ==62 63 === Favoriten ===64 Alle TV- und Radio-Kanäle werden in den Registerkarten „TV“ und „Radio“ im Hauptfenster von SatChannelListEditor angezeigt. Normalerweise befinden sich mehrere hundert oder tausend Kanäle in dieser Liste.65 [[BR]] Um die Navigation auf dem Receiver zu erleichtern, kann man die Kanäle einem oder mehreren Favoriten (auch Bouquets genannt) zuordnen.66 Die Favoriten bestimmen auch die Nummer der Kanäle, mit der Sie die Kanäle direkt über die Fernbedienung anwählen können.67 [[BR]] Erstellen Sie einen neuen Favoriten, indem Sie mit der rechten Maustaste im Baum der Favoriten klicken:68 69 [[Image(source:/wiki/Wiki-Pictures/DE/SCLE/8.png)]]70 71 Vergeben Sie anschließend den gewünschten Namen:72 73 [[Image(source:/wiki/Wiki-Pictures/DE/SCLE/9.png)]]74 75 Sie können nun Kanäle zu diesem Favoriten hinzufügen, indem Sie die Kanäle per Drag&Drop auf den neu erzeugten Favoriten schieben oder indem Sie auf dem Kanal mit der rechten Maustaste klicken und im Menu „Zu Favorit hinzufügen“ wählen:76 77 [[Image(source:/wiki/Wiki-Pictures/DE/SCLE/10.png)]]78 79 Nachdem ein Kanal zu einem Favoriten hinzugefügt wurde, erhält er auch eine Kanalnummer. Der erste Kanal im ersten Favoriten erhält die Nummer 1:80 81 [[Image(source:/wiki/Wiki-Pictures/DE/SCLE/11.png)]]82 83 Wenn ein Kanal mehreren Favoriten zugeordnet ist, bekommt er auch mehrere Kanalnummern:84 85 [[Image(source:/wiki/Wiki-Pictures/DE/SCLE/12.png)]]86 87 === Der Favorit „EPG Scan“ ===88 Für TV-Kanäle gibt es einen speziellen Favoriten namens „EPG Scan“. Fügen Sie alle Kanäle, für die TitanNit automatisch den EPG laden soll, zu diesem Favoriten hinzu.89 90 [[Image(source:/wiki/Wiki-Pictures/DE/SCLE/13.png)]]91 92 === Anlegen und Bearbeiten von Satelliten ===93 Wechseln Sie auf die Registerkarte „Satelliten“. Nach einem Klick auf die rechte Maustaste erscheint Menu, wo Sie einen neuen Satelliten anlegen oder einen bestehenden bearbeiten können. Doppel-Klick auf einen bestehenden Satelliten öffnet diesen ebenfalls zur Bearbeitung.94 95 [[Image(source:/wiki/Wiki-Pictures/DE/SCLE/14.png)]]96 97 [[Image(source:/wiki/Wiki-Pictures/DE/SCLE/15.png)]]98 99 === Anlegen und Bearbeiten von Transpondern ===100 Wechseln Sie auf die Registerkarte „Transponder“. Nach einem Klick auf die rechte Maustaste erscheint ein Menu, wo Sie einen neuen Transponder anlegen oder einen bestehenden bearbeiten können. Doppel-Klick auf einen bestehenden Transponder öffnet diesen ebenfalls zur Bearbeitung.101 102 [[Image(source:/wiki/Wiki-Pictures/DE/SCLE/16.png)]]103 104 [[Image(source:/wiki/Wiki-Pictures/DE/SCLE/17.png)]]105 106 === Anlegen und Bearbeiten von Kanälen ===107 Wechseln Sie auf die Registerkarte „TV“ oder auf die Registerkarte „Radio“. Nach einem Klick auf die rechte Maustaste erscheint Menu, wo Sie einen neuen Kanal anlegen oder einen bestehenden bearbeiten können. Doppel-Klick auf einen bestehenden Kanal öffnet diesen ebenfalls zur Bearbeitung.108 109 [[Image(source:/wiki/Wiki-Pictures/DE/SCLE/18.png)]]110 111 [[Image(source:/wiki/Wiki-Pictures/DE/SCLE/19.png)]]112 113 == Arbeiten mit Receiver-Profilen ==114 Wenn Sie mehrere Receiver besitzen empfiehlt es sich, mit Profilen zu arbeiten. Gehen Sie dazu zu den Einstellungen und aktivieren das Häkchen bei „Receiver Profile verwenden“:115 116 [[Image(source:/wiki/Wiki-Pictures/DE/SCLE/20.png)]]117 118 Geben sie anschließend einen Namen für das Profil ein und klicken auf den Knopf „Speichern“. Das Profil wird nun mit den aktuell auf der Registerkarte „Titan“ festgelegten Einstellungen erzeugt.119 [[BR]] Um ein Profil für einen zweiten Titan-Receiver zu erzeugen wechseln Sie auf die Registerkarte „Titan“, geben dort die IP-Adresse des zweiten Receiver ein, wechseln zurück auf die Registerkarte „Allgemein“, geben einen neuen Profilnamen an und klicken erneut auf „Speichern“.120 121 Wenn sie das Einstellungs-Fenster nun über den OK-Knopf schließen, befindet sich im Hauptfenster eine neue Auswahlbox, wo Sie zwischen den Profilen umschalten können:122 123 [[Image(source:/wiki/Wiki-Pictures/DE/SCLE/21.png)]] -
wiki/pages/de/External-Software-TiMote
r37662 r43267 1 [[TranslatedPages]]2 ----3 '''9.1 TiMote''' [=#point9.1] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])4 5 ----6 [[br]]7 Timote ist eine Universalfernbedienung für linux basierte Receiver.8 Aktuell werden (Atemio) Titannit, Enigma2 und Neutrino unterstützt.9 10 Features:11 - Bouquets / Favoriten anzeigen12 - EPG anzeigen13 - EPG durchsuchen (*)14 - aktuellen Sender anzeigen15 - Aufnahmen anzeigen, streamen und löschen (*)16 - Timer erstellen, editieren und löschen17 - Satfinder (*)18 - Powercontrol19 - virtuelle Fernbedienung20 - Nachrichten21 (*) Titannit/E2 only22 23 Für das Streaming sollte ein geeigneter Player, z.B. MX Player, VPlayer oder BSPlayer (lite) installiert sein.24 Wenn die App abstürzt aktivieren sie bitte "automatisches Fehlerbericht senden" in den Einstellungen. Sie können25 dadurch helfen die Software zu verbessern und dem Entwickler die Fehlersuche entscheidend erleichtern.26 Kommentare, Fragen, Anregungen oder Wünsche? Schreiben mir eine Email oder hinterlasst auf der Homepage einen Kommentar!27 28 29 [[Image(http://www.android.com/images/brand/get_it_on_play_logo_large.png)]]30 [[br]]31 [https://play.google.com/store/apps/details?id=eu.azato.timote PlayStore] -
wiki/pages/de/External-Software-TiView
r37662 r43267 1 [[TranslatedPages]]2 ----3 '''9.2 TiView''' [=#point9.2] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])4 ----5 Die TiView ist eine Software für Windows im Zusammenhang mit dem Titan und E2-Images.[[br]]6 Das Tool nutzt die HTTP-RAW-Api von TitanNit bzw die HTTP-XLM-Api von Enigma2.[[br]]7 Es ist als 32bit und 64bit Version verfügbar.[[br]]8 [[br]]9 ''Highlights von TiView''10 11 - *Wiedergabe des TV-Bildes am PC12 - *Wiedergabe von Aufnahmen am PC13 - *PiP Funktion für gleichzeitige Wiedergabe von 2 Streams/Aufnahmen am PC14 - *Proxy Funktion für den Zugriff einer Remote TiView und Streaming per runtergerechneten Stream15 - Verwaltung der Aufnahmetimer16 - Infobar zum laufenden Programm mit Fortschrittanzeige17 - Picon-Anzeige in der Infobar(dazu die TiView_picons.zip in das TiView Verzeichniss entpacken)18 - SenderEPG19 - MultiEPG20 - grafisches MultiEPG21 - EPG Suche22 - Übersicht der Aufnahmen23 - Profilverwaltung bei Verwendung mehrere Boxen24 - Signal-Monitor25 - Nachrichtenversand zur Box26 - OSD-Screenshot erstellen27 '''*Für die Wiedergabe am PC wird ein installierter VLC Player in der ensprechenden Version(32/64bit) wie der TiView benötigt.'''[[br]]28 (Alternativ kann auch die libvlc.dll, libvlccore.dll, libgcc_s_seh-1.dll(nur bei 64bit) und der Plugins Ordner von VLC in den TiView Ordner kopiert werden)29 30 [[br]] -
wiki/pages/de/External-Software-TitanMote
r37662 r43267 1 [[TranslatedPages]]2 ----3 '''9.7 TitanMote''' [=#point9.7] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 ----5 6 [[br]]7 8 Titanmote is a universal remote control for Linux-based receivers.9 Currently there is a little information we can provide reguarding this from the developer jagabongo.10 11 ''Words from the developer:''12 ----13 I'm currently working on an iOS app for TitanNit . For this I would need a few beta testers .14 15 The app will cost money later when development is finished and will be able to be purchased from the store, I will not releace it free because I have specially bought for this purpose a developer account and will take many hours of development, I also do not want the app to feature advertising.16 17 requirements:18 - IPhone or iPad with iOS > = 7.019 - A bit of technical understanding20 - Lust for testing21 22 A few recent screenshots :23 https://www.dropbox.com/sh/armi0c3q72i350h/vm3szZDzvK24 25 26 So in Version 1 I should be able to:27 28 - Browse by bouquets / channel lists + See Epg info and switch Channels.29 - Add timers on an event with the epg data.30 - List all timer31 - Delete Timer32 - easy remote copy with touch buttons33 - 2 profiles34 - Everywhere pull to refresh .35 - [ EDIT] Forgot , it will be multilingual or , DE, FR, IT and rest English. But languages are all relatively retrofitted without hazzle36 37 Future features:38 39 - User: Password WebIf Auth . ( hopefully not often used)40 41 - Https support. ( Was I already am going to test with self-signed stuff but totally in the pants ... )42 43 - The stream to an iOS device is just not as easy as on Android that is why they first moved to the rear.44 45 46 BETA testing runs like this:47 48 * 1 You send with your UUID ( google iOS Device UUID to find out )49 50 * 2 Your you created an account at https://build.phonegap.com ( Free is sufficient).51 52 * 3 You share me with your UUID and email phonegap.build accounts.53 54 When that's done you can you log on your mobile Safari in build.phonegap.com and always install it there through the browser to the latest build. (OTA Installation).55 56 This is perfectly legal and possible even without jailbreak.57 58 59 if you are intreseed in becomming a better tester please leave a message in the [[http://www.aaf-digital.info/forum/showthread.php?100699-iOS-TitanNit-iOS-App-!-titanMote-!-Tester-gesucht!&p=974748#post974748 | forum]]. -
wiki/pages/de/File-Browser
r37662 r43267 1 [[TranslatedPages]]2 >----3 >'''3.2.5 File Browser''' [=#point3.2.5] ([#point3.2 Media center (Back])4 >5 >Menu Picture place holder:6 >7 >[[Image(http://i.imgur.com/3TwQr.jpg, 400)]][[br]]8 >9 >Here you can browse files from any source available from your decoder (local or network)10 > you may do such things as copy delete and move.11 12 13 [[br]] -
wiki/pages/de/Format-Hdd
r37662 r43267 1 [[TranslatedPages]]2 >----3 >'''3.5.5 Hard Disk''' [=#point3.5.5] ([wiki:Interface-Operation#point3.5 system (Back)])4 >5 >Menu Picture place holder:6 >7 >[[Image(http://i.imgur.com/3TwQr.jpg, 400)]][[br]]8 >9 Here you can format your harddisk select an item and follow tth onscreen prompts.10 Note that you must enable ([wiki:Adjust#point3.6.7 Expertmode]) to show all available format options in this display.11 12 [[br]]13 14 15 16 17 [[BR]] -
wiki/pages/de/Free-Space
r37662 r43267 1 [[TranslatedPages]]2 >----3 >'''3.7.8.2 Free Space''' [=#point3.7.8.2] (([wiki:System-Info#point3.7.8 System Info (Back])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/DE/System-Info-Free-Space.jpg)]][[br]]7 >8 Here you can view the free space of all the file systems acessable from the decoder.9 10 [[br]]11 12 13 [[br]] -
wiki/pages/de/Functions
r37662 r43267 1 [[TranslatedPages]]2 3 ----4 '''2 Interface Elements''' [=#point2] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])5 ----6 [[br]]7 This section will show the functions and controls of the various elements in the gui within TitanNit and discriptions to the various8 items and their functions aswell as helpfull information and tricks to get the most possible experience with your Receiver.9 10 Note: pictures in this area only apply to the default skin used in Titan.11 If you do not see a specific menu item on the display please select the default skin from the menu as follows all the functions displayed below are implemented in all skins but some elements may be omitted from the display in some skins:12 13 Press the __"Menu"__ button and select __"Settings"__ scroll down to __"Skin"__ and select the __"Default"__ Skin from the menu.14 The decoder will then reboot with the new selected __Default__ skin.15 16 ----17 {{{#!div style="width: 1100px; margin: auto"18 {{{#!table style="border: none"19 {{{#!td align=center valign=top style="border: none; font-size: 115%"20 {{{#!div style="float: left"21 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/Infobar.png,align=left,link=[#point2.1])]]22 }}}23 '''[#point2.1 infobar]'''[[br]]24 {{{#!div style="float: left25 Default display when pressing the __Info__ button while watching TV.26 }}}27 }}}28 {{{#!td align=center valign=top style="border: none; font-size: 115%"29 {{{#!div style="float: left"30 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/playback_infobar.png,align=left,link=[wiki:History#point2.2 TitanNit Info])]]31 }}}32 '''[#point2.2 Playback infobar]'''[[br]]33 {{{#!div style="float: left34 Default display when pressing the __Info__ button while watching A recording or Media using the default player.35 }}}36 }}}37 {{{#!td align=center valign=top style="border: none; font-size: 115%"38 {{{#!div style="float: left"39 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/AudioTracks_infobar.png,align=left,link=[#point2.3])]]40 }}}41 '''[#point2.3 Audiotracks infobar]'''[[br]]42 {{{#!div style="float: left43 Default display when pressing the __Audio__ button while watching TV, A recording or Media using the default player.44 }}}45 }}}46 |----47 {{{#!td align=center valign=top style="border: none; font-size: 115%"48 {{{#!div style="float: left"49 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/Channel History.png,align=left,link=[#point2.4])]]50 }}}51 '''[#point2.4 Channel History]'''[[br]]52 {{{#!div style="float: left53 Default display when pressing the __Recall__ button while watching A recording or Media using the default player.54 }}}55 }}}56 {{{#!td align=center valign=top style="border: none; font-size: 115%"57 {{{#!div style="float: left"58 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/Sleep_Timer.png,align=left,link=[#point2.5])]]59 }}}60 '''[#point2.5 Sleep Timer]'''[[br]]61 {{{#!div style="float: left62 Default display when pressing the __Sleep_ button while the decoder is in operation.63 }}}64 }}}65 {{{#!td align=center valign=top style="border: none; font-size: 115%"66 {{{#!div style="float: left"67 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/Subtitle.png,align=left,link=[#point2.6])]]68 }}}69 '''[#point2.6 Subtitle]'''[[br]]70 {{{#!div style="float: left71 Default display when pressing the __Subtitle__ button while watching TV, A recording or Media using the default player.72 }}}73 }}}74 |----75 {{{#!td align=center valign=top style="border: none; font-size: 115%"76 {{{#!div style="float: left"77 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/EPG.png,align=left,link=[#point2.7])]]78 }}}79 '''[#point2.7 EPG]'''[[br]]80 {{{#!div style="float: left81 Default display when pressing the __EPG__ button while watching TV.82 }}}83 }}}84 {{{#!td align=center valign=top style="border: none; font-size: 115%"85 {{{#!div style="float: left"86 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/program_info.png,align=left,link=[#point2.8])]]87 }}}88 '''[#point2.8 Program Info]'''[[br]]89 {{{#!div style="float: left90 Default display when pressing the __Info__ button while viewing the EPG.91 }}}92 }}}93 {{{#!td align=center valign=top style="border: none; font-size: 115%"94 {{{#!div style="float: left"95 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/player.png,align=left,link=[#point2.9])]]96 }}}97 '''[#point2.9 Player]'''[[br]]98 {{{#!div style="float: left99 Default display when pressing the __Play_ button.100 }}}101 }}}102 |----103 {{{#!td align=center valign=top style="border: none; font-size: 115%"104 {{{#!div style="float: left"105 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/favourite.png,align=left,link=[#point2.10])]]106 }}}107 '''[#point2.10 Favourite]'''[[br]]108 {{{#!div style="float: left109 Default display when pressing the __FAV__ button.110 }}}111 }}}112 {{{#!td align=center valign=top style="border: none; font-size: 115%"113 {{{#!div style="float: left"114 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/record.png,align=left,link=[#point2.11])]]115 }}}116 '''[#point2.11 Record]'''[[br]]117 {{{#!div style="float: left118 Default display when pressing the __REC__ button while watching TV.119 }}}120 }}}121 122 123 }}}124 }}}125 ----126 [[BR]]127 128 129 130 131 132 '''Infobar''' [=#point2.1] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])133 134 [[Image(source:/wiki/Wiki-Pictures/DE/Info-OSD.jpg)]] [[br]]135 This overlay display shows when you press the __"INFO"__ button when viewing a tv channel. [[br]]136 It shows actual and next program information137 138 [[br]]139 '''Playback Infobar''' [=#point2.2] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])140 141 [[Image(source:/wiki/Wiki-Pictures/DE/Playback-OSD.jpg)]] [[br]]142 This overlay shows when you press the __"INFO"__ button when playing back a program or time shift is in operation. [[br]]143 It shows a list of the available buttons to use when in playbac/timeshift to do various things.144 145 [[br]]146 '''Audio Track''' [=#point2.3] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])147 148 [[Image(source:/wiki/Wiki-Pictures/DE/Audio-OSD.jpg)]] [[br]]149 This overlay shows when you press the __"AUDIO""__ button when viewing a tv channel. [[br]]150 It allows you to adjust the audio track on the current stream if an alternative audio source exists.151 152 [[br]]153 '''History''' [=#point2.4] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])154 155 [[Image(source:/wiki/Wiki-Pictures/DE/History-OSD.jpg)]] [[br]]156 This overlay shows when you press the __"RECALL"__ button when viewing a tv channel. [[br]]157 It allows you to recall the past viewed channels for fast zapping between them.158 159 [[br]]160 '''Sleep Timer''' [=#point2.5] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])161 162 [[Image(source:/wiki/Wiki-Pictures/DE/Sleep-OSD.jpg)]] [[br]]163 This overlay shows when you press the __"SLEEP"__ button. [[br]]164 It allows you to set the shutdown timer to automatically shutdown the receiver.165 166 [[br]]167 '''Subtitle''' [=#point2.6] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])168 169 [[Image(source:/wiki/Wiki-Pictures/DE/Subtitle-OSD.jpg)]] [[br]]170 This overlay shows when you press the __"SUBTITLE"__ button. [[br]]171 It allows you to select/enable a subtitle during playback.172 173 [[br]]174 '''EPG''' [=#point2.7] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])175 176 [[Image(source:/wiki/Wiki-Pictures/DE/EPG-OSD.jpg)]] [[br]]177 This overlay shows when you press the __"EPG"__ button. [[br]]178 It shows a list of the program information from here you can setup a timer or search the EPG.179 180 [[br]]181 '''Program Info''' [=#point2.8] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])182 183 [[Image(source:/wiki/Wiki-Pictures/DE/Program-Info-OSD.jpg)]] [[br]]184 This Overlay shows when you press the __"INFO"__ button when in the EPG display. [[br]]185 This shows the current selected program information.186 187 [[br]]188 '''Player''' [=#point2.9] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])189 190 [[Image(source:/wiki/Wiki-Pictures/DE/Internal-Player-OSD.jpg)]] [[br]]191 This overlay shows when you press the __"PLAY"__ button. [[br]]192 It allows you to select a movie or recording to play it also has a basic file manager.193 194 [[br]]195 '''Favourite''' [=#point2.10] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])196 197 [[Image(source:/wiki/Wiki-Pictures/DE/Favourite-OSD.jpg)]] [[br]]198 This overlay shows when you press the __"FAV"__ button. [[br]]199 It allows you to brouse through your favourits lists.200 201 [[br]]202 '''Record''' [=#point2.11] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])203 204 [[Image(source:/wiki/Wiki-Pictures/DE/Record-OSD.jpg)]] [[br]]205 This overlay shows when you press the __"RECORD"__ button. [[br]]206 It allows you to set the record function on the current tv channel.207 208 [[br]] -
wiki/pages/de/Graphic-EPG
r37662 r43267 1 [[TranslatedPages]]2 >----3 >'''3.1.3 Graphischer EPG''' [=#point3.1.3] ([wiki:Interface-Operation#point3.1 Timer und EPG (zurück])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/DE/Graphical_EPG.jpg)]][[BR]]7 >8 Dieser zeigt das Programm mehrerer Sender gleichzeitig anhand eines Zeitstrahls an, [[BR]]9 um einen schnellen Überblick erhalten zu können, was wann wie lange läuft [[BR]]10 und was parallel dazu auf einem anderen Sender läuft.11 12 13 [[br]]14 15 '''Farb- und Extra Tasten Funktionen"16 17 18 ||'''rote Taste: (Timer)''' ||öffnet das Timer Menü um eine programmmierte Aufnahme zu erstellen||19 ||'''grüne Taste: (EPG)''' ||öffnet die ([wiki:EPG-Short-View#point3.10.1 EPG Kurzübersicht])||20 ||'''gelbe Taste: (einfach EPG)''' ||öffnet das ([wiki:Single-EPG#point3.10.2 Einfach EPG])||21 ||'''blaue Taste: (Multi EPG)''' ||öffnet das ([wiki:Multi-EPG#point3.10.3 Multi EPG])22 ||'''Taste 0 (EPG Suche):''' ||ruft die EPG Suchfunktion auf.||23 ||'''FAV Taste: (Favoriten)''' ||öffnet das Favoriten Menü um diese zu wechseln.||24 ||'''Info Taste: (Info)''' ||Zeigt die EPG Informationen zur aktuell ausgewählten Sendung.||25 26 27 Für Informationen wie Sie eine Aufnahme programmieren drücken Sie ([wiki:Records#point3.10.5 Aufnahmen])28 29 Für Informationen wie Sie eine EPG Suche mit der Taste '''0''' machen drücken Sie ([wiki:EPG-Search#point3.10.4 EPG Suche]) -
wiki/pages/de/Hard-Disk
r37662 r43267 1 [[TranslatedPages]]2 >----3 >'''3.5.5 Festplatte''' [=#point3.5.5] ([wiki:Interface-Operation#point3.5 zurück)])4 >5 >6 >7 >[[Image(source:/wiki/Wiki-Pictures/DE/system-Hard_Disk.jpg)]][[BR]]8 >9 Hier wird die Festplatte eingerichtet.[[BR]]10 11 [[br]]12 13 * ([wiki:Format-Hdd#point3.5.5.1 Festplatte formatieren])14 * ([wiki:Filesystem-Check#point3.5.5.2 Dateisystem prüfen])15 * ([wiki:Configure#point3.5.5.3 Festplatte konfigurieren])16 * ([wiki:Time-to-sleep#point3.5.5.4 Zeit bis Standby])17 18 [[BR]] -
wiki/pages/de/History
r37662 r43267 1 [[TranslatedPages]]2 ----3 '''1 TitanNit Info Inhaltsverzeichnis''' [=#point1] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])4 ----5 [[br]]6 This section conatins information on TitanNit and frequently asked questions about it.7 Please choose an item below to find more information.8 9 You may select a skip to a specific setup topic or scroll down to read the complete guide.10 {{{#!div style="width: 1100px; margin: auto"11 {{{#!table style="border: none"12 {{{#!td align=center valign=top style="border: none; font-size: 115%"13 {{{#!div style="float: left"14 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/History/About.png,align=left,link=[#point1.1])]]15 }}}16 '''([#point1.1 Über])'''[[br]]17 {{{#!div style="float: left18 click here to find info about TitanNit19 }}}20 }}}21 {{{#!td align=center valign=top style="border: none; font-size: 115%"22 {{{#!div style="float: left"23 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/History/History.png,align=left,link=[#point1.2])]]24 }}}25 '''([#point1.2 Geschichte])'''[[br]]26 {{{#!div style="float: left27 click here to find info on the beginnings of TitanNit28 }}}29 }}}30 {{{#!td align=center valign=top style="border: none; font-size: 115%"31 {{{#!div style="float: left"32 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/History/Features.png,align=left,link=[#point1.3])]]33 }}}34 '''([#point1.3 Funktionsumfang])'''[[br]]35 {{{#!div style="float: left36 click here to find info on the various features of TitanNit37 }}}38 }}}39 }}}40 }}}41 42 {{{#!div style="width: 1100px; margin: auto"43 {{{#!table style="border: none"44 {{{#!td align=center valign=top style="border: none; font-size: 115%"45 {{{#!div style="float: left"46 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/History/Frequnetly_Asked_Questions.png,align=left,link=[#point1.4])]]47 }}}48 '''([#point1.4 Frequently Asked Questions])'''[[br]]49 {{{#!div style="float: left50 Apendixcies/ references [[br]]to other setup related topics.51 }}}52 }}}53 }}}54 }}}55 [[br]]56 [[br]]57 58 ----59 '''1 Über''' [=#point1.1] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])60 ----61 TitanNit ist ein Betriebssystem für einige Kathrein und Atemio/Atevio Digital Satelliten Receiver. [[br]]62 [[br]]63 [[br]]64 65 ----66 '''1.1 Geschichte''' [=#point1.2]([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])67 ----68 * Angefangen hat es im April 2011. Unser Developer Nit hat still und heimlich drei Wochen lang am Grundstein für Titan gearbeitet. Nach der Vorstellung ist Obi mit an Bord gekommen und der Rest vom Team auch. Alle waren begeistert wie schnell so etwas entstehen kann.69 * Die Entwicklung war von Anfang an nonpublic Source, es war noch nicht klar in welche Richtung es gehen würde.70 * nach einer 6 monatigen Entwicklungszeit wurde unser Hardware Unterstützer Atemio auf dieses Projekt aufmerksam und hat Interesse gemeldet. Durch die jahrelange Enigma2 Zusammenarbeit hatte sie dadurch den Vorrang bekommen.71 * im Dezember 2011 wurde dann eine halbjährige Vereinbarung mit dem Hersteller Atemio getroffen.72 * nach der guten Zusammenarbeit wurde diese Vereinbarung dann bis jetzt verlängert.73 * die Grundidee für diese Projekt entstand aus mehreren Gründen:74 * die sh4 Receiver hatten schon immer durch den fehlenden Python Chip und fehlender Cpu Leistung immer ihre Probleme mit Enigma275 * ständige Enigma2 Anpassungsvorgänge im TDT Git waren sehr umfangreich und haben viel Zeit gekostet76 * als andere Gui Alternative gab es noch Neutrino, diese Oberfläche hatte zu dieser Zeit keinen Twinsupport77 * statt diese dort einzubauen hat Nit für sich beschlossen, eine komplett neue Gui zu erstellen, die beide Gui Vorteile vereint.78 * Neutrinos Vorteil war eh und je die Geschwindigkeit79 * Enigma2s Vorteil war die einfache Einbindung von Skins und den Erweiterungen80 * diese beiden in Verbindung ist der Grundgedanke von Titan gewesen und wurde in sehr kurzer und zeitintensiver Entwicklungsphase realisiert.81 82 ----83 '''1.2 Funktionsumfang''' [=#point1.3] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])84 ----85 [[br]]86 '' Highlights von TitanNit ''87 88 - Leistungsstarkes Linux Betriebsystem89 - Schneller Systemstart90 - ca. 1 Sekunde aus dem Standby-Modus91 - ca. 25 Sekunden aus dem Deep-Standby-Modus92 - Schnelle Umschaltzeiten (unter 1 Sekunde)93 - Verschiedene Menüoberflächen (Skins) inkl. Anpassungsmöglichkeiten94 - Viele Einstellungsmöglichkeiten um das System auf die eigenen Bedürfnisse anzupassen95 - Backup / Restore Funktion96 - Übersichtliche Kanalliste mit Favoriten und anzeige der nachfolgenden Sendungen97 - Multi-Tuner98 - Plugin-Verwaltung99 - Unterstützung von vielen Medienformaten100 - Große Auswahl an Plugins101 - PC Programme zum konvertieren und ändern der Senderliste102 - Bildschirmschoner im Radio Modus103 - Fernbedienungstasten frei belegbar104 - Onlineupdate der Firmware105 - Geringer Speicherverbrauch106 - 24h Forum-Support107 - Wachsende Community108 - Webinterface109 - Android App "tiMote"110 - Windows App "tiView"111 - Bouquets Editor "SatchannelListEditor"112 113 [[br]]114 115 116 117 ----118 '''Frequently Asked Questions''' [=#point1.4] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])119 ----120 [[br]]121 122 '''What is Titan?'''[[br]]TitanNit is a semi closed source replacement operating system for kathrein and Atemio/Atevio digital set top receivers designed to completly replace the factory software.123 [[br]]124 125 '''What can Titan do?'''[[br]]Titan was primarally designed to play/view and record live tv services from tresterial, cable and satellite, it can also be used to play/view the most popular video, audio, and picture formats, and many more lesser-known formats, including:126 Video - DVD-Video, VCD/SVCD, MPEG-1/2/4, DivX, XviD, Matroska127 Audio - MP3, AAC.128 Picture - JPG, GIF, PNG.129 130 131 These can all be played directly from the hard-drive or from a computer over a local network (LAN) internet IPTV services and media streams hosted by the [[wiki:Plugins-Player#point10.11 TiThek]] plugin.132 133 TitanNit can play DVD-Video movies (with and without menus) from ISO/IMG images and even ZIP/RAR-archives with the use of the [[wiki:Plugins-Player#point10.11 dvd-player plugin]].134 TitanNit has a simple user interface that's pleasant and easy to use.135 136 All these features enable your device to function as a full multimedia entertainment system for your tv for the whole family to enjoy.137 [[br]]138 [[br]]139 140 '''What features does TitanNit have?'''[[br]]See the complete list of supported features in the [[wiki:Versions#point6 software versions changelog]] for information of the offically supported features.141 [[br]]142 [[br]]143 144 '''Where can I suggest/request a new feature or function to be implemented into TitanNit?'''[[br]]You can log a NEW feature/function request in our tracker. Just make sure that you first remember to search for existing "Feature Requests" before logging a new request/ticket! (see [wiki:Troubleshooting#point12.1 12.1 Bug Reporting] for information on submitting a ticket).145 146 You may also post a copy of your suggestion in the feature-suggestion section of our [http://www.aaf-digital.info/forum/forum.php AAF Digital Forum] if you want it open for discussion,147 Please respect that your request only counts as a suggestion, there' s no guarantee that it will implemented soon or ever.148 149 Almost all users think their own ideas is the most important, and a very common comment is: "if you only add these features then TitanNit will be perfect for me".150 151 You could try bribing the devs with elaborate gifts :-) flattery will get you every where and agorant requests will most likely get your posts deleted or get you banned from the forum please follow the rules of the forum [http://www.aaf-digital.info/ here].152 [[br]]153 [[br]]154 155 '''When will this and that feature or function be supported by TitanNit?'''[[br]]TitanNit development is driven by the tasks that are important to the individual developers and to the hardware sponsors Atemio, if you have a funky idea or feature you wish implemented submit a request ticket (see [wiki:Troubleshooting#point12.1 12.1 Bug Reporting], but make an extensive search of the forum and tickets before requesting it as it has probally been sugested before.156 [[br]]157 [[br]]158 159 '''Is TitanNit, or the AAFTeam affiliated with Fortis, katherin or ..... or the hardware manufacturer of my Reciever?'''[[br]]No, TitanNit and its members are not in any way affiliated with the manufactures in any way. TitanNit is a third party operating system designed to replace the manufactures original operating system.160 [[br]]161 [[br]]162 163 '''Will the instalation of Titan Void my Warranty?'''[[br]]Yes probally but this software is tested to ensure it won't dammage your reciever and can be reverted at any time to a factory condition. please see [wiki:Supported-Receivers#point7 Supported Receivers] for a list of suspected supported receivers, If you have successfully installed TitanNit on your Receiver please inform an admin member so this list can be updated and verified.164 165 If the factory software was so feature packed and bugless there would be no need for software like TitanNit but sadly this is a world where software is driven by sales and purchases by the big players who request features, but TitanNit is a little different it was started just because the users/ devs wanted something better than what was handed to them by the manufacturer.166 [[br]]167 [[br]]168 169 '''Why is TitanNit Not available for my receiver model XXX?'''[[br]]TitanNit is funded by Atemio who supplys hardware to the devs in return for developing software for use on these devices.170 In future TitanNit may be available for your receiver as support in increaced, at this time Titan in in development for the Broadcom Mips Archeture for the upcomming release of the Atemio 5200 which will be the first non SH4 based reciever supported by TitanNit.171 [[br]]172 [[br]]173 174 '''How do I ...'''[[br]] I don't know I suggest you read the [wiki:Quick-Start-Guide#point0 Quick Start Guide], manual, check the rest of the wiki or proform a [http://www.aaf-digital.info/forum/search.php?search_type=1 search] on the forum, as it has most likely been asked before and you will find the answer, as a last resort post a question on the [http://www.aaf-digital.info/forum/forum.php AAF Digital Forum].175 [[br]]176 [[br]]177 178 '''Where should I put videos/music and pictures so that Titan can read it?''' [[br]]Anywhere you like. TitanNit can read off the local harddisk,usb sticks, or from network sources. Simply press "Add a Source" using the network Browser and browse away.179 >[[Image(source:/wiki/Wiki-Pictures/DE/Network-Browser.jpg, 25%)]][[br]]180 [[br]]181 [[br]]182 183 '''What is the default username and password to the built-in FTP server and telnet server?'''Both the default password and the user name is “root” (in lower case) as with many linux instalations.184 [[br]]185 [[br]]186 187 '''Can I watch recordings from my decoder when on holiday?'''[[br]]yes you can you will need to set up either a static ip on your home network or set up a dynadns server, from there you can log onto the web interface and use video lan to watch tv or your recordings.188 [[br]]189 [[br]]190 191 '''Can I thank and or Chat the TitanNit team?''[[br]]Yes sure you can jump on the [[http://www.aaf-digital.info/forum/ AAFforum]] and leave a post and or stop by [wiki:Contact#point15 Skype] and request a invite the majority of us speak german, some of us speak english also.192 193 '''Do you accept donations?'''[[br]] the team is currently fully funded and no donations are nesessary but if you have some device that may be of use with titan feel free to contact us.194 195 '''How come the Wiki does not show how to operate feature or function.....?'''[[br]]Titan Is in development and is updated almost daily some features plugins or informations have yet to be merged in, this forum is open to editing by the community feel free to log in and add said feature's informatation to the wiki.196 [[br]]197 [[br]]198 199 ([#point1 Top of Page])200 201 202 203 -
wiki/pages/de/Installation-Recovery
r37662 r43267 1 [[TranslatedPages]]2 ----3 '''8 Installation / Recovery Inhaltsverzeichnis''' [=#point8] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])4 5 ----6 7 This section contains information on installation and removal of TitanNit from your receiver8 {{{#!div style="width: 1100px; margin: auto"9 {{{#!table style="border: none"10 {{{#!td align=center valign=top style="border: none; font-size: 115%"11 {{{#!div style="float: left"12 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Atemio.png, 60px,align=left,link=http://www.atemio.de Atemio homepage)]]13 }}}14 '''SH4 Atemio'''[[br]]15 {{{#!div style="float: left16 [http://www.atemio.de Atemio homepage]17 * [#point8.001 8.001 Atemio510]18 * [#point8.002 8.002 Atemio520]19 * [#point8.003 8.003 Atemio530]20 * [#point8.004 8.004 Atemio7600]21 * [#point8.005 8.005 Atemio700]22 * [#point8.006 8.006 Atemio7000]23 }}}24 }}}25 {{{#!td align=center valign=top style="border: none; font-size: 115%"26 {{{#!div style="float: left"27 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Fortis.png, 60px,align=left,link=http://www.fortis.co.kr Fortis homepage)]]28 }}}29 '''SH4 Fortis'''[[br]]30 {{{#!div style="float: left31 [http://www.fortis.co.kr Fortis homepage]32 * [#point8.011 8.011 Fortis Clone]33 * [#point8.012 8.012 Bootloader Installation]34 * [#point8.013 8.013 Fortis FS-9000]35 * [#point8.014 8.014 Fortis FS-9200]36 * [#point8.015 8.015 Fortis HS-9510]37 * [#point8.016 8.016 Fortis HX-8200]38 * [#point8.017 8.017 Fortis HS-7810]39 }}}40 }}}41 {{{#!td align=center valign=top style="border: none; font-size: 115%"42 {{{#!div style="float: left"43 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/homecast.png, 60px,align=left,link=http://www.myhomecast.nl Homecast homepage)]]44 }}}45 '''SH4 Homecast'''[[br]]46 {{{#!div style="float: left47 [http://www.myhomecast.nl Homecast homepage]48 * [#point8.021 8.021 Homecast Pro]49 }}}50 }}}51 |----52 {{{#!td align=center valign=top style="border: none; font-size: 115%"53 {{{#!div style="float: left"54 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/IPBox.png, 60px,align=left,link=http://www.abipbox.com/ AB IPBox homepage)]]55 }}}56 '''SH4 IPBox'''[[br]]57 {{{#!div style="float: left58 [http://www.abipbox.com/ AB IPBox homepage]59 * [#point8.031 8.031 Ipbox91]60 * [#point8.032 8.032 Ipbox900]61 * [#point8.033 8.033 Ipbox910]62 * [#point8.034 8.034 Ipbox9000]63 }}}64 }}}65 {{{#!td align=center valign=top style="border: none; font-size: 115%"66 {{{#!div style="float: left"67 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/kathrein.png, 60px,align=left,link=http://www.kathrein-gmbh.at kathrein homepage)]]68 }}}69 '''SH4 Kathrein'''[[br]]70 {{{#!div style="float: left71 [http://www.kathrein-gmbh.at kathrein homepage]72 * [#point8.041 8.041 Ufs910]73 * [#point8.042 8.042 Ufs912]74 * [#point8.043 8.043 Ufs913]75 * [#point8.044 8.044 Ufs922]76 * [#point8.045 8.045 Ufc960]77 }}}78 }}}79 {{{#!td align=center valign=top style="border: none; font-size: 115%"80 {{{#!div style="float: left"81 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Spark.png, 60px,align=left,link=http://www.spark-tv.com Spark homepage)]]82 }}}83 '''SH4 Spark'''[[br]]84 {{{#!div style="float: left85 [http://www.spark-tv.com Spark homepage]86 * [#point8.051 8.051 Spark7111]87 * [#point8.052 8.052 Spark7162]88 }}}89 }}}90 |----91 {{{#!td align=center valign=top style="border: none; font-size: 115%"92 {{{#!div style="float: left"93 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Atemio.png, 60px,align=left,link=http://www.atemio.de Atemio homepage)]]94 }}}95 '''Mips Atemio'''[[br]]96 {{{#!div style="float: left97 [http://www.atemio.de Atemio homepage]98 * [#point8.061 8.061 Atemio5000 AKA Nemesis]99 * [#point8.062 8.062 Atemio5200]100 * [#point8.063 8.063 Atemio6000]101 * [#point8.064 8.064 Atemio6100]102 * [#point8.065 8.065 Atemio6200]103 }}}104 }}}105 {{{#!td align=center valign=top style="border: none; font-size: 115%"106 {{{#!div style="float: left"107 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/beyonwiz.png, 60px,align=left,link=http://www.beyonwiz.com.au Beyonwiz homepage)]]108 }}}109 '''Mips Beyonwiz'''[[br]]110 {{{#!div style="float: left111 [http://www.beyonwiz.com.au Beyonwiz homepage]112 * [#point8.071 8.071 BeyonwizT4]113 }}}114 }}}115 {{{#!td align=center valign=top style="border: none; font-size: 115%"116 {{{#!div style="float: left"117 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Goldern_Interstar.png, 60px,align=left,link=http://www.golden-interstar.pl Golden Interstar homepage)]]118 }}}119 '''Mips Golden Interstar'''[[br]]120 {{{#!div style="float: left121 [http://www.golden-interstar.pl Golden Interstar homepage]122 * [#point8.081 8.081 Xpeedlx1/2]123 * [#point8.082 8.082 Xpeedlx3]124 }}}125 }}}126 |----127 {{{#!td align=center valign=top style="border: none; font-size: 115%"128 {{{#!div style="float: left"129 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Miraclebox.png, 60px,align=left,link=http://www.miraclebox.se miraclebox homepage)]]130 }}}131 '''Mips Miraclebox[[br]]132 {{{#!div style="float: left133 [http://www.miraclebox.se Miraclebox homepage]134 * [#point8.091 8.091 MBUltra]135 * [#point8.092 8.092 MBMini]136 }}}137 }}}138 {{{#!td align=center valign=top style="border: none; font-size: 115%"139 {{{#!div style="float: left"140 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Sezam.png, 60px,align=left,link=http://www.sezam-club.ru/ homepage)]]141 }}}142 '''Mips Sezam'''[[br]]143 {{{#!div style="float: left144 [http://www.sezam-club.ru/ homepage]145 * [#point8.101 8.101 Sezam-Marvel]146 * [#point8.102 8.102 Sezam-1000HD]147 }}}148 }}}149 }}}150 }}}151 152 153 154 '''SH4 Models'''155 ----156 '''8.1 Atemio510 and Fortis HS-7810''' [=#point8.001] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])157 ----158 '' Wie installiere ich ein Atemio 510 IRD Image? ''159 * Besuchen Sie die Atemio Homepage oder das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.33 IRD Download Locations])160 * Entpacken Sie die ZIP-Datei161 * Kopieren Sie nun die entpackte IRD-Firmware-Datei auf einen in FAT32 formatierten USB-Stick.162 Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.163 Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.164 * USB Stick mit der IRD-Datei anschließen165 * Gerät einschalten (Netzstecker anschließen) und gleichzeitig die die CH+ am Gerät (1 Taste von rechts) solange gedrückt halten (ca. 15 Sekunden), bis „search IRD File…“ erscheint,166 anschließend beginnt die Installation. Erst danach die Taste loslassen167 Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.168 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen169 170 [[br]]171 '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]172 * [http://sbnc.dyndns.tv/trac/wiki/de/Remote-Device-Control#point4.6 iboot sh4 flashen and recovery ][[br]]173 174 [#point8 Top of Page]175 [[br]]176 ----177 '''8.2 Atemio520''' [=#point8.002] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])178 ----179 '' Wie installiere ich ein Atemio 520 IRD Image? ''180 * Besuchen Sie die Atemio Homepage oder das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.33 IRD Download Locations])181 * Entpacken Sie die ZIP-Datei182 * Kopieren Sie nun die entpackte IRD-Firmware-Datei auf einen in FAT32 formatierten USB-Stick.183 Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.184 Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.185 * Schalten Sie das Gerät aus.186 * USB Stick mit der IRD-Datei anschließen187 * Gerät einschalten (Netzstecker anschließen) und gleichzeitig die Power Taste vorne am Gerät (die Taste in der Mitte) solange gedrückt halten (ca. 15 Sekunden), bis „search IRD File…“ erscheint,188 anschließend beginnt die Installation. Erst danach die Taste loslassen189 Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.190 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen191 [[br]]192 '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]193 * [http://sbnc.dyndns.tv/trac/wiki/de/Remote-Device-Control#point4.6 iboot sh4 flashen and recovery ][[br]]194 195 [[br]]196 [#point8 Top of Page]197 [[br]]198 ----199 '''8.3 Atemio530''' [=#point8.003] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])200 ----201 '' Wie installiere ich ein Atemio 530 IRD Image? ''202 * Besuchen Sie die Atemio Homepage oder das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.33 IRD Download Locations])203 * Entpacken Sie die ZIP-Datei204 * Kopieren Sie nun die entpackte IRD-Firmware-Datei auf einen in FAT32 formatierten USB-Stick.205 Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.206 Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.207 * Schalten Sie das Gerät aus.208 * USB Stick mit der IRD-Datei anschließen209 * Gerät einschalten (Netzstecker anschließen) und gleichzeitig die CH+ am Gerät (1 Taste von rechts) solange gedrückt halten (ca. 15 Sekunden), bis „search IRD File…“ erscheint,210 anschließend beginnt die Installation. Erst danach die Taste loslassen211 Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.212 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen213 214 [[br]]215 [#point8 Top of Page]216 [[br]]217 ----218 '''8.4 Atemio7600 and Fortis HX-8200''' [=#point8.004] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])219 ----220 '' Wie installiere ich ein Atemio 7600 IRD Image? ''221 * Besuchen Sie die Atemio Homepage oder das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.15 IRD Download Locations])222 * Entpacken Sie die ZIP-Datei223 * Kopieren Sie nun die entpackte IRD-Firmware-Datei auf einen in FAT32 formatierten USB-Stick.224 Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.225 Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.226 * Schalten Sie das Gerät aus.227 * USB Stick mit der IRD-Datei anschließen228 * Gerät einschalten (Netzstecker anschließen) und gleichzeitig die CH+ am Gerät (1 Taste von rechts) solange gedrückt halten (ca. 15 Sekunden), bis „search IRD File…“ erscheint,229 anschließend beginnt die Installation. Erst danach die Taste loslassen230 Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.231 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen232 [[br]]233 '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]234 * [http://sbnc.dyndns.tv/trac/wiki/de/Remote-Device-Control#point4.6 iboot sh4 flashen and recovery ][[br]]235 236 [[br]]237 [#point8 Top of Page]238 [[br]]239 ----240 '''8.5 Atevio700''' [=#point8.005] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])241 ----242 '' Wie installiere ich ein Atevio 700 IRD Image? ''243 * Besuchen Sie die Atemio Homepage oder das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.33 IRD Download Locations])244 * Entpacken Sie die ZIP-Datei245 * Kopieren Sie nun die entpackte IRD-Firmware-Datei auf einen in FAT32 formatierten USB-Stick.246 Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.247 Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.248 * Schalten Sie das Gerät aus.249 * USB Stick mit der IRD-Datei anschließen250 * Gerät einschalten (Netzstecker anschließen) und gleichzeitig die die CH+ am Gerät (1 Taste von rechts) solange gedrückt halten (ca. 15 Sekunden), bis „search IRD File…“ erscheint,251 anschließend beginnt die Installation. Erst danach die Taste loslassen252 Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.253 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen254 [[br]]255 '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]256 * [http://sbnc.dyndns.tv/trac/wiki/de/Remote-Device-Control#point4.6 iboot sh4 flashen and recovery ][[br]]257 258 [#point8 Top of Page]259 [[br]]260 ----261 '''8.6 Atevio7000 and Fortis FS-9000/9200''' [=#point8.006] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])262 ----263 '' Wie installiere ich ein Atevio 7000 IRD Image? ''264 * Besuchen Sie die Atemio Homepage oder das AAF Digital Forum und laden Sie sich aktuellest TitanNit Firmware. ([#point8.33 Download Locations])265 * Entpacken Sie die ZIP-Datei266 * Kopieren Sie nun die entpackte IRD-Firmware-Datei auf einen in FAT32 formatierten USB-Stick.267 Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.268 Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.269 * Schalten Sie das Gerät aus.270 * USB Stick mit der IRD-Datei anschließen271 * Gerät einschalten (Netzstecker anschließen) und gleichzeitig die CH+ am Gerät (1 Taste von rechts) solange gedrückt halten (ca. 15 Sekunden), bis „search IRD File…“ erscheint,272 anschließend beginnt die Installation. Erst danach die Taste loslassen273 Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.274 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen275 [[br]]276 '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]277 * [http://sbnc.dyndns.tv/trac/wiki/de/Remote-Device-Control#point4.6 iboot sh4 flashen and recovery ][[br]]278 [#point8 Top of Page]279 [[br]]280 ----281 '''SH4 Fortis based clone receiver detection (hardware profile)'''[=#point8.011] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])282 ----283 284 As it is virtually impossible to list every fortis clone box on this wiki and data would be repeated over and over again it is broken up into harware revisions to compair that to the atevio model of that box.285 This list will help you select the correct image and bootloader for your clone reciever below is a specifications list check the back of your manual included with your receiver and look at the table below to select the correct hardware model.286 See here for a full list of known Fortis ([wiki:Wiki#Supported-Receivers#point7 Clone Supported Recievers])287 288 {{{#!div style="width: 1000px; margin: auto"289 ||'''Model System'''||'''Tuner'''||'''CPU'''||'''RAM'''||'''ROM (Flash)'''||'''USB'''||'''PVR Funktion'''||'''CardReader'''||'''Common interface'''||'''Display'''||'''Width'''||'''features'''||290 ||[#point8.6 Fortis FS-9000 HD PVR]||DVB-S/S2 2||STI_7101 266 Mhz||192MB||32MB||2||Internal 2.5 or 3.5 SATA, external via USB||1 (*2)||2||12-digit 5x7matrix||43 cm|| ||291 ||[#point8.6 Fortis FS-9200 HD PVR]||DVB-S/S2 2||STI_7101 266 Mhz||192MB||32MB||2||eSATA & USB||1 (*2)||2||12-digit 5x7matrix||34 cm|| ||292 ||[#point8.5 Fortis HS-9510]||DVB-S/S2 1||STI_7101 266 Mhz||192MB||32MB||1||USB||1 (*2)||2||8-digit 14segment||34 cm|| ||293 ||[#point8.4 Fortis HX-8200 HD PVR]||DVB-S/S2, DVB-T2, DVB-C 1/2||STI_7105 450 Mhz||256MB||64MB||3||Internal 2,5´´SATA-HDD external via eSATA + USB||2||2||12-digit 5x7matrix||34 cm||Plug&Play Tuner, Youtube, Browser, FreeTV+||294 ||[#point8.1 Fortis HS-7810 HD PVR]||DVB-S/S2 1||STI_7110 450 Mhz||256MB||32MB||2||USB||1||2||4-digit 7segment||26 cm||YouTube, Browser, FreeTV+||295 }}}296 297 '''NOTE:'''[[BR]]298 * The Fortis HS-7810 is a clone of the Atemio510/520 Models[[BR]]299 * The Fortis HX-8200 is a clone of the Atemio7600 Model[[BR]]300 * The Fortis HS-9510 is a clone of the Atemio700 clone Model[[BR]]301 * The Fortis FS-9000/Fortis FS-9200 is a clone of the Atemio7000 Models302 303 304 '''Aditional Info'''305 306 * [#point8.012 8.012 Bootloader Installation] (required for a fortis/clone reciever to accept atemio software)307 * [#point8.111 8.111 Uninstallation On other Fortis Receivers]308 * [#point8.112 8.112 Update TitanNit]309 * [#point8.113 8.113 IRD Download Location]310 [[br]]311 [#point8 Top of Page]312 [[br]]313 ----314 '''8.021 Homecast''' [=#point8.021] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])315 ----316 '' How do I install an Homecast UPDATEUSB Image? ''317 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])318 * Extract the zip file319 * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.320 Note: The USB stick should not be formatted with windows. Use a separate program, such as the321 " HP USB Disk Storage Format Tool" (freeware program).322 Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.323 * Turn off the Receiver and disconnect all USB devices.324 * Connect the USB stick with the IMG file to your Receiver325 * Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,326 then the installation starts. Only then release the button327 Note: If installation does not start, use a different USB stick.328 * The installation is finished when DONE appears on the receiver.329 * Restart the machine after by the main switch again to .330 [[br]]331 [#point8 Top of Page]332 [[br]]333 ----334 '''8.031 Ipbox91''' [=#point8.031] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])335 ----336 '' Wie installiere ich ein Ipbox 91 UPDATEUSB Image? ''337 * Besuchen Sie die AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.33 IRD Download Locations])338 * Entpacken Sie die ZIP-Datei339 * Kopieren Sie nun die entpackte IMG-Firmware-Datei auf einen in FAT32 formatierten USB-Stick.340 Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.341 Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.342 * Schalten Sie das Gerät aus.343 * USB Stick mit der IMG-Datei anschließen344 * Gerät einschalten (Netzstecker anschließen) und gleichzeitig die Power Taste am Gerät (1 Taste von links) solange gedrückt halten (ca. 3 Sekunden), bis „LOAD SW“ erscheint,345 anschließend beginnt die Installation. Erst danach die Taste loslassen346 Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.347 * Die Installation ist beended wenn DONE am Receiver erscheint.348 * Starten Sie das Gerät danach am Hauptschalter neu.349 [[br]]350 [#point8 Top of Page]351 [[br]]352 ----353 '''8.032 Ipbox900''' [=#point8.032] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])354 ----355 '' Wie installiere ich ein Ipbox 900 UPDATEUSB Image? ''356 * Besuchen Sie die AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.33 IRD Download Locations])357 * Entpacken Sie die ZIP-Datei358 * Kopieren Sie nun die entpackte IMG-Firmware-Datei auf einen in FAT32 formatierten USB-Stick.359 Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.360 Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.361 * Schalten Sie das Gerät aus.362 * USB Stick mit der IMG-Datei anschließen363 * Gerät einschalten (Netzstecker anschließen) und gleichzeitig die Power Taste am Gerät (1 Taste von links) solange gedrückt halten (ca. 3 Sekunden), bis „LOAD SW“ erscheint,364 anschließend beginnt die Installation. Erst danach die Taste loslassen365 Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.366 * Die Installation ist beended wenn DONE am Receiver erscheint.367 * Starten Sie das Gerät danach am Hauptschalter neu.368 [[br]]369 [#point8 Top of Page]370 [[br]]371 ----372 '''8.033 Ipbox910''' [=#point8.033] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])373 ----374 '' Wie installiere ich ein Ipbox 910 UPDATEUSB Image? ''375 * Besuchen Sie die AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.33 IRD Download Locations])376 * Entpacken Sie die ZIP-Datei377 * Kopieren Sie nun die entpackte IMG-Firmware-Datei auf einen in FAT32 formatierten USB-Stick.378 Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.379 Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.380 * Schalten Sie das Gerät aus.381 * USB Stick mit der IMG-Datei anschließen382 * Gerät einschalten (Netzstecker anschließen) und gleichzeitig die Power Taste am Gerät (1 Taste von links) solange gedrückt halten (ca. 3 Sekunden), bis „LOAD SW“ erscheint,383 anschließend beginnt die Installation. Erst danach die Taste loslassen384 Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.385 * Die Installation ist beended wenn DONE am Receiver erscheint.386 * Starten Sie das Gerät danach am Hauptschalter neu.387 [[br]]388 [#point8 Top of Page]389 [[br]]390 ----391 '''8.034 Ipbox9000''' [=#point8.034] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])392 ----393 '' Wie installiere ich ein Ipbox 9000 UPDATEUSB Image? ''394 * Besuchen Sie die AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.33 IRD Download Locations])395 * Entpacken Sie die ZIP-Datei396 * Kopieren Sie nun die entpackte IMG-Firmware-Datei auf einen in FAT32 formatierten USB-Stick.397 Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.398 Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.399 * Schalten Sie das Gerät aus.400 * USB Stick mit der IMG-Datei anschließen401 * Gerät einschalten (Netzstecker anschließen) und gleichzeitig die Power Taste am Gerät (1 Taste von links) solange gedrückt halten (ca. 3 Sekunden), bis „LOAD SW“ erscheint,402 anschließend beginnt die Installation. Erst danach die Taste loslassen403 Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.404 * Die Installation ist beended wenn DONE am Receiver erscheint.405 * Starten Sie das Gerät danach am Hauptschalter neu.406 [[br]]407 [#point8 Top of Page]408 [[br]]409 ----410 '''8.041 Kathrein Ufs910''' [=#point8.041] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])411 ----412 '' Wie installiere ich ein Kathrein UFS910 Update Image? ''413 * Beim Installieren per usb wird der MNT Bereich im Image gelöscht das ist gleichzusetzen wie ein (Recovery-Image), beim Onlineupdate bleibt der Bereich erhalten.414 * Besuchen Sie die das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.33 IRD Download Locations])415 * Entpacken Sie die ZIP-Datei.416 * Kopieren Sie nun die entpackte Update-Firmware-Datei auf einen in FAT32 formatierten USB-Stick und nennen Sie in miniFLASH.img um.417 Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.418 Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.419 * Schalten Sie das Gerät aus.420 * USB Stick mit der Update-Datei anschließen421 * Gerät einschalten (Netzstecker anschließen) und gleichzeitig mit der Fernbedinung 5 sekunden auf die Record Taste drücken bis „miniFlash search“ erscheint,422 anschließend beginnt die Installation. Erst danach die Taste loslassen423 Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.424 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen425 [[br]]426 [#point8 Top of Page]427 [[br]]428 ----429 '''8.042 Kathrein UFS912''' [=#point8.042] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])430 ----431 '' Wie installiere ich ein Kathrein UFS912 Update Image? ''432 * Besuchen Sie die das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.33 IRD Download Locations])433 * Entpacken Sie die ZIP-Datei.434 * Kopieren Sie nun die entpackte Update-Firmware-Datei auf einen in FAT32 formatierten USB-Stick und platzieren sie die Datei im /kathrein/ufs912 Ordner435 Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.436 Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.437 * Schalten Sie das Gerät aus.438 * USB Stick mit der Update-Datei anschließen439 * Gerät einschalten (Netzstecker anschließen) und gleichzeitig die Radio-Taste am Gerät solange gedrückt halten (ca. 5 Sekunden), bis „emergency boot“ erscheint,440 anschließend beginnt die Installation. Erst danach die Taste loslassen441 Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.442 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen443 [[br]]444 [#point8.1 Top of Page]445 [[br]]446 ----447 '''8.043 Kathrein UFS913''' [=#point8.043] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])448 ----449 '' Wie installiere ich ein Kathrein UFS913 Update Image? ''450 * Besuchen Sie die das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.33 IRD Download Locations])451 * Entpacken Sie die ZIP-Datei.452 * Kopieren Sie nun die entpackte Update-Firmware-Datei auf einen in FAT32 formatierten USB-Stick und platzieren sie die Datei im /kathrein/ufs913 Ordner453 Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.454 Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.455 * Schalten Sie das Gerät aus.456 * USB Stick mit der Update-Datei anschließen457 * Gerät einschalten (Netzstecker anschließen) und gleichzeitig die Radio-Taste am Gerät solange gedrückt halten (ca. 5 Sekunden), bis „emergency boot“ erscheint,458 anschließend beginnt die Installation. Erst danach die Taste loslassen459 Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.460 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen461 462 [[br]]463 [#point8.1 Top of Page]464 [[br]]465 ----466 '''8.044 Kathrein UFS922''' [=#point8.044] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])467 ----468 '' Wie installiere ich ein Kathrein UFS922 Update Image? ''469 * Beim Installieren per usb wird der MNT Bereich im Image gelöscht das ist gleichzusetzen wie ein (Recovery-Image), beim Onlineupdate bleibt der Bereich erhalten.470 * Besuchen Sie die das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.33 IRD Download Locations])471 * Entpacken Sie die ZIP-Datei.472 * Kopieren Sie nun die entpackte Update-Firmware-Datei auf einen in FAT32 formatierten USB-Stick und platzieren sie die Datei im /kathrein/ufs922 Ordner473 Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.474 Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.475 * Schalten Sie das Gerät aus.476 * USB Stick mit der Update-Datei anschließen477 * Gerät einschalten (Netzstecker anschließen) und gleichzeitig die Radio-Taste am Gerät solange gedrückt halten (ca. 5 Sekunden), bis „emergency boot“ erscheint,478 anschließend beginnt die Installation. Erst danach die Taste loslassen479 Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.480 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen481 [[br]]482 [#point8 Top of Page]483 [[br]]484 ----485 '''8.045 Kathrein UFC960''' [=#point8.045] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])486 ----487 '' Wie installiere ich ein Kathrein UFC960 Update Image? ''488 * Beim Installieren per usb wird der MNT Bereich im Image gelöscht das ist gleichzusetzen wie ein (Recovery-Image), beim Onlineupdate bleibt der Bereich erhalten.489 * Besuchen Sie die das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.33 IRD Download Locations])490 * Entpacken Sie die ZIP-Datei.491 * Kopieren Sie nun die entpackte Update-Firmware-Datei auf einen in FAT32 formatierten USB-Stick und platzieren sie die Datei im /kathrein/ufc960 Ordner492 Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.493 Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.494 * Schalten Sie das Gerät aus.495 * USB Stick mit der Update-Datei anschließen496 * Gerät einschalten (Netzstecker anschließen) und gleichzeitig die Radio-Taste am Gerät solange gedrückt halten (ca. 5 Sekunden), bis „emergency boot“ erscheint,497 anschließend beginnt die Installation. Erst danach die Taste loslassen498 Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.499 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen500 [[br]]501 [#point8 Top of Page]502 [[br]]503 ----504 '''8.051 SPARK (7111)''' [=#point8.051] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])505 ----506 '' Wie installiere ich ein Spark (7111) Update Image? ''507 * Besuchen Sie die das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.33 IRD Download Locations])508 * Entpacken Sie die ZIP-Datei.509 * Kopieren Sie nun die entpackte Update-Firmware-Datei auf einen in FAT32 formatierten USB-Stick und platzieren sie die Dateien e2jffs2.img und uImage im /enigma2 Ordner510 Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.511 Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.512 * Schalten Sie das Gerät aus.513 * USB Stick mit der Update-Datei anschließen514 * Gerät einschalten (Netzstecker anschließen) und gleichzeitig die Ok-Taste am Gerät solange gedrückt halten (ca. 5 Sekunden), bis „Forc“ erscheint,515 anschließend beginnt die Installation es erscheint "U LD" im Vfd. Erst danach die Taste loslassen516 Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.517 * Nach der Installation es erscheint "SUCC" im Vfd bootet der Receiver neu und das Sendebild sollte erscheinen518 [[br]]519 [#point8 Top of Page]520 [[br]]521 ----522 '''8.052 SPARK7162''' [=#point8.052] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])523 ----524 '' Wie installiere ich ein Spark 7111 Update Image? ''525 * Besuchen Sie die das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.33 IRD Download Locations])526 * Entpacken Sie die ZIP-Datei.527 * Kopieren Sie nun die entpackte Update-Firmware-Datei auf einen in FAT32 formatierten USB-Stick und platzieren sie die Dateien e2jffs2.img und uImage im /enigma2 Ordner528 Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.529 Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.530 * Schalten Sie das Gerät aus.531 * USB Stick mit der Update-Datei anschließen532 * Gerät einschalten (Netzstecker anschließen) und gleichzeitig die Ok-Taste am Gerät solange gedrückt halten (ca. 5 Sekunden), bis „Forc“ erscheint,533 anschließend beginnt die Installation es erscheint "U LD" im Vfd. Erst danach die Taste loslassen534 Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.535 * Nach der Installation es erscheint "SUCC" im Vfd bootet der Receiver neu und das Sendebild sollte erscheinen536 [[br]]537 [#point8 Top of Page]538 [[br]]539 540 '''Mips Models'''541 ----542 '''8.061 Atemio-Nemesis''' [=#point8.061] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])543 ----544 '' Wie installiere ich ein Atemio Nemesis Update Image? ''545 * Besuchen Sie die Atemio Homepage oder das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.33 Firmware Download Locations])546 * Entpacken Sie die ZIP-Datei auf ihr PC547 * Kopieren Sie den kompletten Ordner "atemio" auf auf einen in FAT32 formatierten USB-Stick.548 Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.549 Des Weiteren empfehlen wir günstige USB Sticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.550 * Schalten Sie das Gerät aus.551 * USB Stick mit den zuvor kopierten "atemio" Ordner anschließen552 * Gerät einschalten (Netzstecker anschließen), das Image wir automatisch erkannt und mit dem Drücken Vol-Up Taste (dritte von links) wird die Installation des Image bestätigt,553 anschließend beginnt die Installation. Bitte warten bis die Installation vollständig abgeschlossen wurde.554 Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.555 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen. Den USB Stick vorher entfernen.556 [[br]]557 [#point8 Top of Page]558 [[br]]559 ----560 '''8.062 Atemio5200''' [=#point8.062] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])561 ----562 '' Wie installiere ich ein Atemio 5200 Update Image? ''563 * Besuchen Sie die Atemio Homepage oder das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.33 IRD Download Locations])564 * Entpacken Sie die ZIP-Datei565 * Kopieren Sie nun die Firmware-Datei auf einen in FAT32 formatierten USB-Stick und entpacken Sie diese direkt auf dem USB-STick.566 Hinweis: Nach dem auspacken werden zwei Unterordner atemio/5x00 erstellt. Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.567 Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.568 * Schalten Sie das Gerät aus.569 * USB Stick mit der Ausgepackten Firmware-Datei anschließen570 * Gerät einschalten (Netzstecker anschließen) und drücken Sie die CH+ am Gerät (1 Taste von rechts) wenn es im Vfd (Lcd Display) des Gerätes angezeigt wird solange bis „Flashing...bzw.U-rf“ erscheint,571 anschließend beginnt die Installation. Erst danach die Taste loslassen572 Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.573 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen574 [[br]]575 [#point8 Top of Page]576 [[br]]577 ----578 '''8.063 Atemio6000''' [=#point8.063] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])579 ----580 '' Wie installiere ich ein Atemio 6000 Update Image? ''581 * Besuchen Sie die Atemio Homepage oder das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.33 IRD Download Locations])582 * Entpacken Sie die ZIP-Datei583 * Kopieren Sie nun die Firmware-Datei auf einen in FAT32 formatierten USB-Stick und entpacken Sie diese direkt auf dem USB-STick.584 Hinweis: Nach dem auspacken werden zwei Unterordner atemio/6000 erstellt. Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.585 Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.586 * Schalten Sie das Gerät aus.587 * USB Stick mit der Ausgepackten Firmware-Datei anschließen588 * Gerät einschalten (Netzstecker anschließen) und drücken Sie die CH+ am Gerät (1 Taste von rechts) wenn es im Vfd (Lcd Display) des Gerätes angezeigt wird solange bis „Flashing...bzw.U-rf“ erscheint,589 anschließend beginnt die Installation. Erst danach die Taste loslassen590 Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.591 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen592 [[br]]593 [#point8 Top of Page]594 [[br]]595 ----596 '''8.064 Atemio6100''' [=#point8.064] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])597 ----598 '' Wie installiere ich ein Atemio 6100 Update Image? ''599 * Besuchen Sie die Atemio Homepage oder das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.33 IRD Download Locations])600 * Entpacken Sie die ZIP-Datei601 * Kopieren Sie nun die Firmware-Datei auf einen in FAT32 formatierten USB-Stick und entpacken Sie diese direkt auf dem USB-STick.602 Hinweis: Nach dem auspacken werden zwei Unterordner atemio/6100 erstellt. Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.603 Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.604 * Schalten Sie das Gerät aus.605 * USB Stick mit der Ausgepackten Firmware-Datei anschließen606 * Gerät einschalten (Netzstecker anschließen) und drücken Sie die CH+ am Gerät (1 Taste von rechts) wenn es im Vfd (Lcd Display) des Gerätes angezeigt wird solange bis „Flashing...bzw.U-rf“ erscheint,607 anschließend beginnt die Installation. Erst danach die Taste loslassen608 Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.609 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen610 [[br]]611 [#point8 Top of Page]612 [[br]]613 ----614 '''8.065 Atemio6200''' [=#point8.065] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])615 ----616 '' Wie installiere ich ein Atemio 6200 Update Image? ''617 * Besuchen Sie die Atemio Homepage oder das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.33 IRD Download Locations])618 * Entpacken Sie die ZIP-Datei619 * Kopieren Sie nun die Firmware-Datei auf einen in FAT32 formatierten USB-Stick und entpacken Sie diese direkt auf dem USB-STick.620 Hinweis: Nach dem auspacken werden zwei Unterordner atemio/6200 erstellt. Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.621 Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.622 * Schalten Sie das Gerät aus.623 * USB Stick mit der Ausgepackten Firmware-Datei anschließen624 * Gerät einschalten (Netzstecker anschließen) und drücken Sie die CH+ am Gerät (1 Taste von rechts) wenn es im Vfd (Lcd Display) des Gerätes angezeigt wird solange bis „Flashing...bzw.U-rf"“ erscheint,625 anschließend beginnt die Installation. Erst danach die Taste loslassen626 Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.627 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen628 [[br]]629 [#point8 Top of Page]630 [[br]]631 ----632 '''8.071 Beyonwiz T4''' [=#point8.071] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])633 ----634 '' Wie installiere ich ein Atemio Nemesis Update Image? ''635 * Besuchen Sie die Atemio Homepage oder das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.33 Firmware Download Locations])636 * Entpacken Sie die ZIP-Datei auf ihr PC637 * Kopieren Sie den kompletten Ordner "atemio" auf auf einen in FAT32 formatierten USB-Stick.638 Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.639 Des Weiteren empfehlen wir günstige USB Sticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.640 * Schalten Sie das Gerät aus.641 * USB Stick mit den zuvor kopierten "atemio" Ordner anschließen642 * Gerät einschalten (Netzstecker anschließen), das Image wir automatisch erkannt und mit dem Drücken Vol-Up Taste (dritte von links) wird die Installation des Image bestätigt,643 anschließend beginnt die Installation. Bitte warten bis die Installation vollständig abgeschlossen wurde.644 Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.645 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen. Den USB Stick vorher entfernen.646 [[br]]647 [#point8 Top of Page]648 [[br]]649 ----650 '''8.081 Goldern interstar Xpeedlx1/2''' [=#point8.081] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])651 ----652 ''How do I install a Xpeedlx1/2 update image? ''653 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])654 * Extract the zip file655 * Now copy the unzipped firmware folder "xpeedlx3" to a formatted FAT32 USB stick.656 Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.657 * Turn off the Receiver and disconnect all USB devices.658 * Connect the USB stick with the update image file659 * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.660 661 Note: If installation does not start, use a different USB stick.662 •After successfully installing the receiver will reboot and the installed image should start-up663 [[br]]664 [#point8 Top of Page]665 [[br]]666 ----667 '''8.082 goldern interstar Xpeedlx3''' [=#point8.082] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])668 ----669 ''How do I install a Xpeedlx3 update image? ''670 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])671 * Extract the zip file672 * Now copy the unzipped firmware folder "xpeedlx3" to a formatted FAT32 USB stick.673 Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.674 * Turn off the Receiver and disconnect all USB devices.675 * Connect the USB stick with the update image file676 * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.677 678 Note: If installation does not start, use a different USB stick.679 •After successfully installing the receiver will reboot and the installed image should start-up680 [[br]]681 [#point8 Top of Page]682 [[br]]683 ----684 '''8.091 Miraclebox Ultra''' [=#point8.091] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])685 ----686 '' How do I install an Miraclebox Ultra Update UBI image? ''687 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])688 * Extract the zip file689 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.690 Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).691 Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.692 * Turn off the Receiver and disconnect all USB devices.693 * Connect the USB stick with the IRD file to your Receiver694 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".695 then the installation begins, Only then release the button.696 Note: If installation does not start , use a different USB stick.697 * After successfully installing the receiver will reboot and the installed image should start-up698 [[br]]699 [#point8 Top of Page]700 [[br]]701 ----702 '''8.092 Miraclebox Mini''' [=#point8.092] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])703 ----704 '' How do I install an Miraclebox Mini Update UBI image? ''705 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])706 * Extract the zip file707 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.708 Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).709 Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.710 * Turn off the Receiver and disconnect all USB devices.711 * Connect the USB stick with the IRD file to your Receiver712 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".713 then the installation begins, Only then release the button.714 Note: If installation does not start , use a different USB stick.715 * After successfully installing the receiver will reboot and the installed image should start-up716 [[br]]717 [#point8 Top of Page]718 [[br]]719 ----720 '''8.101 Sezam-Marvel''' [=#point8.101] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])721 ----722 ''How do I install a Sezam-Marvel update image? ''723 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])724 * Extract the zip file725 * Now copy the unzipped firmware folder "enigma2" to a formatted FAT32 USB stick.726 Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.727 * Turn off the Receiver and disconnect all USB devices.728 * Connect the USB stick with the update image file729 * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.730 731 Note: If installation does not start, use a different USB stick.732 •After successfully installing the receiver will reboot and the installed image should start-up733 [[br]]734 [#point8 Top of Page]735 [[br]]736 ----737 '''8.102 Sezam-1000HD''' [=#point8.102] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])738 ----739 ''How do I install a Sezam-1000HD update image? ''740 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])741 * Extract the zip file742 * Now copy the unzipped firmware folder "enigma2" to a formatted FAT32 USB stick.743 Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.744 * Turn off the Receiver and disconnect all USB devices.745 * Connect the USB stick with the update image file746 * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.747 748 Note: If installation does not start, use a different USB stick.749 •After successfully installing the receiver will reboot and the installed image should start-up750 [[br]]751 [#point8 Top of Page]752 [[br]]753 754 '''Aditional Info'''755 ----756 '''8.012 installation on other Fortis Receivers''' [=#point8.012] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])757 ----758 '''Installation Notes:'''759 760 ''If you wish to try or install titan you need to install an Atemio/Atevio factory loader. The original Atemio Bootloader has a security code within so an installation of Titan is not possible with any other fortis loader''761 762 ''If you wish to install Titan the loader version must be 1.54 or above. Titan versions above 1.32 require the new Iboot loader which needs to be installed first if not present.''763 764 ''There are various ways that are explained below:''765 766 [[br]]767 768 '''AAF Recovery Tool (ART) method'''769 770 * Install the AAF Recovery Tool (ART) and set up a connection to your receiver771 * Set the IP address and subnet mask of your uboot environment.772 * Reboot the receiver and reconnect to change the settings.773 * Install the factory loader and reboot.774 * The factory loader you installed is version 1.21 that you have to update to 1.54 to be compatible with Titan775 * Visit the [http:((www-atemio.de Atemio] homepage or the [http://www.aaf-digital.info/forum AAF digital forum] and download the latest Atevio/Atemio loaader (1.54).776 * Extract the zip file777 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.778 Note: The USB stick should not be formatted with windows. Use a separate program, such as the779 "HP USB Disk Storage Format Tool" (freeware program).780 Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.781 * Turn off the receiver and disconnect all USB devices.782 * Connect the USB stick with the IRD file to your receiver783 * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,784 and the installation begins. Only then release the button785 Note: Should the installation not start, try a different USB stick.786 * Should you have installed the loader successfully the receiver will reboot and the installed Loader should start-up.787 788 ''You may now install Titan''789 [[br]]790 [#point8 Top of Page]791 [[br]]792 793 '''Cross Flash Method'''794 795 ''This method explains how to install the HDF bootloader flash plugin to your fortis receiver and flash an Atemio/Atevio compatible bootloader from the plugin menu.''796 797 * Download the HDF Bootloader flash plugin from the [http://www.aaf-digital.info/forum AAF Digital forum].798 * Extract the zip file799 * Now copy the unzipped Plugin folder to a formatted FAT32 USB stick.800 Note: The USB stick should not be formatted with windows. Use a separate program, such as the801 " HP USB Disk Storage Format Tool" (freeware program).802 Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.803 * go to the plugins section in your receiver and install the plugin and then start it.804 * type in the password contained in the zip file and follow the onscreen prompts.805 * Should you have installed the loader successfully the receiver will reboot and the installed Loader should start-up.806 807 ''You may now install TitanNit''808 [[br]]809 [#point8 Top of Page]810 [[br]]811 812 '''Reseller Changer Tool Method'''813 814 ''This method explains how to change the Reseler ID of an Atemio/Atevio compatible bootloader and flash it to any compatible Fortis receiver from the plugin menu.''815 816 817 * Visit the [http://www.atemio.de Atemio] homepage or the [http://www.aaf-digital.info/forum AAF digital forum] and download the latest Atevio/Atemio loader.818 * Extract the zip file819 * use the reseller ID changer tool and change the IRD to that of your reseller ID.820 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.821 Note: The USB stick should not be formatted with windows. Use a separate program, such as the822 " HP USB Disk Storage Format Tool" (freeware program).823 Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.824 * Turn off the Receiver and disconnect all USB devices.825 * Connect the USB stick with the IRD file to your Receiver.826 * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,827 and the installation begins. Only then release the button828 Note: If installation does not start , use a different USB stick.829 * Should you have installed the loader successfully the receiver will reboot and the installed Loader should start-up.830 831 832 This method requires you to also change the reseller ID to be able to install TitanNit.833 834 835 '''Be aware should it the installation fail or a loss of Power occur during the flashing process you could brick your receiver as there is no recovery method. Compatibility with other receivers is not guaranteed but you may find a list of compatible receivers in the [wiki:Supported-Receivers#point7 Supported Receivers] section.'''836 [[br]]837 [#point8 Top of Page]838 [[br]]839 ----840 '''8.111 Uninstalling Titan''' [=#point8.111] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])841 ----842 If you have an Atemio/Atevio or UFS receiver all you have to do is install your original ird file as explained above and no bootloader changes are neccessary.843 844 Uninstalling titan and switching back to the original reseller loader can't be done (easily) for other fortis receivers but there is one simple alternative method outlined below.845 846 847 '''Uninstalling Titan on non Atemio/Atevio receiver and restore Reseller ID with Maxi-uboot'''848 849 If you have iboot installed then you must install a version of TitanNit older than 1.32 before using this method.850 851 This will install the factory Atemio loader that is compatible with the AAF Recovery Tool (ART) to be able to install the Maxiuboot Loader.852 853 In order for this method to work make sure the setting Allow __"Iboot Update"__ is enabled in [wiki:Remote-Device-Control#point4.6 Iboot].854 855 When successfully achieved you may start up ART from your PC and install Maxiuboot.856 857 [[br]]858 859 Once installed you may set up your bootargs and change your Reseller ID back to its factory settings. For flashin original Firmware or other Software please refere to your receivers' manual or instructions.860 [[br]]861 [#point8 Top of Page]862 [[br]]863 864 ----865 '''8.112 Update TitanNit''' [=#point8.112] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])866 ----867 There are two ways to update your TitanNit version and there are merits to both methods :868 869 IRD offline method see [#point8 Installation / Recovery] and select your Reciever model to show information on how to update titan using an IRD titannit image.870 [[br]]871 ''Note: using this method plugins and files stored to Flash will be formatted when the update is proformed.872 Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .''873 874 Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.875 [[br]]876 ''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''877 [[br]]878 [#point8 Top of Page]879 [[br]]880 881 ----882 '''8.113 IRD Download Locations''' [=#point8.113] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])883 ----884 * [wiki:Manufactures#point13 13 Hersteller] - [http://atemio.de/index.php/software-updates Stable Images][[br]]885 * [wiki:Community#point14 14 Community] - Download locations[http://atemio.dyndns.tv/nightly-images/ Index of /nightly-images][[br]] [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]]886 [[br]]887 888 '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]889 * [http://sbnc.dyndns.tv/trac/wiki/de/Remote-Device-Control#point4.6 iboot sh4 flashen and recovery ][[br]]890 891 [[br]]892 893 894 [#point8 Top of Page]895 [[br]] -
wiki/pages/de/Interface-Operation
r37662 r43267 1 [[TranslatedPages]]2 ----3 '''3 Oberfläche und Bedienung''' [=#point3] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])4 ----5 6 ----7 '''dieser WIKI Abschnitt befindet sich in Bearbeitung - tote Links, teilweise englische Texte und fehlende Bilder sind möglich'''8 ----9 10 == Oberfläche und Bedienung ==11 12 Dieser Abschnitt enthält die Informationen über die Bildschirmmenüs innerhalb TitanNit mit deren Inhalten und Funktionen, sowie hilfreiche Informationen und Vorgehensweisen um Ihre TitanNit Box bestmöglich zu bedienen.13 14 15 Hinweis: Die Bilder in diesem Bereich stammen alle aus dem Standard Skin der Software und können sich im lauf der Zeit auch leicht verändert haben.16 Wenn Sie einen bestimmten Menüpunkt oder das Element bei Ihnen nicht sehen wählen Sie bitte den Standard-Skin aus dem Menü wie folgt:17 18 Drücken Sie die __ "Menu"__ Taste und wählen __ "Einstellungen" __ nach unten scrollen, zu __"Skin"__ und wählen Sie __"Default" __ aus dem Menü.19 Der Decoder wird dann einen Neustart mit dem neuen gewählten __ Default__ Skin machen.20 21 22 [[Image(source:/wiki/Wiki-Pictures/DE/Mainmenu.jpg)]][[br]]23 24 25 Oberfläche und Bedienung Inhalte26 wählen Sie bitte einen Menüpunkt aus dem gui für weitere Informationen27 28 * ([#point3.1 Timer und EPG])29 * ([#point3.2 Media Center])30 * ([#point3.3 Medien Abspielen])31 * ([#point3.4 Erweiterungen])32 * ([#point3.5 System])33 * ([#point3.6 Einstellungen])34 * ([#point3.7 Information])35 * ([#point3.8 Standby / Ausschalten])36 37 38 [[br]]39 ----40 '''3.1 Timer und EPG''' [=#point3.1] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])41 42 ----43 44 [[Image(source:/wiki/Wiki-Pictures/DE/Recordsand_EPG.jpg)]][[br]]45 46 Das Aufnahmen und EPG-Menü enthält all die verschiedenen Ansichten und Sucheinstellungen für das EPG. [[br]]47 Dort werden auch die Einstellungen für Timer-Aufnahmen fixiert. [[br]]48 Bitte wählen Sie einen Menüpunkt für weitere spezifische Informationen zu diesem Artikel.[[br]]49 50 * ([wiki:EPG-Short-View#point3.1.1 EPG Kurzübersicht])51 * ([wiki:Single-EPG#point3.1.2 Einfach EPG])52 * ([wiki:Multi-EPG#point3.1.3 Multi EPG])53 * ([wiki:Graphic-EPG#point3.1.3 Graphisches EPG])54 * ([wiki:EPG-Search#point3.1.4 EPG Suche])55 * ([wiki:Records#point3.1.5 Timer Aufnahmen])56 [[br]]57 58 ----59 '''3.2 Media Center''' [=#point3.2] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])60 ----61 [[br]]62 63 [[Image(source:/wiki/Wiki-Pictures/DE/Media_Center.jpg)]][[br]]64 65 66 * ([wiki:Audio-Player#point3.2.1 Musik abspielen])67 * ([wiki:Video-Player#point3.2.2 Filme abspielen])68 * ([wiki:Picture-Player#point3.2.3 Fotos anzeigen])69 * ([wiki:Mediathek#point3.2.4 Online Mediathek])70 * ([wiki:File-Browser#point3.2.5 Datei Browser])71 * ([wiki:Internet-Browser#point3.2.6 Internet Browser])72 * ([wiki:Weather#point3.2.7 Wetter anzeigen])73 74 75 [[br]]76 77 ''' Information'''78 79 80 Es ist eine Ansammlung von Playern jeglicher Art (Für lokale oder stream Files aus dem Lokalen Netzwerk oder Internet)81 82 '''Musik abspielen'''83 * Filelist Modus (in verschiedenen Ansichten möglich schnell, default, groß, cover, fullcover)84 * Playlist Modus (interne playlisten pls und externe m3u)85 * Automatische MediaDB Anbindung dadurch werden Cover und iD3Tag infos aus der mp3 extrahiert86 * Zufall Modus (random)87 * Wiederholungs Modus (repeat)88 * Screensaver (Titeltext, scrollende Bilder, springende Bilder, Hintergrundbilder)89 * Radio Modus (über m3u Files können internet streams wiedergegeben werden in allen gängigen Protokollen rtmp, rtmpe, rts, rtp, mms, http)90 * viele gängigen Formate werden durch den Install des Codecpacks unterstützt. Ohne dieses werden nur standard Formate (mp3) abgespielt.91 * Autoplay des nächsten Files92 * Spungfunktion (seeken 1-3 10s ,4-6 30s ,7-9 60s)93 * Spulen << >>94 * Mounter Modus (iso, img, rar)95 * Diverse Einstellmöglichkeiten im Einstellungs Screen96 * Diverse Sortierungs Möglichkeiten97 98 '''Filme abspielen'''99 * Filelist Modus (in verschiedenen Ansichten möglich schnell, default, groß, cover, fullcover)100 * Playlist Modus (interne Playlisten pls und externe m3u)101 * Automatische MediaDB Anbindung. Dadurch werden Cover, Hintergundbilder und Imdb infos aus dem Internet geladen102 * Zufall Modus (random)103 * Wiederholungs Modus (repeat)104 * Streaming Modus (über m3u Files können Internet Streams in vielen gängigen Protokollen (rtmp, rtmpe, rts, rtp, mms, http) wiedergegeben werden.105 * viele gängigen Formate werden durch den Install des Codecpacks unterstützt. Ohne dieses werden nur standard Formate (ts, avi, mpg)angezeigt und abgespielt.106 * Wiedergabe an der zuletzt beendeter Stelle beginnen107 * Autoplay des nächsten Files108 * Mounter Modus (iso, img, rar)109 * Dvd Material (video_ts, usb dvd laufwerk) aber nur wenn die entspechende Erweiterung installiert ist (DvdPlayer)110 * Diverse Einstellmöglichkeiten im Einstellungs Screen111 * Diverse Sortierungs Möglichkeiten112 * Spungfunktion (seeken 1-3 ,4-6 ,7-9 mit den werte aus den Titan Einstellungen)113 * Spungfunktion (seeken über Steuerkreuz hoch/runter 10min links/rechts 1min)114 * Im Filelist Modus Infotaste (Zusatzmenu Datei löschen, Imdb, ...)115 * Im Play Modus Rote Taste (Zusatzmenu Imdb, ...)116 * Im Play Modus Grüne Taste (Bild Verhältniss einstellbar)117 * Im Play Modus Gelbe Taste (Audiospur Auswahl)118 * Im Play Modus Blaue Taste (Screensaver einstellbar)119 * Im Play Modus Text Taste (Untertitel einstellbar)120 * externer Untertitel Support (srt/sub Dateien müssen den selben Namen haben wie das Videofile)121 * interner Untertitel Support (dvds/mkv Dateien mit integrierten Untertiteln)122 * Manuelle Imdb Suche für [http://www.imdb.com/ Imdb/Cover]123 * Hintergrungbilder einstellbar (nur im Fullcover Interval/Anzahl)124 125 '''Fotos anzeigen'''126 * Filelist Modus (in verschiedenen Ansichten möglich schnell, default, groß, cover) (Cover bedeutet in dem Fall Vorschaubild)127 * Playlist Modus (interne playlisten pls und externe m3u)128 * Lückenlose Diashow ohne Wartezeiten ausser beim ersten File129 * Zufall Modus (random)130 * Wiederholungs Modus (repeat)131 * unterstütze Formate png / jpg132 * Mounter Modus (iso, img, rar)133 * Diverse Einstellmöglichkeiten im Einstellungs Screen134 * Diverse Sortierungs Möglichkeiten135 * Hintergrund Radio einstellbar136 137 '''Online MediaThek'''138 * Ansicht in 2/6/12/24/30 Bildern einstellbar139 * [http://www.youtube.com/ Youtube] / [http://www.myvideo.de/ Myvideo] / [http://www.zdf.de/ZDFmediathek Zdf] / [http://www.ardmediathek.de/ Ard]140 * [http://rtl-now.rtl.de/ Rtl] / [http://www.rtl2.de/video/ Rtl2Now] / [http://www.superrtlnow.de/ SuperRtl] / [http://www.voxnow.de/ VoxNow] (bezahl Streams sind standartmässig ausgeblendet können aber sichtbar gemacht werden)141 * [http://www.netzkino.de Netzkino] / [http://www.tectime.tv/ DrDish] / [http://www.giga.de Giga]142 * [http://www.beeg.com Beeg] / [http://www.xvideos.com Xvideos] (xxx) (per Kinderschutz Pin gesichert)143 * [https://gitorious.org/neutrino-mp/max10s-neutrino-mp/raw/e4fefb51121d7886b81227eb1215da049e1a729a:data/webtv/webtv.xml InternetTv] (Livestreams)144 * [http://dir.xiph.org/yp.xml InternetRadio] (Livestreams)145 * Favoriten Support146 * Durch das zusätzlich installierbare Codecpack werden weitere Anbieter freigeschaltet.147 * Lokales Speichern der Streams bei einigen Theken möglich148 * Memory Buffer einstellbar für ruckelfreies Streamen149 150 '''Datei Browser'''151 * Daten kopieren152 * Daten verschieben153 * Daten löschen154 * Daten umbennen155 * Ordner erstellen156 157 '''Internet Browser''' (wenn installiert)158 * Steuerung per Fernbedienung159 * Favoriten Support160 161 '''Wetter Plugin'''162 * Standort Auswahl163 164 ----165 '''3.3 Media player''' [=#point3.3] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])166 167 168 169 ----170 171 172 [[Image(source:/wiki/Wiki-Pictures/DE/Media_player.jpg)]][[br]]173 174 Der Media player ist ein Dateibrowser um lokale Medien abzuspielen.175 176 177 '''Funktionen der Farbtasten'''178 179 Die __"Farbtasten"__ am unteren Rand des Bildschirms öffnen Untermenüs und zusätzliche Optionen.180 181 ||'''rote Taste: (Sortierung)''' ||bestimmt die Sortierkriterien der Inhalte der Dateiliste.||182 ||'''grüne Taste: (Auswahl)''' ||spielt die gewählte Datei ab.||183 ||'''gelbe Taste: (EPG)''' ||zeigt die EPG Informationen der gewählten Datei (wenn vorhanden)||184 ||'''blaue Taste: (Sortierung)''' ||bestimmt die Sortierkriterien der Inhalte der Dateiliste.||185 ||'''Info Taste: (Info)''' ||ruft IMDB/TMDB Informationen der gewählten Media Datei ab.||186 187 [[br]]188 189 ----190 '''3.4 Erweiterungen''' [=#point3.4] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])191 192 193 ----194 195 196 [[Image(source:/wiki/Wiki-Pictures/DE/Extentions.jpg)]][[br]]197 198 Das Erweiterungs Menü beinhaltet Pakete um das Titan Betriebssystem auszubauen.199 200 * ([wiki:Plugins#point3.4.1 Plugins])201 * ([wiki:Change-Feed#point3.4.2 Feedadresse hinzufügen])202 * ([wiki:TPK-Upgrade#point3.4.3 Aktualisieren (Online)])203 * ([wiki:TPK-Install#point3.4.4 Installieren (Online)])204 * ([wiki:TPK-Tmp#point3.4.5 Installieren (tmp)])205 * ([wiki:TPK-Media#point3.4.6 Installieren (Lokal)])206 * ([wiki:TPK-Remove#point3.4.7 Entfernen])207 208 [[br]]209 210 ----211 '''3.5 System''' [=#point3.5] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])212 213 214 215 ----216 217 [[Image(source:/wiki/Wiki-Pictures/DE/System.jpg)]][[br]]218 219 Das System Menü beinhaltet Einstellungen der Hardware und Software.220 221 * ([wiki:Channel-Service#point3.5.1 Sendersuche])222 * ([wiki:Common-Interface#point3.5.2 CI-Module])223 * ([wiki:Smart-Card-Reader#point3.5.3 Kartenleser])224 * ([wiki:Network#point3.5.4 Netzwerk])225 * ([wiki:Hard-Disk#point3.5.5 Festplatte])226 * ([wiki:VFDisplay#point3.5.6 VFDisplay])227 * ([wiki:System-Update#point3.5.7 System aktualisieren])228 * ([wiki:Backup#point3.5.8 Sicherung erstellen])229 * ([wiki:Settings-Backup-Restore#point3.5.9 Einstellungen sichern/wiederherstellen])230 * ([wiki:Receiver-Unlock#point3.5.10 Receiver freischalten])231 232 [[br]]233 ----234 '''3.6 Einstellungen''' [=#point3.6] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])235 236 237 238 ----239 240 241 [[Image(source:/wiki/Wiki-Pictures/DE/Settings.jpg)]][[br]]242 243 Das Einstellungs Menü beinhaltet die unterschiedlichen Programm Einstellungen des Receivers.244 Optische und inhaltliche Anpassungen können vorgenommen werden.245 246 * ([wiki:AV-Settings#point3.6.1 AV Einstellungen])247 * ([wiki:Language#point3.6.2 Sprachen])248 * ([wiki:Timezone#point3.6.3 Zeitzone])249 * ([wiki:Red-Button#point3.6.4 rote Taste])250 * ([wiki:Blue-Button#point3.6.5 blaue Taste])251 * ([wiki:Media-Button#point3.6.6 media Taste])252 * ([wiki:Adjust#point3.6.7 Erweitert])253 * ([wiki:Skin-Adjust#point3.6.7 Skin Einstellungen])254 * ([wiki:Skin#point3.6.8 Skin Auswahl])255 * ([wiki:Screensaver-Adjust#point3.6.9 Bildschrimschoner])256 * ([wiki:Timeshift-Settings#point3.6.10 Timeshift])257 * ([wiki:Record-Path#point3.6.11 Aufnahmen])258 * ([wiki:EPG-Settings#point3.6.12 EPG])259 * ([wiki:Child-Protection#point3.6.13 Jugendschutz])260 * ([wiki:Restore-Default-Settings#point3.6.14 Werkseinstellungen herstellen])261 * ([wiki:Video-Settings#point3.6.15 Bildeinstellungen])262 * ([wiki:Channel-Edit#point3.6.16 Senderliste bearbeiten])263 * ([wiki:MediaDB-Settings#point3.6.17 MediaDB])264 * ([wiki:Auto-Start-Settings#point3.6.18 Auto Start])265 266 [[br]]267 268 ----269 '''3.7 Information''' [=#point3.7] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])270 271 272 273 ----274 275 276 [[Image(source:/wiki/Wiki-Pictures/DE/Information.jpg)]][[br]]277 278 Im Information Menü können diverse Daten des Receivers, Betriebsystems, Hardware, Streams, ... abgerufen werden.279 Hilfe und Kontaktinformationen sind ebenfalls enthalten.280 281 * ([wiki:Service#point3.7.1 Sender])282 * ([wiki:News-letter#point3.7.2 Newsletter])283 * ([wiki:About#point3.7.3 Über])284 * ([wiki:Streaming#point3.7.4 Streaming])285 * ([wiki:Atemio-Hotline#point3.7.5 Atemio (Hotline)])286 * ([wiki:Titan-Changelog#point3.7.6 Titan Changelog])287 * ([wiki:Git-Changelog#point3.7.7 Git Changelog])288 * ([wiki:System-Info#point3.7.8 System Info])289 * ([wiki:Log#point3.7.9 Log])290 291 [[br]]292 293 ----294 '''3.8 Standby / Ausschalten''' [=#point3.8] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])295 296 297 298 ----299 300 301 [[Image(source:/wiki/Wiki-Pictures/DE/Standby_Poweroff.jpg)]][[br]]302 303 Standby/Ausschalten bietet unterschiedliche Ausschalt Vorgänge304 305 * '''Ausschalten:''' Box fährt in den DeepStanby und schaltet komplett ab.306 * '''Standby:''' Box schaltet nur Bild und Ton ab (Stromverbrauch deutlich höher als ausgeschaltet, aber dafür sofort307 wieder betriebsbereit). Alle Funktionen über das WebIF bleiben aktiv.308 * '''Neustarten:''' Receiver wird komplett heruntergefahren und neu gestartet. erforderlich um Einstellungen zu übernehmen.309 * '''Titan Neustart:''' Neustart des Betriebssystems (schneller)310 * '''([wiki:Power-Off-Timer Ausschalt Timer])''' Dient zum Einstellen eines Ausschaltzeitpunkts311 312 313 314 315 [[br]] -
wiki/pages/de/dicslaimer
r37662 r43267 1 [[TranslatedPages]]2 ----3 '''17 Generic Disclaimer''' [=#point17] ([wiki:Wiki-en#point0 Contents]) ([WikiStart#point0 Main page])4 ----5 6 TitanNit is a Semi closed source setop box linux based operating system software. The services provided by AAF Digital including (including developer tools, resources, download areas, files, source code, product information, documentation, communication forums, bug tracker, wiki, internet, streaming, forum etc. all collectively called "services") that the TitanNit Project, its members, and websites provide are for the purpose of providing support to the community and aditional functionality from the original system software provided by the manufactures of the supported hardware.7 The services provided bt the AAF digital team is provided “as is”, "with all faults", and "as available" basis, without warranty of any kind, either express or implied. Your use of these services is at your own risk. TitanNit disclaims all warranties.8 9 TitanNit disclaims liability for any direct, indirect, incidental, special, consequential, exemplary, punitive or other damages, or lost profits, that may result directly or indirectly from the use of these services and any material that is downloaded or obtained through the use of these services.10 11 This includes, without limitation, any damage to computer systems, hardware or software, loss of data, or any other performance failures, any errors, bugs, viruses or other defects that result from, or are associated with the use of these services.12 13 None of the contributors, sponsors, administrators, or anyone else connected with TitanNit in any way whatsoever can be responsible for the appearance of any inaccurate or libelous information or for your use of the information contained in or linked from these services.14 15 AAF Digital reserve the right to to remove and add services as they see fit without warning.16 17 18 19 '''No contract, limited license'''20 21 22 Please make sure that you understand that these services is being provided freely, and that no kind of agreement or contract is implied between the owners or users of these services, the owners of the servers upon which it is housed, the individual contributors to these services, any project administrators, sysops or anyone else who is in any way connected with the project subject to your claims against them directly. You are being granted a limited license to copy or install anything from this site; it does not create or imply any contractual or extracontractual liability on any of it's agents, members, organizers or other users. Neither is anyone responsible should someone change, edit, modify or remove any information contained with in these services.23 24 25 26 '''Trademarks'''27 28 29 Any of the trademarks, service marks, collective marks, design rights or similar rights that are mentioned, used or cited in the services provided for TitanNit are the property of their respective owners. Their use in any "service" does not imply that you may use them for any other purpose other than for the same or a similar use as contemplated by the original authors concent.30 the AAF Digital team will make due effort to outline the services that are provided by other's and give them credit where aplicable.31 32 33 '''Information and Content'''34 35 36 Publication of information found in any of the services provided for TitanNit may be in violation of the laws of the country or jurisdiction from where you are viewing this information. The servers providing these services are located in different locations of the world and is maintained in reference to the protections afforded under local and federal law in respect to their location. Laws in your country or jurisdiction may not protect or allow the same kinds of speech or distribution. the AAF digital team does not encourage the violation of any laws; and cannot be responsible for any violations of such laws, should you link to the domain of the websites of these services or use, reproduce, or republish the information contained therein.37 38 39 '''Final Remarks'''40 41 42 Enjoy TitanNit and the other services provided by AAF Digital and thanks for selecting us!43 -
wiki/pages/en/prozesslist
r40777 r43267 1 [[TranslatedPages]]2 >----3 >'''3.7.8.6.8 Prozesslist''' [=#point3.7.8.6.8] ([WikiStart#point3.7.8.6 System Infos (Back])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/EN/prozesslist.jpg)]][[br]]7 >8 Here you can view the detailed Process info.9 10 [[br]]11 12 13 [[br]] -
wiki/pages/nl/AV-Settings
r40899 r43267 1 [[TranslatedPages]]2 >----3 >'''3.6.1 AV Settings''' [=#point3.6.1] ([wiki:Interface-Operation#point3.6 Settings (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/NL/AV-Settings.jpg)]][[BR]]8 >9 > here you can setup your audio and visual settings.10 11 [[br]]12 13 ||'''Resolution (Default)''' ||Set the default resolution of the decoder.||14 ||'''Resolution Current:''' ||Shows the current resolution of the decoder.||15 ||'''Auto Resolution:''' ||Do you want the EPG file to be deleted after being read.||16 ||'''Policy:''' ||If the image does not suit the screen format what method shuld the decoder use to best fill the display.||17 ||'''Aspect:''' ||Set the aspect ratio of the display.||18 ||'''Colour Format''' ||Set the colour format of the hdmi output.||19 ||'''Colour Format Scart/ Composite:''' ||Set the colour format of the composite and scart output.||20 ||'''Audio Source:''' ||Select the audio source format.||21 ||'''Ac3 Default:''' ||Do you wish for the default audio format to be AC3.||22 ||'''Ac3 Mode:''' ||Set the output conversion format of the AC3 stream.||23 ||'''Audio Delay:''' ||Set the delay or advance time of the audio signal to sync it with the video signal.||24 ||'''Inc AC3 Audio in %:''' ||Increace ac3 audio volume in % of total volume.||25 ||'''3D Mode:''' ||Output the tv signal in side by side or vertical 3d format.||26 ||'''two step mute:''' ||Set the default function of the mute button lower volume then mute or just mute.||27 ||'''automatic restart last subtitle:''' ||load the last used subtitle when playing back a recording or stream.||28 ||'''Sound ampflier (tv modus/ internal player)''' ||Increace the volume amplification when watching tv or using the default media player.||29 ||'''Sound ampflier (external player)''' ||Increace the volume amplification when using a third party media player.||30 31 To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.32 33 34 35 [[br]] -
wiki/pages/nl/Atemio-Hotline
r39063 r43267 1 [[TranslatedPages]]2 >----3 >'''3.7.5 Atemio (hotline)''' [=#point3.7.5] ([wiki:Interface-Operation#point3.7 Information (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/NL/Atemio_Hotline.jpg)]][[BR]]8 >9 > here you can view contact info from atemio.10 11 [[br]]12 -
wiki/pages/nl/Auto-Start-Settings
r39063 r43267 1 [[TranslatedPages]]2 >----3 >'''3.6.18 Autostart Settings''' [=#point3.6.18] ([wiki:Interface-Operation#point3.6 Settings (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/NL/Autostart_Settings.jpg)]][[BR]]8 >9 >here you can change the startup settings.10 please select a menu item for more information11 [[br]]12 13 * ([wiki:Default-Autostart#point3.6.18.1 Default Autostart])14 * ([wiki:Audio-Video-Sat#point3.6.18.2 Audio/Video/Sat])15 * ([wiki:USB-Device#point3.6.18.3 USB Device])16 * ([wiki:Autostart-Network#point3.6.18.4 Network])17 * ([wiki:Child-Safety#point3.6.18.5 Child Safety])18 19 [[br]] -
wiki/pages/nl/Automatic-Search
r39063 r43267 1 [[TranslatedPages]]2 >----3 >'''3.5.2.1 Automatic Search''' [=#point3.5.2.1] ([wiki:Channel-Service#point3.5.1 Channel-Service (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/NL/Automatic-Search.jpg)]][[br]]7 >8 Here you can proform an automatic channel scan.9 10 [[br]]11 12 13 14 ||'''Type of Scan''' ||The type of scan in progress (Automatic).||15 ||'''Scan:''' ||???.||16 ||'''Clear Before Scan:''' ||Select to clear channel data before scan.||17 ||'''Only Free to Air Services:''' ||During scan ignore pay tv services.||18 ||'''Blindscan:''' ||Scan for unknown satellite transponders.||19 ||'''Update channel Name''' ||If upon a rescan the channel name changes update the channel name in TitanNit.||20 ||'''Entrys in Favourites''' ||if scaned channels are found in current favourites list what should be done.||21 ||'''Remove Empty Favourites''' ||Remove favourites list if they have no channels in them.||22 ||'''Remove Unused Channels From Favourites''' ||Remove channels from favourites that have ceased transmission.||23 24 25 To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.26 27 '''Coloured Button's Functions'''28 29 The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the epg settings menu.30 Please see below for more info on the functions of these buttons:.31 32 ||'''Red Button: (Start scan)''' ||Start channel Scan with the selected settings.||33 ----34 '''After Scan Menu'''35 ----36 [[br]]37 38 The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options after the scan hac sompleted menu.39 Please see below for more info on the functions of these buttons:.40 41 ||'''Red Button: (Save)''' ||Select a channel you wish to save and select the green button to save it in to the channel listing.||42 ||'''Green Button: (Save All)''' ||Store all channels in the channel listing.||43 44 45 46 -
wiki/pages/nl/Autostart-Network
r39063 r43267 1 [[TranslatedPages]]2 ----3 === Autostart Settings ===4 '''3.6.18.4 Network''' [=#point3.6.18.4] ([wiki:Auto-Start-Settings#point3.6.18 Autostart Settings (Back)]) ([wiki:Wiki#point0.2 Contents]) ([WikiStart#point0 Main page])5 ----6 7 8 [[Image(source:/wiki/Wiki-Pictures/DE/Autostart_Settings-network.jpg)]][[br]]9 10 Here you can check and adjust autostart network settings.11 12 [[br]]13 14 ||'''NFS Server:''' ||enable the NFS Server on startup. ||15 ||'''Samba Server:''' ||Enable the Samba server on startup. ||16 ||'''Scan WLAN:''' ||scan for Wireless lan connections on startup. ||17 ||'''ntpdate:''' ||Alow update of the date server . ||18 19 To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.20 21 [[br]] -
wiki/pages/nl/Backup
r40899 r43267 1 [[TranslatedPages]]2 >----3 >'''3.5.8 Backup''' [=#point3.5.8] ([wiki:Interface-Operation#point3.5 System (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >6 >7 >[[Image(source:/wiki/Wiki-Pictures/NL/system_backup.jpg)]][[br]]8 >9 Here you can run a manual backup to /tmp or /var/backup if there is insufficent free space you can use a usb device.10 11 please ensure these folders are installed on the device for the Backup to operate.12 13 [[br]]14 15 To Exit from the backup menu press __"Exit"__.16 17 [[br]]18 ----19 20 '''Coloured Button's Functions"21 22 The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the epg settings menu.23 please see below for more info on the functions of these buttons:.24 25 ||'''Red Button: (backup)''' ||This will Start the backup process please follow the onscreen propmps.||26 27 [[BR]] -
wiki/pages/nl/Blind-Scan-Settings
r40899 r43267 1 [[TranslatedPages]]2 >----3 >'''3.5.1.6 Blind Scan Settings''' [=#point3.5.1.6] ([wiki:Channel-Service#point3.5.1 Channel-Service (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/NL/Blind-Scan-Settings.jpg)]][[br]]7 >8 Here you can proform a blind scan.9 10 [[br]]11 12 ||'''Tuner type''' ||Select the recption tuner type.||13 ||'''Minimal Frequency:''' ||Set the mimimum frequency to scan for during blind scan.||14 ||'''Maximum Frequency:''' ||Set the maximum frequency to scan for during blind scan.||15 ||'''Step Frequency:''' ||Set the step size of the frequency in mhz from the start frequency to scan.||16 ||'''Minimal Signalrate:''' ||Set the minimum Signal rate to scan for during blind scan.||17 ||'''Maximum Signalrate''' ||Set the Maximum Signal rate to scan for during blind scan.||18 ||'''Step Signalrate''' ||Set the brightness of the led when the system is in standby.||19 ||'''Use only standard forward error correction (FEC)''' ||???.||20 ||'''DVB-S Services Only:''' ||Scan only for SD channels.||21 ||'''Only Default FEC:''' ||???.||22 23 ''note: not all these options are relavant or shown and it depend's on the selected tuner type''24 25 To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.26 -
wiki/pages/nl/Blue-Button
r40899 r43267 1 [[TranslatedPages]]2 >----3 >'''3.6.5 Blue Button''' [=#point3.6.5] ([wiki:Interface-Operation#point3.60 Settings (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/NL/Blue_Button.jpg)]][[BR]]8 >9 >here you can configure what happens with the press of the blue button10 11 12 [[br]] -
wiki/pages/nl/CPU
r40899 r43267 1 [[TranslatedPages]]2 >----3 >'''3.7.8.6.1 CPU''' [=#point3.7.8.6.1] ([wiki:System-Infos#point3.7.8.6 System Infos (Back])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/NL/CPU.jpg)]][[br]]7 >8 Here you can view the detailed cpu info.9 10 [[br]]11 12 13 [[br]] -
wiki/pages/nl/Change-Feed
r40899 r43267 1 [[TranslatedPages]]2 >----3 >'''3.4.2 Change Feed''' [=#point3.4.2] ([wiki:Interface-Operation#point3.4 Extentions (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/NL/Change_Feed.jpg)]][[BR]]8 >9 >here you can sett up an aditional feed to obtain extra plugins not found in the online library10 11 [[br]] -
wiki/pages/nl/Channel-Edit
r40899 r43267 1 [[TranslatedPages]]2 >----3 >'''3.6.15 Channel Edit''' [=#point3.6.15] ([wiki:Interface-Operation#point3.6 Settings (Back)])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/NL/Channel_Edit.jpg)]][[BR]]8 >9 >here you can edit your channel data10 11 12 [[br]]13 14 ||'''Copy Service:''' ||Enable channel copy mode, this enables the user to copy channels to another boquet.||15 ||'''Remove Service:''' ||Enable channel remove mode, this enables the user to remove channels from the currently selected boquet.||16 ||'''Move Service:''' ||Enable channel move mode, this enables the user to move channels to another boquet.||17 ||'''Protect Service:''' ||Enable channel protect mode, this enables the user to pin protect seletcted channels in the currently selected boquet.||18 ||'''Rename Service:''' ||Enable channel rename mode, this enables the user to copy channels to another boquet.||19 ||'''Sort Service:''' || selecting this will sort all channels in all boquets by alphebitac order.||20 ||'''Set Start Channel:''' ||Here you can set the channel you wish for the receiver to show on startup.||21 ||'''Delete Start Channel:''' ||Here you can remove the currently selected startup channel that shows on startup.||22 23 To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes. -
wiki/pages/nl/Channel-Service
r40899 r43267 1 [[TranslatedPages]]2 >----3 >'''3.5.1 Channel Service''' [=#point3.5.1] ([wiki:Interface-Operation#point3.5 System (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/NL/system-Channel_Service.jpg)]][[BR]]8 >9 Here you can setup your tuner and proform a channel scan.10 please select a menu item for more information11 [[br]]12 13 * ([wiki:Tuner-Configuration#point3.5.1.1 Tuner configuration])14 * ([wiki:Automatic-Search#point3.5.1.2 Automatic Search])15 * ([wiki:Manual-Search#point3.5.1.3 Manual Search])16 * ([wiki:Rotor-Settings#point3.5.1.4 Rotor Settings])17 * ([wiki:Sat-Finder#point3.5.1.5 Sat Finder])18 * ([wiki:Blind-Scan-Settings#point3.5.1.6 Blind Scan Settings])19 * ([wiki:Create-Transponder-List#point3.5.1.7 Create Transponder List])20 * ([wiki:Create-Default-Favorites#point3.5.1.8 Create Default Favorites])21 22 23 [[br]]24 -
wiki/pages/nl/Child-Protection
r40899 r43267 1 [[TranslatedPages]]2 >----3 >'''3.6.12 Child Protection''' [=#point3.6.12] ([wiki:Interface-Operation#point3.6 Settings (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/NL/Child_Protection.jpg)]][[BR]]8 >9 > here you can setup your key lock and child portection settings.10 11 [[br]]12 13 14 ||'''Pin Code Menu''' ||Select the pin code used in the menu.||15 ||'''Pin Code Channel:''' || select the pin code used to lock TV Channels.||16 ||'''Protect Channels:''' || Do you wish to enable the locking of protected channels.||17 ||'''Age Protect:''' || do you wish to protect channels based on age restrictions.||18 ||'''Protect Channel Freetime (min''' || After a specific time do you wish to re-enable the lock on protected channels if it is currently beign displayed.||19 ||'''Protect menu:''' || Do you wish to place a lock on the menu of the reciever.||20 21 To __"Store"__ the settings Exit from the Child Protection Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.22 23 [[br]]24 ----25 26 '''Coloured Button's Functions"27 28 The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the cchild protection settings menu29 please see below for more info on the functions of these buttons:.30 31 ||'''Red Button: (Menu Protect)''' ||pressing this button will bring up a list of menu items that a lock may be placed on to limit access to those areas, below is a list of all the menu items displayed in this menu.||32 33 * Soft Cam Pannel34 * Records and EPG35 * Media Center36 * Media Player37 * Extentions38 * System39 * Settigs40 * Information41 * Standby/ Poweroff42 * Main Menu43 * Media Center44 * GUI Restart45 * Power Off46 * Network Restart47 * A/V Settings48 * Adjust49 * Skin50 * Plugins51 * Records52 * EPG Search53 * Common Interface54 * Smart Card Reader55 * Flash Update Online56 * Child Protection57 * Service58 * Sat Finder59 * Epg Short View60 * Single Epg61 * Multi Epg62 * Graphic Epg63 * EPG Search64 * Records65 * Plugins66 * Change Feed67 * TPK Upgrade (Online)68 * TPK Install (Online)69 * TPK Tmp (tmp)70 * TPK Media (media)71 * TPK (remove72 * Channel Service...73 * Common Interface74 * Smart Card Reader75 * Network76 * Harddisk77 * VFDisplay78 * Fancontrol79 * System Update80 * Backup81 * Settings Backup Restore82 * Receiver Unlock83 * A/V Settings84 * Language85 * Timezone86 * Red Button87 * Blue Button88 * Plugin Button89 * Adjust90 * Skin Adjust91 * Screensaver adjust92 * Timeshift Settings93 * Record Path94 * EPG Settings95 * Child Protection96 * Restore Default Settings97 * Video Settings98 * Channel Edit99 * MediaDB Settings100 * Autostart Settings101 * Overclocking Settings102 * Save Settings103 * Service104 * Newsletter105 * About106 * Streaming107 * Atemio (hotline)108 * Titan Changelog109 * GIT Changelog110 * System Info111 * Log112 * System_Status113 * Free Space114 * kernel115 * Mounts116 * Network117 * Ram118 * System Infos119 * Cpu120 * Memory121 * MTD122 * Module123 * Devices124 * Swap125 * Top126 * Prozesslist127 * USB128 * Flashupdate (online)129 * Flashupdate (tmp)130 * USBupdate (online)131 * USBupdate (tmp)132 * Power off133 * Standby134 * Restart135 * GUI Restart136 * Power Off Timer137 * Tuner Configuration138 * Automatic Search139 * Manual Search140 * Manual Search Cable141 * Manual Search Terrestrial142 * Rotor Settings143 * Sat Config144 * Sat Finder145 * Blind scan settings146 * Formatt HDD147 * Filesystem Check148 * Configure149 * Time to Sleep150 * Adapter Settings151 * WLAN Settings -
wiki/pages/nl/Child-Safety
r40899 r43267 1 [[TranslatedPages]]2 >----3 >'''3.5.18.5 Child Safety''' [=#point3.5.18.5] ([wiki:Auto-Start-Settings#point3.5.18 Autostart Settings (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >6 >7 >[[Image(source:/wiki/Wiki-Pictures/NL/Autostart_Settings-child_safety.jpg)]][[br]]8 >9 Here you can adjust the lock settings on startup.10 11 [[br]]12 13 ||'''Parental:''' ||Enable lock on startup.||14 ||'''Pin:''' ||Select the pin number for the lock on startup.||15 16 To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.17 18 [[br]] -
wiki/pages/nl/Common-Interface
r40899 r43267 1 [[TranslatedPages]]2 >----3 >'''3.5.2 Common Interface''' [=#point3.5.2] ([wiki:Interface-Operation#point3.5 System (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >6 >7 >[[Image(source:/wiki/Wiki-Pictures/NL/system-Common_Interface.jpg)]][[BR]]8 >9 >here you can set up your installed cam devices.10 11 [[br]]12 13 Picture:14 ||'''Module Type:''' ||Set the module service type (multiple/ Single Service).||15 16 To __"Store"__ the settings Exit from the Common Interface Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.17 18 [[br]]19 ----20 21 '''Coloured Button's Functions"22 23 The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the Commom Interface menu.24 please see below for more info on the functions of these buttons:.25 26 ||'''Red Button: (Reset)''' ||This will reset the selected Common Interface Module.||27 ||'''Green Button: (Menu)''' ||This will Bring up the advanced Common Interface menu.||28 ||'''Yellow Button: (CAID)''' ||???.||29 ||'''Blue Button: (Channel)''' ||Select the channels the selected CA Module will Decode.||30 ||'''Menu Button: (Setting)''' ||This will show the settings for the selected CA Module.||31 32 -
wiki/pages/nl/Community
r40899 r43267 1 [[TranslatedPages]]2 ----3 '''14 Community''' [=#point14] ([wiki:English-Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 ----5 6 [[br]]7 8 The TitanNit project is supported 24 hours in the public forum.9 10 For help and support feel free to join us on our forum11 12 ||= '''[http://www.aaf-digital.info/forum/forum.php AAF Digital Forum]''' =||13 ||= [[Image(http://www.aaf-digital.info/images/logo.jpg,400,link=http://www.aaf-digital.info/forum/forum.php)]] =||14 15 [[br]] -
wiki/pages/nl/Configure
r40899 r43267 1 [[TranslatedPages]]2 >----3 >'''3.5.5.3 Hard Disk Configure''' [=#point3.5.5.3] ([wiki:Hard-Disk#point3.5.5 hard disk (Back)])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/NL/Configure.jpg)]][[br]]7 >8 Here you can configure your harddisk see below for more information.9 Note that you must enable ([wiki:Adjust#point3.6.7 Expertmode]) to show all available configure options in this display.10 [[br]]11 12 [[br]]13 14 ||'''Use as recordings-device''' ||Prepair the storage device for use as a recording medium.||15 ||'''Remove recordings-device''' ||disable the use of the storage device as a recording medium.||16 ||'''Use as plugins-device''' ||Prepair the storage device for use as a plugins medium.||17 ||'''Remove extentions-device''' ||disable the use of the storage device as a extentions medium.||18 ||'''Use as swap-device''' ||Prepair the storage device for use as a swap medium.||19 ||'''Remove swap-device''' ||disable the use of the storage device as a swap medium.||20 ||'''Use as backup-device''' ||Prepair the storage device for use as a backup medium.||21 ||'''Remove backup-device''' ||disable the use of the storage device as a backup medium.||22 23 24 25 26 To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.27 28 29 30 [[br]] -
wiki/pages/nl/Contact
r40899 r43267 1 [[TranslatedPages]]2 ----3 '''15 Contact''' [=#point15] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 ----5 6 Interested External Developers or testers can feel free to chat with us via Skype.7 • Skype Chat: "TitanNit Dev Chat"8 • Skype Contact: obiwan19769 10 [[br]]11 [[br]] -
wiki/pages/nl/Create-Default-Favorites
r40899 r43267 1 [[TranslatedPages]]2 >----3 >'''3.5.1.8 Create Default Favorites[=#point3.5.1.8] ([wiki:Channel-Service#point3.5.1 Channel-Service (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/NL/Create-Default-Favorites.jpg)]][[br]]7 >8 By selecting this option it will setup the default german favourites lists.9 10 Please note that selecting this button will remove all the user pre programmed in favourites.11 12 in future it may be able to set up favourite lists from the satellites/ providers programed into the tuner.13 14 15 To __"Store"__ the settings by pressing __"OK"__ or press __"Exit"__ to cancel changes.16 -
wiki/pages/nl/Create-Transponder-List
r40899 r43267 1 [[TranslatedPages]]2 >----3 >'''3.5.1.7 Create Transponder List''' [=#point3.5.1.7] ([wiki:Channel-Service#point3.5.1 Channel-Service (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/NL/Create-Transponder-List.jpg)]][[br]]7 >8 Here you can automatically set up transponders for various services from the TitanNit online repo this will save you from having to manually create these lists from your pc or from a satellite xml generator, this will greatly simpifly channel and tuner setup.9 10 please note that these lists may be out dated and not contain a complete list of transponders for every service.11 12 [[br]]13 14 ||'''Create Transponder (Sat) ''' ||Downloads a list of current transponders from the online repo for all available satellites services. ||15 ||'''Create Transponder (Cable) ''' ||Downloads a list of current transponders from the online repo for all available cable services. ||16 ||'''Create Transponder (Terrestrial) ''' ||Downloads a list of current transponders from the online repo for all available Terrestrial services. ||17 ||'''Create Transponder (All) ''' ||Downloads a list of current transponders from the online repo for all available services. ||18 19 Please note that selecting one of the above options will remove all the transponders from the current channel data and may remove any custom satellite configs and tuner settings.20 21 in future it may merge the current programmed in user assigned transponders.22 23 A rescan will need to be preformed after preforming an option be sure to make a backup before proforming this action to be safe.24 25 26 To __"Store"__ the settings by pressing __"OK"__ or press __"Exit"__ to cancel changes.27 -
wiki/pages/nl/DYNDNS-Settings
r40899 r43267 1 [[TranslatedPages]]2 >----3 >'''3.5.4.7 DYNDNS Settings''' [=#point3.5.4.7] ([wiki:Network#point3.5.4 network (Back])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/NL/DYNDNS-Settings.jpg)]][[br]]7 >8 Here you can setup your DYNDNS interface.9 10 [[br]]11 12 ||'''Start on Boot:''' ||Start the DYNDNS server on startup.||13 ||'''User:''' ||setup the username for DYNDNS.||14 ||'''Password:''' ||Set the password for DYNDNS.||15 ||'''DNS NAME:''' ||set the dns name.||16 ||'''DNS Syatem:''' ||???.||17 18 To __"Store"__ the settings Exit from the Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.19 20 [[br]]21 ----22 23 '''Coloured Button's Functions"24 25 The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the epg settings menu.26 please see below for more info on the functions of these buttons:.27 28 ||'''Text Button: (Keyboard)''' ||This will will bring up editor to edit a value or text string.||29 ||'''Green Button: (Start)''' ||Start the DYNDNS server.||30 ||'''Yellow Button: (Stop)''' ||Stop the DYNDNS server.|| || -
wiki/pages/nl/Default-Autostart
r40899 r43267 1 [[TranslatedPages]]2 >----3 >'''3.5.18.1 Default Autostart''' [=#point3.5.18.1] ([wiki:Auto-Start-Settings#point3.5.18 Autostart Settings (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >6 >7 >[[Image(source:/wiki/Wiki-Pictures/DE/Autostart_Settings-default_Autostart.jpg)]][[br]]8 >9 Here you can check and adjust the startup settings.10 11 [[br]]12 13 ||'''Bootstop:''' ||???.||14 ||'''Debug:''' ||Here you can set the debug mode and adjust the complexicity of the log output.||15 ||'''Show IP:''' ||Scan for a Media Highway version 2 EPG stream during EPG scan.||16 ||'''Updatelist:''' ||??.||17 18 To __"Store"__ the settings Exit from this Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.19 -
wiki/pages/nl/Development
r40899 r43267 1 [[TranslatedPages]]2 ----3 '''11 Development''' [=#point11] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 ----5 6 === Plugins Building ===7 8 '''Preparation'''9 10 In the current tdt git http://gitorious.org/open-duckbox-project-sh4 you can now build TitanNit plugins.11 I have installed 2 plugins that are intended to serve as an example. One can then download and unzip this locally and build your own plugins.12 13 With a fresh clone of the git14 15 {{{16 make yaud-enigma2-nightly17 }}}18 19 after it completes, then20 21 {{{22 make titanium-plugins23 }}}24 25 [[br]] -
wiki/pages/nl/Devices
r40899 r43267 1 [[TranslatedPages]]2 >----3 >'''3.7.8.6.5 Devices''' [=#point3.7.8.6.5] ([wiki:System-Infos#point3.7.8.6 System Infos (Back])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/NL/Devices.jpg)]][[br]]8 >9 Here you can view the detailed loaded devices info.10 11 [[br]]12 13 14 [[br]] -
wiki/pages/nl/Disclaimer
r40899 r43267 1 [[TranslatedPages]]2 ----3 '''17 Generic Disclaimer''' [=#point17] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 ----5 6 TitanNit is a Semi closed source setop box linux based operating system software. The services provided by AAF Digital including (including developer tools, resources, download areas, files, source code, product information, documentation, communication forums, bug tracker, wiki, internet, streaming, forum etc. all collectively called "services") that the TitanNit Project, its members, and websites provide are for the purpose of providing support to the community and aditional functionality from the original system software provided by the manufactures of the supported hardware.7 The services provided bt the AAF digital team is provided “as is”, "with all faults", and "as available" basis, without warranty of any kind, either express or implied. Your use of these services is at your own risk. TitanNit disclaims all warranties.8 9 TitanNit disclaims liability for any direct, indirect, incidental, special, consequential, exemplary, punitive or other damages, or lost profits, that may result directly or indirectly from the use of these services and any material that is downloaded or obtained through the use of these services.10 11 This includes, without limitation, any damage to computer systems, hardware or software, loss of data, or any other performance failures, any errors, bugs, viruses or other defects that result from, or are associated with the use of these services.12 13 None of the contributors, sponsors, administrators, or anyone else connected with TitanNit in any way whatsoever can be responsible for the appearance of any inaccurate or libelous information or for your use of the information contained in or linked from these services.14 15 AAF Digital reserve the right to to remove and add services as they see fit without warning.16 17 18 19 '''No contract, limited license'''20 21 22 Please make sure that you understand that these services is being provided freely, and that no kind of agreement or contract is implied between the owners or users of these services, the owners of the servers upon which it is housed, the individual contributors to these services, any project administrators, sysops or anyone else who is in any way connected with the project subject to your claims against them directly. You are being granted a limited license to copy or install anything from this site; it does not create or imply any contractual or extracontractual liability on any of it's agents, members, organizers or other users. Neither is anyone responsible should someone change, edit, modify or remove any information contained with in these services.23 24 25 26 '''Trademarks'''27 28 29 Any of the trademarks, service marks, collective marks, design rights or similar rights that are mentioned, used or cited in the services provided for TitanNit are the property of their respective owners. Their use in any "service" does not imply that you may use them for any other purpose other than for the same or a similar use as contemplated by the original authors concent.30 the AAF Digital team will make due effort to outline the services that are provided by other's and give them credit where aplicable.31 32 33 '''Information and Content'''34 35 36 Publication of information found in any of the services provided for TitanNit may be in violation of the laws of the country or jurisdiction from where you are viewing this information. The servers providing these services are located in different locations of the world and is maintained in reference to the protections afforded under local and federal law in respect to their location. Laws in your country or jurisdiction may not protect or allow the same kinds of speech or distribution. the AAF digital team does not encourage the violation of any laws; and cannot be responsible for any violations of such laws, should you link to the domain of the websites of these services or use, reproduce, or republish the information contained therein.37 38 39 '''Final Remarks'''40 41 42 Enjoy TitanNit and the other services provided by AAF Digital and thanks for selecting us!43 -
wiki/pages/nl/EPG-Search
r40899 r43267 1 [[TranslatedPages]]2 >----3 >'''3.1.4 EPG Search''' [=#point3.1.4] ([wiki:Interface-Operation#point3.1 Records and EPG(Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/NL/Epg_Search.jpg)]][[BR]]7 >8 EPG Search is where you can search the EPG title, discription genra for specific keywords to search for programs to set up Recordings.9 10 [[br]]11 12 '''Coloured and Extra Button's Functions"13 14 The __"Coloured and Extra Buttons"__ along the bottom of the display bring up additional menus and options with in the Search EPG menu.15 please see below for more info on the functions of these buttons:.16 17 ||'''Red Button: (Timer)''' ||This will bring up the recording timer menu to set up a timer.||18 ||'''Green Button: (Title)''' ||This will search the EPG title string for text you specify and bring up a list of matches where you may press the red button to set up a timer.||19 ||'''Yellow Button: (Discription)''' ||This will search the EPG Discription string for text you specify and bring up a list of matches where you may press the red button to set up a timer.||20 ||'''Blue Button: (All)''' ||This will search all EPG string for text you specify and bring up a list of matches where you may press the red button to set up a timer.||21 ||'''Menu (Genre):''' ||This will search the EPG Genre string for text you specify and bring up a list of matches where you may press the red button to set up a timer.||22 23 For information on setting up a timer Recording using the red button see ([WikiStart#point103.10.6 Records]) for more info. -
wiki/pages/nl/EPG-Settings
r40899 r43267 1 [[TranslatedPages]]2 >----3 >'''3.6.11 EPG Settings''' [=#point3.6.11] ([wiki:Interface-Operation#point3.6 Settings (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/NL/EPG_Settings.jpg)]][[BR]]8 >9 >Here you can change your epg settings.10 11 [[br]]12 13 14 ||'''EPG Path''' ||Set to any Path you want where the EPG File should be stored (on Receivers with little Memory it is strongly recommended to extend it by using a USB Pen-Drive or Harddisk)||15 ||'''How Many Days:''' ||The Number of Days in Advance of the EPG to store (I recommend no higher than 8 Days)||16 ||'''Delete EPG after read:''' ||Do you want the EPG file to be deleted after being read.||17 ||'''EPG Save Mode:''' ||When should the EPG Data be stored to the storage medium. Caution: Should you not use a Pen Drive or Harddisk for EPG Storage set to Never, as Receivers with little Memory on Board tend to crash due to Insufficient free space.||18 ||'''Show EPG Screen (EPG Button):''' ||Which EPG format should be shown on EPG Key-press on the Remote.||19 ||'''EPG Free Space (kb):''' ||Total of minimal Free Memory that should be kept on the medium where the epg is stored to aviod free space errors.||20 ||'''EPG List Mode:''' ||What Channels should be scanned in the background (Only for twin Receivers) for EPG (scan)(whitelist) (scanlist and whitelist) (deactivate (disable scan)).||21 ||'''EPG Scan Time:''' ||Here you can set the time of the automatic EPG scan. The Scan will be performed every Day at that set time. Should the Receiver be in Deep Stand-by it will "wake up" aprox. 5 Minutes before the scan is due to start.||22 ||'''EPG Button in EPG:''' ||Behavior of the EPG Button during EPG display.||23 ||'''Grafic EPG Zoom:''' ||Sets the zoom level of the EPG to show more or less of a time span of the shown programs.||24 ||'''Grafic EPG Picons:''' ||Set to yes to use picons or the alternative Picon sets in the infobar and EPG stored in /var/media/autofs/sda1/swapextensions/usr/local/share/titan/picons/ directory.||25 ||'''Delete EPG Before Scan:''' ||Should the EPG be deleted before a the timed scan.||26 ||'''After EPG Scan:''' ||Behavior after the EPG scan is completed EPG scan: Nothing (Stand-By) or Switch Off (Deep Stand-By).||27 ||'''MHW EPG:''' ||Scan for a Media Highway EPG stream during EPG scan.||28 ||'''MHW2 EPG:''' ||Scan for a Media Highway version 2 EPG stream during EPG scan.||29 ||'''OpenTV EPG:''' ||Scan for an OpenTV EPG stream during EPG scan.||30 31 To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.32 33 [[br]]34 ----35 36 '''Coloured Button's Functions"37 38 The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the epg settings menu.39 please see below for more info on the functions of these buttons:.40 41 ||'''Red Button: (EPG Reset)''' ||This will reset the saved epg removing all program data.||42 ||'''Green Button: (Edit)''' ||On a customisable item this will bring up editor to edit a value or text string.||43 ||'''Yellow Button: (Scanlist)''' ||Brings up the epg scan list and you may from there add aditional boquets to be scaned during an epg scan.||44 ||'''Blue Button: (log)''' ||This will show you the past scan log history for the epg.||45 -
wiki/pages/nl/EPG-Short-View
r40899 r43267 1 [[TranslatedPages]]2 >----3 >'''3.1.1 EPG Short View''' [=#point3.1.1] ([wiki:Interface-Operation#point3.1 Records and EPG(Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 5 >6 >7 >[[Image(source:/wiki/Wiki-Pictures/NL/EPG_Short_View.jpg)]][[BR]]8 >9 10 EPG Short View is a small easy to read horozontal epg of the current displayed channel including the infomation on the program you may scroll using the direction arrows to a future time.11 [[br]] -
wiki/pages/nl/External-Software
r40899 r43267 1 [[TranslatedPages]]2 ----3 '''9 External Software''' [=#point9] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 ----5 6 External Software is a collection of tools to supplement TitanNit.7 8 This is a list of applications that can be use with or for to manipulate or control your Receiver.9 [[br]]10 Below is a list of external applications please select a link below for more information.11 12 13 14 {{{#!div style="width: 1100px; margin: auto"15 {{{#!table style="border: none"16 {{{#!td align=center valign=top style="border: none; font-size: 115%"17 {{{#!div style="float: left"18 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/External-Software/TiMote.png,align=left,link=[wiki:External-Software-TiMote#point9.1 9.1 TiMote (Android)])]]19 }}}20 '''[wiki:External-Software-TiMote#point9.1 9.1 TiMote (Android)]'''[[br]]21 {{{#!div style="float: left22 Timote is an andriod application for streaming and control of TitanNit23 }}}24 }}}25 {{{#!td align=center valign=top style="border: none; font-size: 115%"26 {{{#!div style="float: left"27 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/External-Software/TiView.png,align=left,link=[wiki:External-Software-TiView#point9.2 9.2 TiView (PC)])]]28 }}}29 '''[wiki:External-Software-TiView#point9.2 9.2 TiView (PC)]'''[[br]]30 {{{#!div style="float: left31 TiView is an PC application for streaming and control of TitanNit32 }}}33 }}}34 {{{#!td align=center valign=top style="border: none; font-size: 115%"35 {{{#!div style="float: left"36 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/External-Software/SatChannelListEditor.png,align=left,link=[wiki:External-Software-SatChannelListEditor#point9.3 9.3 SatChannelListEditor])]]37 }}}38 '''[wiki:External-Software-SatChannelListEditor#point9.3 9.3 SatChannelListEditor]'''[[br]]39 {{{#!div style="float: left40 SatChannelListEditor is an PC application for manipulation of your TitanNit channel data.41 }}}42 }}}43 |----44 {{{#!td align=center valign=top style="border: none; font-size: 115%"45 {{{#!div style="float: left"46 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/External-Software/E2WebIFAPI.png,align=left,link=[wiki:External-Software-E2WebIfAPI#point9.4 9.4 E2WebIfAPI])]]47 }}}48 '''[wiki:External-Software-E2WebIfAPI#point9.4 9.4 E2WebIfAPI]'''[[br]]49 {{{#!div style="float: left50 E2WebIfAPI is an console application to support the dreambox xml web interface commands.51 }}}52 }}}53 {{{#!td align=center valign=top style="border: none; font-size: 115%"54 {{{#!div style="float: left"55 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/External-Software/TitanEditor.png,align=left,link=[wiki:External-Software-TitanEditor#point9.5 9.5 TitanEditor])]]56 }}}57 '''[wiki:External-Software-TitanEditor#point9.5 9.5 TitanEditor]'''[[br]]58 {{{#!div style="float: left59 TitanEditor is an PC application for manipulation of dreambox channel data to work on of your TitanNit Receiver.60 }}}61 }}}62 {{{#!td align=center valign=top style="border: none; font-size: 115%"63 {{{#!div style="float: left"64 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/External-Software/TitanNitLanguageEditor.png,align=left,link=[wiki:External-Software-TitanNitLanguageEditor#point9.6 9.6 TitanNitLanguageEditor])]]65 }}}66 '''[wiki:External-Software-TitanNitLanguageEditor#point9.6 9.6 TitanNitLanguageEditor]'''[[br]]67 {{{#!div style="float: left68 TitanLanguageEditor is an PC application for editing GUI language translations.69 }}}70 }}}71 }}}72 }}} -
wiki/pages/nl/External-Software-E2WebIfAPI
r40899 r43267 1 [[TranslatedPages]]2 '''9.4 E2WebIfAPI''' [=#point9.4] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])3 4 5 == Introduction ==6 Enigma2 Web Interface ( WebIf ) API was defined for Dreambox .7 It is a protocol that allows you to control a Dreambox via HTTP requests.8 9 Typical control tasks are :10 11 * Programming (timer) and playing back recordings12 * Live streaming (TV and radio)13 * EPG functions (display, search)14 * Remote control (Remote Control)15 16 You can find a good overview of the E2WebIFAPI in the [http://dream.reichholf.net/wiki/Enigma2:WebInterface DreamboxWIKI].17 18 == Motivation ==19 20 For TitanNit the Android App [wiki:External-Software-TiMote#point109.1 9.1 TiMote] was developed. Anybody with an Android Smart-Phone or Tablet with this software installed can control their receiver or watch TV on the Android device. Isn't that cool?21 22 But owners of an iOS-device (i-Phone or i-Pad) are unlucky as there is no iOS TitanNit compatable web client such as TiMote. You can control your receiver via http protocol (same as Web Interface) but you wont be able to use all advantages like tiMote on an Android Platform.23 24 On the other hand iOS and Android Apps already exist for Dreambox receivers. These Apps are based on the Enigma2 protocol. Couldn't one just use that App on iOS instead of developing a new App?25 26 == The solution ==27 TitanNit has its own protocol but is not compatible to the Enigma2 WebIf. Following a short analysis it was discovered that converting E2 requests to Titan didn't seem so difficult. Therefore, an E2 web server (e2webserv) was developed, which implements the Enigma2 WebIf. This server receives the E2 requests, delegates the calls to TitanNit web server and the responses is converted back into the XML format, which is expected from the E2 client.28 29 This way the TitanNit receiver is able to correspond to existing E2 - client software.30 31 32 == Requirements ==33 34 * The Web server must be enabled on the receiver35 * The E2webserv must be installed on the receiver36 37 == IOS Apps ==38 39 The following apps are installed on my iPad2:40 * dreaMote41 * DreaMote Lite42 * e2RemoteHD43 * Dreambox Live44 45 Should you not want to purchase any apps from the Apps-Store I can recommend dreaMote Lite .46 47 In addition to the app you need a player.48 49 I have tried the following players, which work well for me:50 * Good Player51 * BUZZ Player52 * OPlayerHD Lite53 * VLC Player54 55 VLC and OPlayerHD Lite are free.56 57 == XBMC ==58 59 If you are running the Media Center software [http://xbmc.org/ XBMC] or [http://xbmc4xbox.org.uk/ XBMC4XBOX], you can connect your Titan receiver via the Live-TV-Plugin VU+.60 XBMC runs on Windows PCs aswell as Linux and is also available for Raspberry Pi and the Xbox.61 62 == VLC ==63 Having installed the e2webserv you can enjoy Live-Streaming on your Windows or Linux PC using [http://www.videolan.org/vlc/ VLC] (no further software needed).64 65 You do not have to switch channels manually it all happens automatically. In order for this to take place you need an M3U playlist. You can easily generate the playlist by your Favourites and save to your PC. Having done so you only need to open the M3U list in VLC and select the desired channel.66 67 How do you export a particular favourites list into an M3U file?68 69 Enter the address in your Web browser.70 71 Example (favourite is "Polish"):72 73 [http://192.168.1.1:8080/web/services.m3u?bRef=Polish]74 75 Enter your receivers IP address and where names of Favourites have spaces within these spaces must be replaced with "%20".76 77 Example (favourite is "My TV" Receiver - IP: 192.168.0.10):78 79 [http://192.168.0.10:8080/web/services.m3u?bRef=Mein%20TV]80 81 Client Configuration == ==82 Please configure the E2-clientas accordingly:83 * IP address of the receiver84 * Port: 808085 * Streaming Port: 800186 87 Please note that SSL is not supported.88 89 Below you see an example configuration for dreaMote.90 91 [[Image(DreaMote.png,384px)]]92 93 == E2webserv.conf ==94 95 You must alter the server configuration manually. Using standard configured TitanNit no alterration on the e2webserv.conf should be neccessary.96 97 Should you have installed the plugin to Flash the configuration file '''e2webserv.conf''' lies in the directory '''/mnt/swapextensions/etc'''98 99 Here is the content:100 {{{101 # E2 web port102 port = 8080103 # E2 data port104 data port = 8001105 # Titan web port106 titanium- port = 80107 # Titan data port108 titan data port = 22222109 # Titan host (change it if e2webserv is not running locally on the receiver)110 titan host = 127.0.0.1111 # Automatic switching of channels112 # It is useful if you do not want manually switch a channel on receiver with a single tuner.113 # If it is set to false and you have a single tuner you can stream the only channels located114 # On the same transponder as the current channel active on the receiver .115 Autozap = true116 # Log output file117 logFile = /tmp/e2webserv.log118 # Maximum log file size in KB. Set it to 0 (default 10KB) to disable logging (maximum allowed value is 1024).119 # When the file limit is reached a backup of the current file is created .120 # It Means maximally 2 x MaxLogSize KB will be used.121 MaxLogSize = 10122 # Thread pool size (1 through 8)123 threadpool = 2124 # Directory where the transponder and bouquet files are located.125 # You do not need to Specify it, it will be Automatically Discovered .126 # But if you you start e2webserv not on the receiver (but eg on your Linux server or Windows computer) then you127 # Shoulderstand copy the settings (channel, transponder, provider and all bouquets file) and here Specify the location on the local computer .128 titanDir = /mnt/settings129 }}}130 131 == Links ==132 133 * Enigma2 Web API in [http://www.aaf-digital.info/forum/showthread.php?90948-Enigma2-Web-API-f % FCr - TitanNit AAF Forum]134 * Sources on [https://github.com/gswiatek/e2api4titan GitHub]135 [[br]]136 [[br]] -
wiki/pages/nl/External-Software-SatChannelListEditor
r40899 r43267 1 [[TranslatedPages]]2 '''9.3 SatChannelListEditor''' [=#point9.3] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])3 4 This manual applies to version 5.4 of SatChannelListEditor (SCLE). In future releases,[[br]]5 possibly new features will be added, making the screen shots of this program obsolete.6 7 == Requirements ==8 SCLE has been programmed for the runtime environment " Microsoft. NET Framework ".[[br]]9 Currently .NET Framework version 2.0 or higher is required.10 11 ( also take a look at [http://en.wikipedia.org/wiki/.NET_Framework Wikipedia article . NET Framework] )12 13 == Windows ==14 * In Windows XP .NET Framework version 2.0, 3.0 or 3.5 must be installed.[[br]]15 (3.0 and 3.5 are extended versions include version 2.0)16 * For Windows Vista and Windows 7 the .NET Framework librarys are implemented[[br]]17 in the operating system and do not need to be installed seperately.18 * In Windows 8 .NET Framework 3.5 must be installed. As Windows 8 by default,[[br]]19 only includes .NET framework 4.5, which is not compatible with SCLE20 == Linux ==21 In Linux, the Mono framework is required (see [http://en.wikipedia.org/wiki/Mono_(software)Wikipedia article about Mono project]) .22 [[BR]] You may have to install WinForms libraries manually with "apt -get install libmono- winforms * "23 [[BR]] You may then run SCLE from the command line with the command "mono SatChannelListEditor.exe ".24 25 == Mac OS ==26 In Mac OS , just like Linux, the Mono-Framework is required to to run SCLE.27 28 == The first startup ==29 After the first startup of SCLE the language is set to English and the receiver[[br]]30 model " UFS -821 " is selected. You now have to set the language and your[[br]]31 Receiver model to suite your receiver.32 33 Select the receiver and its System you like to manage.34 35 == Setting the receiver model and type of operating system ==36 Select the menu under " Options ", select " Settings" :37 38 [[Image(source:/wiki/Wiki-Pictures/NL/SCLE/3.png)]]39 40 Select Titan in the window that appears as the receiver you wish to connect to:41 42 [[Image(source:/wiki/Wiki-Pictures/NL/SCLE/4.png)]]43 44 After selecting the reciever type under the option " Titan " set the IP address of your Receiver, before[[br]]45 you close the window confirm the settings by clicking the OK button.[[br]]46 The other settings on this page should not be changed.47 48 [[Image(source:/wiki/Wiki-Pictures/NL/SCLE/5.png)]]49 50 == Download and upload the channel list ==51 52 After the Receiver model and the IP address have been set, you can fetch the channel[[br]]53 list from your Receiver (Download) and after processing send it back to the Receiver (upload).54 [[BR]] Use the Buttons in the Menubar of SCLE or in the Drop-down Menu:55 56 [[Image(source:/wiki/Wiki-Pictures/NL/SCLE/6.png)]]57 58 [[Image(source:/wiki/Wiki-Pictures/NL/SCLE/7.png)]]59 60 When you start an upload or download the program will automatically change to[[br]]61 the message window where status messages are displayed for file transfer.62 63 == Edit the channel list ==64 65 == Favourites ==66 67 All TV and Radio channels are displayed in the tab "TV" and "Radio" in the main window[[br]]68 of SCLE. Normally there are several hundreds or thousands of channels in this list.69 [[BR]] To simplify navigation on your Receiver you may add the channels to more than one Favourites list.[[br]]70 The Favourites also determine the channel number for easier and direct access with your remote control.71 [[BR]] Create new favourites by clicking the right mouse button within the tree of favourites:72 73 [[Image(source:/wiki/Wiki-Pictures/NL/SCLE/8.png)]]74 75 After creating the new Favourites entry assign the desired Name:76 77 [[Image(source:/wiki/Wiki-Pictures/NL/SCLE/9.png)]]78 79 You may now add channels to your favourites by drag & drop of the channels[[br]]80 onto the Favourites entry or by clicking the right mouse button on the desired channel[[br]]81 and selecting Add to Favourites and selecting the Favourites Entry from the drop-down-menu:82 83 [[Image(source:/wiki/Wiki-Pictures/NL/SCLE/10.png)]]84 85 Once a channel has been added to the favourites, a channel number is assigned.[[br]]86 The first channel in the first favourites is channel number 1:87 88 [[Image(source:/wiki/Wiki-Pictures/NL/SCLE/11.png)]]89 90 When a channel is assigned to more than one favourites list, it additionally[[br]]91 obtains further channel numbers:92 93 [[Image(source:/wiki/Wiki-Pictures/NL/SCLE/12.png)]]94 95 === EPG favourite "EPG scan " ===96 97 For TV channels there is a special favourite called "EPG scan".[[br]]98 Copy all channels you want to be included for the timed EPG scan, all channels in this list[[br]]99 will have their epg automatically scaned.100 101 [[Image(source:/wiki/Wiki-Pictures/NL/SCLE/13.png)]]102 103 === Satellite ===104 Creating and Editing Satellite entrys105 Switch to the "Satellite" tab. After clicking the right mouse button the[[br]]106 drop-down-menu is displayed, where you can create a new Satellite or edit an existing one.[[br]]107 Double - clicking on an existing Satellite also opens this for editing.108 109 [[Image(source:/wiki/Wiki-Pictures/NL/SCLE/14.png)]]110 111 [[Image(source:/wiki/Wiki-Pictures/NL/SCLE/15.png)]]112 113 === Creating and Editing Transponders ===114 115 Switch to the "Transponder" tab. After clicking the right mouse button the drop-down-menu[[br]]116 is displayed, where you can create a new Transponder or edit an existing one.[[br]]117 Double - clicking on an existing Transponder also opens this for editing.118 119 [[Image(source:/wiki/Wiki-Pictures/NL/SCLE/16.png)]]120 121 [[Image(source:/wiki/Wiki-Pictures/NL/SCLE/17.png)]]122 123 === Creating and Editing Channels ===124 Switch to the tab "TV" or "Radio". After clicking the right mouse button the drop-down-menu[[br]]125 is displayed, where you can create a new channel or edit an existing one.[[br]]126 Double - clicking on an existing channel also opens this for editing.127 128 [[Image(source:/wiki/Wiki-Pictures/NL/SCLE/18.png)]]129 130 [[Image(source:/wiki/Wiki-Pictures/NL/SCLE/19.png)]]131 132 === Using receiver profiles ===133 134 If you have more than one Receiver, it is advisable to work with profiles.[[br]]135 Go to the settings and enable the checkbox "Use Receiver Profiles":136 137 [[Image(source:/wiki/Wiki-Pictures/NL/SCLE/20.png)]]138 139 Enter a name for the profile, and click the "Save" button.[[br]]140 The profile will be created with the current settings specified under the "Titan" tab.141 [[BR]] To create a profile for a second titan receiver, switch to the "Titan" tab,[[br]]142 enter the IP address of the second receiver, switch back to the "General" tab,[[br]]143 enter a new profile name and click on "Save" once again.144 145 When you close the settings window by clicking the -OK-button- You will now[[br]]146 discover the new selection menu where you may choose your Receiver profile.147 148 [[Image(source:/wiki/Wiki-Pictures/NL/SCLE/21.png)]] -
wiki/pages/nl/External-Software-TiMote
r40899 r43267 1 [[TranslatedPages]]2 ----3 '''9.1 TiMote''' [=#point9.1] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 ----5 6 [[br]]7 8 Timote is a universal remote control for Linux-based receivers.9 Currently (Atemio) TitanNit, Enigma2 and Neutrino are supported.10 please note that screen shots were taken from TiMote version xxx future versions of TiMote could make these screenshots invalid.11 12 Features:13 - Bouquets / Favorites14 - Show EPG15 - EPG search (*)16 - Show the current station17 - View recordings, stream and delete (*)18 - Create, edit and delete timer19 - Satfinder (*)20 - Power Control21 - Virtual Remote22 - News23 (*) Only Titannit/E224 25 To stream an appropriate player, for example, MX Player, VPlayer or BSPlayer (lite) need to be installed.26 If the app crashes, please activate the "send error report automatically" in the Settings. you can27 thereby help improve the software and make troubleshooting easier crucial to the developer.28 Comments, questions, suggestions or requests? Write me an email or post a comment on the app homepage!29 appear30 31 [[br]]32 33 [[Image(http://www.android.com/images/brand/get_it_on_play_logo_large.png)]]34 [[br]]35 [https://play.google.com/store/apps/details?id=eu.azato.timote PlayStore]36 37 [[br]]38 When you open up Timote You are presented with the main interface along the top of the display the radio buttons are used as the menu of Timote [[br]]39 See below for more information.40 41 '''Main''' [[br]]42 [[Image(source:/wiki/Wiki-Pictures/NL/TiMote/Main.png)]]43 44 Main contains a list of the main functions of timote:45 46 ||'''([wiki:External-Software-TiMote-TV#point0 TV]) ''' ||This will bring up a list of Boquets on the reciever).||47 ||'''([wiki:External-Software-TiMote-On-air#point0 On-air]) ''' ||This will Bring up the information of the TV channel currently displaying on the Reciever||48 ||'''([wiki:External-Software-TiMote-Movies#point0 Movies]) ''' ||This will bring up the Movielist's stored on the reciever).||49 ||'''([wiki:External-Software-TiMote-Timer#point0 Timer]) ''' ||This will bring up a list of the current timer recordings on the reciever).||50 ||'''([wiki:External-Software-TiMote-EPG-Search#point0 EPG-Search]) ''' ||This will bring up a a search page to search the EPG for a specific keyword).||51 52 [[br]]53 54 '''Misc''' [[br]]55 [[Image(source:/wiki/Wiki-Pictures/NL/TiMote/Misc.png)]]56 57 Misc contains a list of other functions of TiMote:58 59 ||'''([wiki:External-Software-TiMote-Signal-Finder#point0 Signal-Finder]) ''' ||This will bring up the signal info's of the current displayed channel.||60 ||'''([wiki:External-Software-TiMote-Screenshot#point9.1.1 Screenshot]) ''' ||This will take a screen shot of the TV Display||61 ||'''([wiki:External-Software-TiMote-Remote#point9.1.2 Remote]) ''' ||This will bring up the on screen remote).||62 ||'''([wiki:External-Software-TiMote-Message#point9.1.3 Message]) ''' ||This can be used to send messages to the TV display).||63 ||'''([wiki:External-Software-TiMote-Power-Menu#point9.1.4 Power Menu]) ''' ||This will bring up the power control menu64 ||'''([wiki:External-Software-TiMote-RGui#point9.1.5 RGui]) ''' ||This will start the RGui engine||65 ||'''([wiki:External-Software-TiMote-LCD-Mode#point9.1.6 LCD Mode]) ''' ||???||66 ||'''([wiki:External-Software-TiMote-Power-About#point09.1.7 Power About]) ''' ||This will bring up information on the developers of TiMote).||67 68 '''Profiles''' [[br]]69 [[Image(source:/wiki/Wiki-Pictures/NL/TiMote/Profile.png)]]70 71 Profiles is a list of receiver profiles with the ability to select and control multiple receivers.72 you may create a new profile using the add button at the top of the display.73 74 75 ----76 Temp data to move to Individual pages77 78 79 [[Image(source:/wiki/Wiki-Pictures/NL/TiMote/Stream.png)]]80 81 [[Image(source:/wiki/Wiki-Pictures/NL/TiMote/Boquet.png)]]82 83 84 -
wiki/pages/nl/External-Software-TiView
r40899 r43267 1 [[TranslatedPages]]2 ----3 '''9.2 TiView''' [=#point9.2] ([wiki:English-Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 ----5 TiView is a Windows 32bit application, that will run on a Windows 32/64bit system.[[br]]6 The Tool uses the HTTP-RAW-Api of TitanNit.[[br]]7 [[br]]8 ''Highlights of TiView''9 10 - *Output of the TV-Screen on your PC11 - *Watch recordings on your PC12 - *PiP function for 2 simultaneous TV-Stream or recording viewing on your PC13 - *Proxy function for external access from a remote TiView and streaming a recoded stream14 - Management of timers for recordings15 - Infobar with progress bar for the actual program16 - Picon-view in the Infobar(Enabled by adding the picons into the folder /picons in TiView)17 - Channel EPG18 - Multi EPG19 - Grafical Multi EPG20 - EPG Search21 - Overview of recordings22 - Manage profiles should one have more than one Receiver23 - Signal-Monitor24 - Send Messages to your Receiver25 - OSD-Screenshot26 '''*For Playback on your PC you need a compatable media player the 32bit version 2.x of VLC Player .'''[[br]]27 (Alternativly you can copy libvlc.dll, libvlccore.dll and the Plugins folder from VLC into the TiView folder) -
wiki/pages/nl/External-Software-TitanEditor
r40899 r43267 1 [[TranslatedPages]]2 '''9.5 TitanEditor''' [=#point19.5] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])3 4 Titan editor is a simple channel list editor that is able to convert enigma channel data to be able to operate[[br]]5 on a titan based receiver. It is also able to convert the filename from enigma 2 picons to the titan format.6 7 This software is still beta status but the basic functions are working, there has been posts noted on the AAF Forum that[[br]]8 converting picons in some instances comit an unhandled exception error causing the program to exit.9 10 - convert E2 channel list's incl. bouquets (this will not work 100% for some channels)11 - edit/delete and add Titan channels12 - convert E2 picons to Titan picons13 - manage bouquets14 15 The current version of TitanEditor is version 0.15 and it may be downloaded from here [http://www.aaf-digital.info/forum/showthread.php?78014-TitanEditor-V0-15&p=802005&viewfull=1#post802005 titanEditor]16 17 -
wiki/pages/nl/External-Software-TitanMote
r40899 r43267 1 [[TranslatedPages]]2 ----3 '''9.1 TitanMote''' [=#point9.7] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 ----5 6 [[br]]7 8 Titanmote is a universal remote control for Linux-based receivers.9 Currently there is a little information we can provide reguarding this from the developer jagabongo.10 11 ''Words from the developer:''12 ----13 I'm currently working on an iOS app for TitanNit . For this I would need a few beta testers .14 15 The app will cost money later when development is finished and will be able to be purchased from the store, I will not releace it free because I have specially bought for this purpose a developer account and will take many hours of development, I also do not want the app to feature advertising.16 17 requirements:18 - IPhone or iPad with iOS > = 7.019 - A bit of technical understanding20 - Lust for testing21 22 A few recent screenshots :23 https://www.dropbox.com/sh/armi0c3q72i350h/vm3szZDzvK24 25 26 So in Version 1 I should be able to:27 28 - Browse by bouquets / channel lists + See Epg info and switch Channels.29 - Add timers on an event with the epg data.30 - List all timer31 - Delete Timer32 - easy remote copy with touch buttons33 - 2 profiles34 - Everywhere pull to refresh .35 - [ EDIT] Forgot , it will be multilingual or , DE, FR, IT and rest English. But languages are all relatively retrofitted without hazzle36 37 Future features:38 39 - User: Password WebIf Auth . ( hopefully not often used)40 41 - Https support. ( Was I already am going to test with self-signed stuff but totally in the pants ... )42 43 - The stream to an iOS device is just not as easy as on Android that is why they first moved to the rear.44 45 46 BETA testing runs like this:47 48 * 1 You send with your UUID ( google iOS Device UUID to find out )49 50 * 2 Your you created an account at https://build.phonegap.com ( Free is sufficient).51 52 * 3 You share me with your UUID and email phonegap.build accounts.53 54 When that's done you can you log on your mobile Safari in build.phonegap.com and always install it there through the browser to the latest build. (OTA Installation).55 56 This is perfectly legal and possible even without jailbreak.57 58 59 if you are intreseed in becomming a better tester please leave a message in the [[http://www.aaf-digital.info/forum/showthread.php?100699-iOS-TitanNit-iOS-App-!-titanMote-!-Tester-gesucht!&p=974748#post974748 | forum]]. -
wiki/pages/nl/External-Software-TitanNitLanguageEditor
r40899 r43267 1 [[TranslatedPages]]2 ----3 '''9.6 TitanNit Language Editor''' [=#point9.6] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 ----5 6 The TitanNit Language Editor tool is used to provide translations files for devs to implement translations into the TitanNit gui.7 8 === Made by Karlo ===9 10 German and English languages have been made and have been merged into svn.11 To support future languages you can use this program to download the language base files from the svn for conversion it supports UTF-8 so special12 chracters from various languages can be implemented.13 14 Please check the [[http://www.aaf-digital.info/forum/showthread.php?98565-TitanNitLanguageEditor forum Link | main thread]] for the latest version, or the [#point9.6.7 Changelog]:15 16 17 18 This program requires microsoft visual basic runtime files to operate.19 20 Once you have made a Translation you may upload the translation po files to the aaf forum for implementation into TitanNit.21 22 If you think you can help with a translation please do so at the end of this page there is information on ([#point9.6.5 Submission]).23 24 25 [[br]]26 27 ----28 '''Features''' ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])29 ----30 31 * load po file from svn __"File/ Open Source (svn)"__32 * Import po file from svn or local as source __"File/ Import Titan.po"__33 * open local file as target__"File/ Open target (local)"__34 * save target file __"File/ Save Target"__35 * save target file as titan.po __"File/ Save titan.po"__36 * export msg string for external use __"File/ Export msgstr as Titan.po"__37 * Build reciever translation file __"File/ Build Titan.mo"__38 * export sourcefile to target __"Edit/ target.po -> target"__39 * view source target differences __"Edit/ diff target - titan.po"__40 41 [[br]]42 43 ----44 '''Functions''' ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])45 ----46 47 ''Select an item to view more info:''48 49 * ([#point9.6.1 Loading a translation from svn])50 * ([#point9.6.2 Loading a Translation from a local directory])51 * ([#point9.6.3 Import Translation from svn or local (Source/ Target Mode)])52 * ([#point9.6.4 Edit Translation])53 * ([#point9.6.5 Submission])54 * ([#point9.6.6 Local Testing])55 56 57 58 ----59 '''Loading a translation from svn''' [=#point9.6.1] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])60 ----61 62 To load a translation from the server SVN repo select the translation file from the menu: [[br]]63 64 [[Image(source:/wiki/Wiki-Pictures/NL/TLE/open_server.jpg)]] [[br]]65 66 it will then start downloading from the internet.[[br]]67 68 [[Image(source:/wiki/Wiki-Pictures/NL/TLE/loading_server.jpg)]] [[br]]69 70 [[br]]71 ([#point9.6 Top of Page])72 [[br]]73 74 ----75 '''Loading a Translation from a local directory''' [=#point9.6.2] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])76 ----77 78 To load a translation from the local directory select the translation file from the menu: [[br]]79 80 [[Image(source:/wiki/Wiki-Pictures/NL/TLE/open_local.jpg)]] [[br]]81 82 [[br]]83 ([#point9.6 Top of Page])84 [[br]]85 86 ----87 '''Import Translation from svn or local (Source/ Target Mode)'''[=#point9.6.3] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])88 ----89 90 To import a translation from svn or the local directory select the translation file from the menu: [[br]]91 Note: for this to work a source file must be loaded first [[br]]92 93 [[Image(source:/wiki/Wiki-Pictures/NL/TLE/import_file.jpg)]] [[br]]94 95 [[br]]96 97 you will then be dispalyed with this view to view the two po files along side each other:98 99 [[Image(source:/wiki/Wiki-Pictures/NL/TLE/import_list_view.jpg)]] [[br]]100 101 [[br]]102 103 you can then select __"Edit/ diff target - titan.po"__ to view the source and target differences.104 105 [[Image(source:/wiki/Wiki-Pictures/NL/TLE/diff_target.jpg)]] [[br]]106 107 [[br]]108 109 you can also automatically merge the source files to the target file by selecting __"Edit/ target.po -> target"__110 111 [[br]]112 ([#point9.6 Top of Page])113 [[br]]114 115 ----116 '''Edit Translation''' [=#point9.6.4] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])117 ----118 119 120 Now that it is loaded you may edit the msgid strings to suit your language and upload to the aaf forum.121 you may use the buttons on the lower taskbar to search for strings you wish to edit.[[br]]122 123 [[Image(source:/wiki/Wiki-Pictures/NL/TLE/edit.jpg)]]124 125 [[br]]126 ([#point9.6 Top of Page])127 [[br]]128 129 ----130 '''Submission'''[=#point9.6.5] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])131 ----132 133 If you could submit your completed translation file into the thread below for comitting by the devs into svn.134 135 please note that some translations may no be able to be imported into some receivers due to memory constarints.136 137 [http://www.aaf-digital.info/forum/showthread.php?98565-TitanNitLanguageEditor forum Link]138 139 [[br]]140 ([#point9.6 Top of Page])141 [[br]]142 143 ----144 '''Local Testing''' [=#point9.6.6] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])145 ----146 147 If you wish to install your modified language files into your reciever for testing you can so by exporting you file an a titan.mo file you can do this by selecting __"File/ Build Titan.mo"__ for this to work you need to install some aditional components in to the program directory.148 149 To do this create a folder in the program directory called __"gettext"__ and extract the below files into that directory:150 151 152 [http://ftp.informatik.rwth-aachen.de/ftp/pub/gnu/gettext/gettext-runtime-0.13.1.bin.woe32.zip gettext-runtime] [[br]]153 [http://ftp.informatik.rwth-aachen.de/ftp/pub/gnu/libiconv/libiconv-1.9.1.bin.woe32.zip libiconv] [[br]]154 [http://ftp.informatik.rwth-aachen.de/ftp/pub/gnu/gettext/gettext-tools-0.13.1.bin.woe32.zip gettext-tools] [[br]]155 156 Once you have exported your titan.mo file you may ftp or manually copy it onto your Receiver to test it.157 158 The file needs to go into the directory and a reboot neede to be proformed afterwards: '''/var/usr/local/share/titan/po/__??__/LC_MESSAGES/titan.mo)''' where __??__ is the language file you are editing.159 160 ''Note: if you have trouble exporting the translation to a mo file place the program directory on the root of your harddisk it can some times fail if the program it too deep in the file system''161 162 [[br]]163 ([#point9.6 Top of Page])164 [[br]]165 166 ----167 '''Change log''' [=#point9.6.7] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])168 ----169 170 171 172 Version 0.7 :173 * Loading and saving is now Uniformly in UTF- 8! Now special characters can be used from other languages.174 175 Version 0.8 :176 177 * minor changes178 * 'Build titan.mo ' for more infomation see ([#point9.6.6 Local Testing])179 180 Version 0.8.1 :181 * 1 Column now displays the line number of the msgid182 * 'Build titan.mo ' - in case of error in a makeMo.cmd Prog -Dir is created at the (click ) is probably better to see what 's going on183 * 'Edit / show only diff ' - same entries appear at msgid <> titan.po from184 185 Version 0.8.2 :186 * Fixed tooltip error187 188 Version 0.9.0 :189 * Fixed Error 13 - Thanks to Channel beta-testing190 * 'Import 2 po file ' to load an alternate po -files191 * ' titan.po -> Target' copied now empty fields Double entry copied by msgid192 193 version 0.9.1 :194 * svn version is displayed and saved as ' .... po.55555.svn '195 * thus can also be compared with an old ( stored ) version196 197 [[br]]198 ([#point9.6 Top of Page])199 [[br]] -
wiki/pages/nl/File-Browser
r40899 r43267 1 [[TranslatedPages]]2 >----3 >'''3.2.5 File Browser''' [=#point3.2.5] ([wiki:Interface-Operation#point3.2 Media Center (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(http://sbnc.dyndns.tv/trac/export/26462/wiki/Wiki-Pictures/NL/file_manager.jpg)]][[br]]8 >9 >Here you can browse files from any source available from your decoder (local or network)10 > you may do such things as copy delete and move.11 12 13 [[br]] -
wiki/pages/nl/Filesystem-Check
r40899 r43267 1 [[TranslatedPages]]2 >----3 >'''3.5.5.1 File system Check''' [=#point3.5.5.1] ([WikiStart#point3.5 System (Back])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/NL/Filesystem-Check.jpg)]][[br]]7 >8 Here you can format your harddisk select an item and follow the onscreen prompts.9 10 [[br]]11 12 13 14 15 [[BR]] -
wiki/pages/nl/Format-Hdd
r40899 r43267 1 [[TranslatedPages]]2 >----3 >'''3.5.5 Hard Disk''' [=#point3.5.5] ([wiki:Interface-Operation#point3.5 system (Back)])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/NL/Format-Hdd.jpg)]][[br]]7 >8 Here you can format your harddisk select an item and follow the onscreen prompts.9 Note that you must enable ([wiki:Adjust#point3.6.7 Expertmode]) to show all available format options in this display.10 11 [[br]]12 13 14 15 16 [[BR]] -
wiki/pages/nl/Free-Space
r40899 r43267 1 [[TranslatedPages]]2 >----3 >'''3.7.8.2 Free Space''' [=#point3.7.8.2] ([wiki:System-Info#point3.7.8 System Info (Back])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/NL/Free-Space.jpg)]][[br]]7 >8 Here you can view the free space of all the file systems acessable from the decoder.9 10 [[br]]11 12 13 [[br]] -
wiki/pages/nl/Functions
r40899 r43267 1 [[TranslatedPages]]2 3 ----4 '''2 Interface Elements''' [=#point2] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])5 ----6 [[br]]7 This section will show the functions and controls of the various elements in the gui within TitanNit and discriptions to the various8 items and their functions aswell as helpfull information and tricks to get the most possible experience with your Receiver.9 10 Note: pictures in this area only apply to the default skin used in Titan.11 If you do not see a specific menu item on the display please select the default skin from the menu as follows all the functions displayed below are implemented in all skins but some elements may be omitted from the display in some skins:12 13 Press the __"Menu"__ button and select __"Settings"__ scroll down to __"Skin"__ and select the __"Default"__ Skin from the menu.14 The decoder will then reboot with the new selected __Default__ skin.15 16 ----17 {{{#!div style="width: 1100px; margin: auto"18 {{{#!table style="border: none"19 {{{#!td align=center valign=top style="border: none; font-size: 115%"20 {{{#!div style="float: left"21 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/Infobar.png,align=left,link=[#point2.1])]]22 }}}23 '''[#point2.1 infobar]'''[[br]]24 {{{#!div style="float: left25 Default display when pressing the __Info__ button while watching TV.26 }}}27 }}}28 {{{#!td align=center valign=top style="border: none; font-size: 115%"29 {{{#!div style="float: left"30 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/playback_infobar.png,align=left,link=[wiki:History#point2.2 TitanNit Info])]]31 }}}32 '''[#point2.2 Playback infobar]'''[[br]]33 {{{#!div style="float: left34 Default display when pressing the __Info__ button while watching A recording or Media using the default player.35 }}}36 }}}37 {{{#!td align=center valign=top style="border: none; font-size: 115%"38 {{{#!div style="float: left"39 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/AudioTracks_infobar.png,align=left,link=[#point2.3])]]40 }}}41 '''[#point2.3 Audiotracks infobar]'''[[br]]42 {{{#!div style="float: left43 Default display when pressing the __Audio__ button while watching TV, A recording or Media using the default player.44 }}}45 }}}46 |----47 {{{#!td align=center valign=top style="border: none; font-size: 115%"48 {{{#!div style="float: left"49 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/Channel History.png,align=left,link=[#point2.4])]]50 }}}51 '''[#point2.4 Channel History]'''[[br]]52 {{{#!div style="float: left53 Default display when pressing the __Recall__ button while watching A recording or Media using the default player.54 }}}55 }}}56 {{{#!td align=center valign=top style="border: none; font-size: 115%"57 {{{#!div style="float: left"58 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/Sleep_Timer.png,align=left,link=[#point2.5])]]59 }}}60 '''[#point2.5 Sleep Timer]'''[[br]]61 {{{#!div style="float: left62 Default display when pressing the __Sleep_ button while the decoder is in operation.63 }}}64 }}}65 {{{#!td align=center valign=top style="border: none; font-size: 115%"66 {{{#!div style="float: left"67 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/Subtitle.png,align=left,link=[#point2.6])]]68 }}}69 '''[#point2.6 Subtitle]'''[[br]]70 {{{#!div style="float: left71 Default display when pressing the __Subtitle__ button while watching TV, A recording or Media using the default player.72 }}}73 }}}74 |----75 {{{#!td align=center valign=top style="border: none; font-size: 115%"76 {{{#!div style="float: left"77 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/EPG.png,align=left,link=[#point2.7])]]78 }}}79 '''[#point2.7 EPG]'''[[br]]80 {{{#!div style="float: left81 Default display when pressing the __EPG__ button while watching TV.82 }}}83 }}}84 {{{#!td align=center valign=top style="border: none; font-size: 115%"85 {{{#!div style="float: left"86 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/program_info.png,align=left,link=[#point2.8])]]87 }}}88 '''[#point2.8 Program Info]'''[[br]]89 {{{#!div style="float: left90 Default display when pressing the __Info__ button while viewing the EPG.91 }}}92 }}}93 {{{#!td align=center valign=top style="border: none; font-size: 115%"94 {{{#!div style="float: left"95 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/player.png,align=left,link=[#point2.9])]]96 }}}97 '''[#point2.9 Player]'''[[br]]98 {{{#!div style="float: left99 Default display when pressing the __Play_ button.100 }}}101 }}}102 |----103 {{{#!td align=center valign=top style="border: none; font-size: 115%"104 {{{#!div style="float: left"105 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/favourite.png,align=left,link=[#point2.10])]]106 }}}107 '''[#point2.10 Favourite]'''[[br]]108 {{{#!div style="float: left109 Default display when pressing the __FAV__ button.110 }}}111 }}}112 {{{#!td align=center valign=top style="border: none; font-size: 115%"113 {{{#!div style="float: left"114 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Functions/record.png,align=left,link=[#point2.11])]]115 }}}116 '''[#point2.11 Record]'''[[br]]117 {{{#!div style="float: left118 Default display when pressing the __REC__ button while watching TV.119 }}}120 }}}121 122 123 }}}124 }}}125 ----126 [[BR]]127 128 129 130 131 132 '''Infobar''' [=#point2.1] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])133 134 [[Image(source:/wiki/Wiki-Pictures/NL/Info-OSD.jpg)]] [[br]]135 This overlay display shows when you press the __"INFO"__ button when viewing a tv channel. [[br]]136 It shows actual and next program information137 138 [[br]]139 '''Playback Infobar''' [=#point2.2] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])140 141 [[Image(source:/wiki/Wiki-Pictures/NL/Playback-OSD.jpg)]] [[br]]142 This overlay shows when you press the __"INFO"__ button when playing back a program or time shift is in operation. [[br]]143 It shows a list of the available buttons to use when in playbac/timeshift to do various things.144 145 [[br]]146 '''Audio Track''' [=#point2.3] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])147 148 [[Image(source:/wiki/Wiki-Pictures/NL/Audio-OSD.jpg)]] [[br]]149 This overlay shows when you press the __"AUDIO""__ button when viewing a tv channel. [[br]]150 It allows you to adjust the audio track on the current stream if an alternative audio source exists.151 152 [[br]]153 '''History''' [=#point2.4] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])154 155 [[Image(source:/wiki/Wiki-Pictures/NL/History-OSD.jpg)]] [[br]]156 This overlay shows when you press the __"RECALL"__ button when viewing a tv channel. [[br]]157 It allows you to recall the past viewed channels for fast zapping between them.158 159 [[br]]160 '''Sleep Timer''' [=#point2.5] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])161 162 [[Image(source:/wiki/Wiki-Pictures/NL/Sleep-OSD.jpg)]] [[br]]163 This overlay shows when you press the __"SLEEP"__ button. [[br]]164 It allows you to set the shutdown timer to automatically shutdown the receiver.165 166 [[br]]167 '''Subtitle''' [=#point2.6] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])168 169 [[Image(source:/wiki/Wiki-Pictures/NL/Subtitle-OSD.jpg)]] [[br]]170 This overlay shows when you press the __"SUBTITLE"__ button. [[br]]171 It allows you to select/enable a subtitle during playback.172 173 [[br]]174 '''EPG''' [=#point2.7] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])175 176 [[Image(source:/wiki/Wiki-Pictures/NL/EPG-OSD.jpg)]] [[br]]177 This overlay shows when you press the __"EPG"__ button. [[br]]178 It shows a list of the program information from here you can setup a timer or search the EPG.179 180 [[br]]181 '''Program Info''' [=#point2.8] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])182 183 [[Image(source:/wiki/Wiki-Pictures/NL/Program-Info-OSD.jpg)]] [[br]]184 This Overlay shows when you press the __"INFO"__ button when in the EPG display. [[br]]185 This shows the current selected program information.186 187 [[br]]188 '''Player''' [=#point2.9] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])189 190 [[Image(source:/wiki/Wiki-Pictures/NL/Internal-Player-OSD.jpg)]] [[br]]191 This overlay shows when you press the __"PLAY"__ button. [[br]]192 It allows you to select a movie or recording to play it also has a basic file manager.193 194 [[br]]195 '''Favourite''' [=#point2.10] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])196 197 [[Image(source:/wiki/Wiki-Pictures/NL/Favourite-OSD.jpg)]] [[br]]198 This overlay shows when you press the __"FAV"__ button. [[br]]199 It allows you to brouse through your favourits lists.200 201 [[br]]202 '''Record''' [=#point2.11] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])203 204 [[Image(source:/wiki/Wiki-Pictures/NL/Record-OSD.jpg)]] [[br]]205 This overlay shows when you press the __"RECORD"__ button. [[br]]206 It allows you to set the record function on the current tv channel.207 208 [[br]] -
wiki/pages/nl/Git-Changelog
r40899 r43267 1 [[TranslatedPages]]2 >----3 >'''3.7.7 GIT Changelog''' [=#point3.7.7] ([wiki:Interface-Operation#point3.7 Information (Back)])([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/NL/Git_Changelog.jpg)]][[BR]]8 >9 > here you can git information.10 11 [[br]]12 -
wiki/pages/nl/Graphic-EPG
r40899 r43267 1 [[TranslatedPages]]2 >----3 >'''3.1.3 Graphic EPG''' [=#point3.1.3] ([wiki:Interface-Operation#point3.1 Records and EPG(Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/NL/Graphical_EPG.jpg)]][[BR]]8 >9 Graphic EPG is a multi channel graphical EPG.10 11 12 [[br]]13 14 '''Coloured and Extra Button's Functions"15 16 The __"Coloured and Extra Buttons"__ along the bottom of the display bring up additional menus and options with in the Single EPG menu.17 please see below for more info on the functions of these buttons:.18 19 ||'''Red Button: (Timer)''' ||This will bring up the recording timer menu to set up a timer.||20 ||'''0 key (EPG Search):''' ||This will search the EPG for text you specify and bring up a list of matches where you may press the red button to set up a timer.||21 ||'''FAV Button: (Favourite)''' ||This will bring up Favourite Boquet menu to select the EPG you would like to display.||22 ||'''Info Button: (Info)''' ||This will bring up the selected program's EPG info string.||23 24 25 26 For information on setting up a timer Recording using the red button see ([WikiStart#point103.10.6 Records]) for more info.27 For information on setting proforming an EPG search using the 0 Key see ([WikiStart#point103.10.5 EPG Search]) for more info. -
wiki/pages/nl/HTTP-Settings
r40899 r43267 1 [[TranslatedPages]]2 >----3 >'''3.5.4.6 HTTP Settings''' [=#point3.5.4.6] ([wiki:Interface-Operation#point3.5.1 network (Back])4 >5 >6 >[[Image(source:/wiki/Wiki-Pictures/NL/HTTP-Settings.jpg)]][[br]]7 >8 Here you can setup your HTTP interface.9 10 [[br]]11 12 ||'''Start HTTPD:''' ||Start the webserver.||13 ||'''User:''' ||Sets the zoom level of the EPG to show more or less of a time span of the shown programs.||14 ||'''Password:''' ||Set to yes to use picons or the alternative Picon sets in the infobar and EPG stored in /var/media/autofs/sda1/swapextensions/usr/local/share/titan/picons/ directory.||15 ||'''HTTPD Port:''' ||Should the EPG be deleted before a the timed scan.||16 ||'''IP for Stream:''' ||Behavior after the EPG scan is completed EPG scan: Nothing (Stand-By) or Switch Off (Deep Stand-By).||17 ||'''Stream Port:''' ||Scan for a Media Highway EPG stream during EPG scan.||18 ||'''Start RGUID:''' ||Scan for a Media Highway version 2 EPG stream during EPG scan.||19 ||'''RGUID Port''' ||Scan for an OpenTV EPG stream during EPG scan.||20 21 To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes.22 23 [[br]]24 ----25 26 '''Coloured Button's Functions"27 28 The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the epg settings menu.29 please see below for more info on the functions of these buttons:.30 31 ||'''Text Button: (Keyboard)''' ||This will bring up the onscreen keyboard to edit the currently selected test string.||32 33 -
wiki/pages/nl/Hard-Disk
r40899 r43267 1 [[TranslatedPages]]2 >----3 >'''3.5.5 Hard Disk''' [=#point3.5.5] ([wiki:Interface-Operation#point3.5 System (Back)]) ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 >5 >Menu Picture place holder:6 >7 >[[Image(source:/wiki/Wiki-Pictures/NL/system-Hard_Disk.jpg)]][[BR]]8 >9 Here you can configure your harddisk.[[BR]]10 please select a menu item for more information.11 [[br]]12 13 * ([wiki:Format-Hdd#point3.5.5.1 Format HDD])14 * ([wiki:Filesystem-Check#point3.5.5.2 Filesystem Check])15 * ([wiki:Configure#point3.5.5.3 Configure])16 * ([wiki:Time-to-sleep#point3.5.5.4 Time to sleep])17 18 [[BR]] -
wiki/pages/nl/History
r40899 r43267 1 [[TranslatedPages]]2 ----3 '''1 TitanNit Info Contents ''' [=#point1] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 ----5 [[br]]6 This section conatins information on TitanNit and frequently asked questions about it.7 Please choose an item below to find more information.8 9 You may select a skip to a specific setup topic or scroll down to read the complete guide.10 11 {{{#!div style="width: 1100px; margin: auto"12 {{{#!table style="border: none"13 {{{#!td align=center valign=top style="border: none; font-size: 115%"14 {{{#!div style="float: left"15 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/History/About.png,align=left,link=[#point1.1])]]16 }}}17 '''([#point1.1 About])'''[[br]]18 {{{#!div style="float: left19 click here to find info about TitanNit20 }}}21 }}}22 {{{#!td align=center valign=top style="border: none; font-size: 115%"23 {{{#!div style="float: left"24 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/History/History.png,align=left,link=[#point1.2])]]25 }}}26 '''([#point1.2 History])'''[[br]]27 {{{#!div style="float: left28 click here to find info on the beginnings of TitanNit29 }}}30 }}}31 {{{#!td align=center valign=top style="border: none; font-size: 115%"32 {{{#!div style="float: left"33 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/History/Features.png,align=left,link=[#point1.3])]]34 }}}35 '''([#point1.3 Features])'''[[br]]36 {{{#!div style="float: left37 click here to find info on the various features of TitanNit38 }}}39 }}}40 }}}41 }}}42 43 {{{#!div style="width: 1100px; margin: auto"44 {{{#!table style="border: none"45 {{{#!td align=center valign=top style="border: none; font-size: 115%"46 {{{#!div style="float: left"47 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/History/Frequnetly_Asked_Questions.png,align=left,link=[#point1.4])]]48 }}}49 '''([#point1.4 Frequently Asked Questions])'''[[br]]50 {{{#!div style="float: left51 Apendixcies/ references [[br]]to other setup related topics.52 }}}53 }}}54 }}}55 }}}56 [[br]]57 [[br]]58 59 ----60 '''1 About''' [=#point1.1] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])61 ----62 [[br]]63 TitanNit is a semi closed source replacement operating system for kathrein and Atemio/Atevio digital set top receivers.64 It has come about as the users/devs wanted something better than was currently available.65 TitanNit is spawned from other projects and is developed by users come devs so it is easy of use but yet still remains powerfull and configurable and feature packed.[[br]]66 [[br]]67 [[br]]68 69 ----70 '''1 History''' [=#point1.2] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])71 ----72 [[br]]73 * Everything started in April 2011. For almost three weeks our Developer Nit secretly worked on the foundation of Titan. After the presentation by Nit Obi and the rest of the team came on board. Everybody was surprised by the rapid development of the Titan Project.74 * From the beginning the development and source of Titan was nonpublic, as it was not to be foreseen in which direction the development would go.75 * After a development period of 6 months our hardware manufacturer Atemio declared interest in the project. Looking back at Years of support through Atemio with the Enigma2 Software, Atemio was given main priority for Titan project.76 * A six-months agreement with Atemio was signed in December 2011.77 * Due to the good cooperation the agreement was extended and is still in force.78 * The basic idea for this project originated for various reasons:79 * due to the missing Python Chip and low CPU speed the sh4 receivers have always had problems with Enigma2.80 * the constant improvement and expansion of Enigma2 and the TDT Git was comprehensive and time-consuming.81 * the alternative Neutrino GIT at that time was not layed out to support twin tuner Receivers.82 * Nit then decided to combine both, the Enigma2 and the Neutrino, to a new Gui which implemented all advantages of both systems.83 * Neutrinos main advantage has always been its speed84 * Enigma2s advantage was the ease of integration and expansion with skins and extensions85 * These two systems combined into one new system was the basic idea of Titan.86 [[br]]87 [[br]]88 89 ----90 '''2 Features''' [=#point1.3] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])91 ----92 [[br]]93 '' Highlights of TitanNit ''