Ignore:
Timestamp:
Jan 22, 2019, 2:39:08 AM (11 months ago)
Author:
aafsvn
Message:

[titan] autoupdate wiki files

File:
1 edited

Legend:

Unmodified
Added
Removed
  • wiki/pages/nl/Installation-Recovery-Mips-Golden-Interstar

    r40899 r43267  
    1 [[TranslatedPages]]
    2 ----
    3 '''8.080 Goldern interstar Xpeedlx1/2''' [=#point8.080] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    4 ----
    5 
    6 manufacturer blurb
    7 
    8 
    9 
    10 ----
    11 '''8.081 Goldern interstar Xpeedlx1/2''' [=#point8.081] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    12 ----
    13 ''How do I install a Xpeedlx1/2 update image? ''
    14  * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
    15  * Extract the zip file
    16  * Now copy the unzipped firmware folder "xpeedlx3"  to a formatted FAT32 USB stick.
    17     Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
    18  * Turn off the Receiver and disconnect all USB devices.
    19  * Connect the USB stick with the update image file
    20  * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
    21 
    22 Note: If installation does not start, use a different USB stick.
    23 •After successfully installing the receiver will reboot and the installed image should start-up
    24 [[br]]
    25 [#point8 Top of Page]
    26 [[br]]
    27 ----
    28 '''8.082 goldern interstar Xpeedlx3''' [=#point8.082] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    29 ----
    30 ''How do I install a Xpeedlx3 update image? ''
    31  * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
    32  * Extract the zip file
    33  * Now copy the unzipped firmware folder "xpeedlx3" to a formatted FAT32 USB stick.
    34     Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
    35  * Turn off the Receiver and disconnect all USB devices.
    36  * Connect the USB stick with the update image file
    37  * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
    38 
    39 Note: If installation does not start, use a different USB stick.
    40 •After successfully installing the receiver will reboot and the installed image should start-up
    41 [[br]]
    42 [#point8 Top of Page]
    43 [[br]]
Note: See TracChangeset for help on using the changeset viewer.