Changeset 43267 for wiki/pages/nl/Installation-Recovery-Mips-Miraclebox
- Timestamp:
- 01/22/19 02:39:08 (5 years ago)
- File:
-
- 1 edited
Legend:
- Unmodified
- Added
- Removed
-
wiki/pages/nl/Installation-Recovery-Mips-Miraclebox
r40899 r43267 1 [[TranslatedPages]]2 ----3 '''8.090 Miraclebox''' [=#point8.090] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])4 ----5 6 manufacturer blurb......7 8 9 10 11 12 ----13 '''8.091 Miraclebox Ultra''' [=#point8.091] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])14 ----15 '' How do I install an Miraclebox Ultra Update UBI image? ''16 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])17 * Extract the zip file18 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.19 Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).20 Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.21 * Turn off the Receiver and disconnect all USB devices.22 * Connect the USB stick with the IRD file to your Receiver23 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".24 then the installation begins, Only then release the button.25 Note: If installation does not start , use a different USB stick.26 * After successfully installing the receiver will reboot and the installed image should start-up27 [[br]]28 [#point8 Top of Page]29 [[br]]30 ----31 '''8.092 Miraclebox Mini''' [=#point8.092] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])32 ----33 '' How do I install an Miraclebox Mini Update UBI image? ''34 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])35 * Extract the zip file36 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.37 Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).38 Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.39 * Turn off the Receiver and disconnect all USB devices.40 * Connect the USB stick with the IRD file to your Receiver41 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".42 then the installation begins, Only then release the button.43 Note: If installation does not start , use a different USB stick.44 * After successfully installing the receiver will reboot and the installed image should start-up45 [[br]]46 [#point8 Top of Page]47 [[br]]
Note: See TracChangeset
for help on using the changeset viewer.