Ignore:
Timestamp:
01/22/19 02:39:08 (5 years ago)
Author:
aafsvn
Message:

[titan] autoupdate wiki files

File:
1 edited

Legend:

Unmodified
Added
Removed

  • wiki/pages/pl/Installation-Recovery-SH4-Homecast

    r40231 r43267  
    1 [[TranslatedPages]]
    2 ----
    3 '''8.020 Homecast''' [=#point8.020] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    4 ----
    5 
    6 Fortis is a Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized bootloaders to lock them to a specific sales region, TitanNit installation is possible after the installation of a Atevio compatible bootloader.
    7 
    8 '''SH4 Homecast Contents'''
    9 
    10  * [#point8.021 8.021 Homecast pro]
    11 
    12 
    13 '''Additional Info'''
    14 
    15  * [#point8.022 8.022 Uninstallation]
    16  * [#point8.023 8.025 Update TitanNit]
    17  * [#point8.024 8.024 IRD Download Location]
    18 
    19 ----
    20 '''8.021 Homecast Pro''' [=#point8.021] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    21 ----
    22 '' How do I install an Homecast UPDATEUSB Image? ''
    23  * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.2 IRD Download Locations])
    24  * Extract the zip file
    25  * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.
    26      Note: The USB stick should not be formatted with windows. Use a separate program, such as the
    27      " HP USB Disk Storage Format Tool" (freeware program).
    28      Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
    29  * Turn off the Receiver and disconnect all USB devices.
    30  * Connect the USB stick with the IMG file to your Receiver
    31 * Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,
    32     then the installation starts. Only then release the button
    33      Note: If installation does not start, use a different USB stick.
    34  * The installation is finished when DONE appears on the receiver.
    35  * Restart the machine after by the main switch again to .
    36 [[br]]
    37 [#point8 Top of Page]
    38 [[br]]
    39 
    40 ----
    41 '''8.022 Uninstalling Titan''' [=#point8.022] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
    42 ----
    43 If you have an Homecast receiver all you have to do is install your original IMG file as explained above and no bootloader changes are necessary.
    44 
    45 [[br]]
    46 [#point8 Top of Page]
    47 [[br]]
    48 
    49 ----   
    50 '''8.023 Update TitanNit''' [=#point8.023] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
    51 ----
    52 There are two ways to update your TitanNit version and there are merits to both methods :
    53 
    54 IRD offline method see [#point8.020 Homecast Contents] and select your Receiver model to show information on how to update titan using an IRD TitanNit image.
    55 [[br]]
    56 ''Note: using this method plugins and files stored to Flash will be formatted when the update is preformed.
    57 Plugins and files installed to MNT or a valid configured storage device will retain there settings .''
    58 
    59 Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.
    60 [[br]]
    61 ''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
    62 [[br]]
    63 [#point8 Top of Page]
    64 [[br]]
    65 
    66 ----   
    67 '''8.024 IRD Download Locations''' [=#point8.024] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
    68 ----
    69 
    70 * [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]] 
    71  
    72 [[br]] 
    73 [#point8 Top of Page] 
    74 [[br]]
    75 
Note: See TracChangeset for help on using the changeset viewer.