Ignore:
Timestamp:
01/22/19 02:39:08 (5 years ago)
Author:
aafsvn
Message:

[titan] autoupdate wiki files

File:
1 edited

Legend:

Unmodified
Added
Removed
  • wiki/pages/nl/Installation-Recovery-Mips-Atemio

    r40899 r43267  
    1 [[TranslatedPages]]
    2 ----
    3 '''8.061 Mips Atemio''' [=#point8.061] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    4 ----
    5 
    6 manufacturer blurb.....
    7 
    8 
    9 
    10 
    11 
    12 ----
    13 '''8.061 Atemio-Nemesis''' [=#point8.061] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    14 ----
    15 '' How do I install an Atemio 5000 Update UBI image? ''
    16  * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
    17  * Extract the zip file
    18  * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
    19     Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
    20      Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
    21  * Turn off the Receiver and disconnect all USB devices.
    22  * Connect the USB stick with the IRD file to your Receiver
    23  * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
    24    then the installation begins, Only then release the button.
    25     Note: If installation does not start , use a different USB stick.
    26  * After successfully installing the receiver will reboot and the installed image should start-up
    27 [[br]]
    28 [#point8 Top of Page]
    29 [[br]]
    30 ----
    31 '''8.062 Atemio5200''' [=#point8.062] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    32 ----
    33 '' How do I install an Atemio 5200 Update UBI image? ''
    34  * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
    35  * Extract the zip file
    36  * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
    37     Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
    38      Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
    39  * Turn off the Receiver and disconnect all USB devices.
    40  * Connect the USB stick with the IRD file to your Receiver
    41  * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
    42    then the installation begins, Only then release the button.
    43     Note: If installation does not start , use a different USB stick.
    44  * After successfully installing the receiver will reboot and the installed image should start-up
    45 [[br]]
    46 [#point8 Top of Page]
    47 [[br]]
    48 ----
    49 '''8.063 Atemio6000''' [=#point8.063] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    50 ----
    51 '' How do I install an Atemio 6000 Update UBI image? ''
    52  * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
    53  * Extract the zip file
    54  * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
    55     Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
    56      Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
    57  * Turn off the Receiver and disconnect all USB devices.
    58  * Connect the USB stick with the IRD file to your Receiver
    59  * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
    60    then the installation begins, Only then release the button.
    61     Note: If installation does not start , use a different USB stick.
    62  * After successfully installing the receiver will reboot and the installed image should start-up
    63 [[br]]
    64 [#point8 Top of Page]
    65 [[br]]
    66 ----
    67 '''8.064 Atemio6100''' [=#point8.064] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    68 ----
    69 '' How do I install an Atemio 6100 Update UBI image? ''
    70  * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
    71  * Extract the zip file
    72  * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
    73     Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
    74      Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
    75  * Turn off the Receiver and disconnect all USB devices.
    76  * Connect the USB stick with the IRD file to your Receiver
    77  * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
    78    then the installation begins, Only then release the button.
    79     Note: If installation does not start , use a different USB stick.
    80  * After successfully installing the receiver will reboot and the installed image should start-up
    81 [[br]]
    82 [#point8 Top of Page]
    83 [[br]]
    84 ----
    85 '''8.065 Atemio6200''' [=#point8.065] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    86 ----
    87 '' How do I install an Atemio 6200 Update UBI image? ''
    88  * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
    89  * Extract the zip file
    90  * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
    91     Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
    92      Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
    93  * Turn off the Receiver and disconnect all USB devices.
    94  * Connect the USB stick with the IRD file to your Receiver
    95  * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
    96    then the installation begins, Only then release the button.
    97     Note: If installation does not start , use a different USB stick.
    98  * After successfully installing the receiver will reboot and the installed image should start-up
    99 [[br]]
    100 [#point8 Top of Page]
    101 [[br]]
Note: See TracChangeset for help on using the changeset viewer.