Ignore:
Timestamp:
12/06/20 23:20:07 (3 years ago)
Author:
aafsvn
Message:

[titan] autoupdate wiki files

File:
1 edited

Legend:

Unmodified
Added
Removed
  • wiki/pages/de/Installation-Recovery

    r43268 r44949  
    1 [[TranslatedPages]]
    21----
    32'''8 Installation / Recovery Inhaltsverzeichnis''' [=#point8] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    43
    54----
    6 
    7 This section contains information on installation and removal of TitanNit from your receiver
    8 {{{#!div style="width: 1100px; margin: auto"
    9  {{{#!table style="border: none"
    10   {{{#!td align=center valign=top style="border: none; font-size: 115%"
    11   {{{#!div style="float: left"
    12 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Atemio.png, 60px,align=left,link=http://www.atemio.de Atemio homepage)]]
    13   }}}
    14   '''SH4 Atemio'''[[br]]
    15   {{{#!div style="float: left
    16  [http://www.atemio.de Atemio homepage]
    17  * [#point8.001 8.001 Atemio510]
    18  * [#point8.002 8.002 Atemio520]
    19  * [#point8.003 8.003 Atemio530]
    20  * [#point8.004 8.004 Atemio7600]
    21  * [#point8.005 8.005 Atemio700]
    22  * [#point8.006 8.006 Atemio7000]
    23   }}}
    24   }}}
    25   {{{#!td align=center valign=top style="border: none; font-size: 115%"
    26   {{{#!div style="float: left"
    27 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Fortis.png, 60px,align=left,link=http://www.fortis.co.kr Fortis homepage)]]
    28   }}}
    29   '''SH4 Fortis'''[[br]]
    30    {{{#!div style="float: left
    31  [http://www.fortis.co.kr Fortis homepage]
    32  * [#point8.011 8.011 Fortis Clone]
    33  * [#point8.012 8.012 Bootloader Installation]
    34  * [#point8.013 8.013 Fortis FS-9000]
    35  * [#point8.014 8.014 Fortis FS-9200]
    36  * [#point8.015 8.015 Fortis HS-9510]
    37  * [#point8.016 8.016 Fortis HX-8200]
    38  * [#point8.017 8.017 Fortis HS-7810]
    39   }}}
    40   }}}
    41  {{{#!td align=center valign=top style="border: none; font-size: 115%"
    42   {{{#!div style="float: left"
    43 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/homecast.png, 60px,align=left,link=http://www.myhomecast.nl Homecast homepage)]]
    44   }}}
    45   '''SH4 Homecast'''[[br]]
    46  {{{#!div style="float: left
    47  [http://www.myhomecast.nl Homecast homepage]
    48  * [#point8.021 8.021 Homecast Pro]
    49   }}}
    50   }}}
    51   |----
    52   {{{#!td align=center valign=top style="border: none; font-size: 115%"
    53   {{{#!div style="float: left"
    54 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/IPBox.png, 60px,align=left,link=http://www.abipbox.com/ AB IPBox homepage)]]
    55   }}}
    56   '''SH4 IPBox'''[[br]]
    57   {{{#!div style="float: left
    58  [http://www.abipbox.com/ AB IPBox homepage]
    59  * [#point8.031 8.031 Ipbox91]
    60  * [#point8.032 8.032 Ipbox900]
    61  * [#point8.033 8.033 Ipbox910]
    62  * [#point8.034 8.034 Ipbox9000]
    63   }}}
    64   }}}
    65   {{{#!td align=center valign=top style="border: none; font-size: 115%"
    66   {{{#!div style="float: left"
    67 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/kathrein.png, 60px,align=left,link=http://www.kathrein-gmbh.at kathrein homepage)]]
    68   }}}
    69   '''SH4 Kathrein'''[[br]]
    70   {{{#!div style="float: left
    71  [http://www.kathrein-gmbh.at kathrein homepage]
    72  * [#point8.041 8.041 Ufs910]
    73  * [#point8.042 8.042 Ufs912]
    74  * [#point8.043 8.043 Ufs913]
    75  * [#point8.044 8.044 Ufs922]
    76  * [#point8.045 8.045 Ufc960]
    77   }}}
    78   }}}
    79   {{{#!td align=center valign=top style="border: none; font-size: 115%"
    80   {{{#!div style="float: left"
    81 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Spark.png, 60px,align=left,link=http://www.spark-tv.com Spark homepage)]]
    82   }}}
    83   '''SH4 Spark'''[[br]]
    84   {{{#!div style="float: left
    85  [http://www.spark-tv.com Spark homepage]
    86  * [#point8.051 8.051 Spark7111]
    87  * [#point8.052 8.052 Spark7162]
    88   }}}
    89   }}}
    90   |----
    91  {{{#!td align=center valign=top style="border: none; font-size: 115%"
    92   {{{#!div style="float: left"
    93 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Atemio.png, 60px,align=left,link=http://www.atemio.de Atemio homepage)]]
    94   }}}
    95   '''Mips Atemio'''[[br]]
    96   {{{#!div style="float: left
    97  [http://www.atemio.de Atemio homepage]
    98  * [#point8.061 8.061 Atemio5000 AKA Nemesis]
    99  * [#point8.062 8.062 Atemio5200]
    100  * [#point8.063 8.063 Atemio6000]
    101  * [#point8.064 8.064 Atemio6100]
    102  * [#point8.065 8.065 Atemio6200]
    103   }}}
    104   }}}
    105   {{{#!td align=center valign=top style="border: none; font-size: 115%"
    106   {{{#!div style="float: left"
    107 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/beyonwiz.png, 60px,align=left,link=http://www.beyonwiz.com.au Beyonwiz homepage)]]
    108   }}}
    109   '''Mips Beyonwiz'''[[br]]
    110  {{{#!div style="float: left
    111  [http://www.beyonwiz.com.au Beyonwiz homepage]
    112  * [#point8.071 8.071 BeyonwizT4]
    113   }}}
    114   }}}
    115   {{{#!td align=center valign=top style="border: none; font-size: 115%"
    116   {{{#!div style="float: left"
    117 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Goldern_Interstar.png, 60px,align=left,link=http://www.golden-interstar.pl Golden Interstar homepage)]]
    118   }}}
    119   '''Mips Golden Interstar'''[[br]]
    120   {{{#!div style="float: left
    121  [http://www.golden-interstar.pl Golden Interstar homepage]
    122  * [#point8.081 8.081 Xpeedlx1/2]
    123  * [#point8.082 8.082 Xpeedlx3]
    124   }}}
    125   }}}
    126   |----
    127   {{{#!td align=center valign=top style="border: none; font-size: 115%"
    128   {{{#!div style="float: left"
    129 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Miraclebox.png, 60px,align=left,link=http://www.miraclebox.se miraclebox homepage)]]
    130   }}}
    131   '''Mips Miraclebox[[br]]
    132   {{{#!div style="float: left
    133  [http://www.miraclebox.se Miraclebox homepage]
    134  * [#point8.091 8.091 MBUltra]
    135  * [#point8.092 8.092 MBMini]
    136 }}}
    137 }}}
    138   {{{#!td align=center valign=top style="border: none; font-size: 115%"
    139   {{{#!div style="float: left"
    140 [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Sezam.png, 60px,align=left,link=http://www.sezam-club.ru/ homepage)]]
    141   }}}
    142   '''Mips Sezam'''[[br]]
    143  {{{#!div style="float: left
    144  [http://www.sezam-club.ru/ homepage]
    145  * [#point8.101 8.101 Sezam-Marvel]
    146  * [#point8.102 8.102 Sezam-1000HD]
    147   }}}
    148   }}}
    149 }}}
    150 }}}
    151 
    152 
    153 
     5[[br]]
     6
     7This section contains information on instalation and removal of TitanNit from your receiver
     8
     9[[br]]
    15410'''SH4 Models'''
    155 ----
    156 '''8.1 Atemio510 and Fortis HS-7810''' [=#point8.001]  ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
     11
     12 * [#point8.1 8.1 Atemio510 und kompatible Modelle]
     13 * [#point8.2 8.2 Atemio520 und kompatible Modelle]
     14 * [#point8.3 8.3 Atemio530 und kompatible Modelle]
     15 * [#point8.4 8.4 Atemio7600 und kompatible Modelle]
     16 * [#point8.5 8.5 Atevio700 und kompatible Modelle ]
     17 * [#point8.6 8.6 Atevio7000 und kompatible Modelle]
     18 * [#point8.7 8.7 Ipbox91 und kompatible Modelle]
     19 * [#point8.8 8.8 Ipbox900 und kompatible Modelle]
     20 * [#point8.9 8.9 Ipbox910 und kompatible Modelle]
     21 * [#point8.10 8.10 Ipbox9000 und kompatible Modelle]
     22 * [#point8.11 8.11 Ufs910]
     23 * [#point8.12 8.12 Ufs912]
     24 * [#point8.13 8.13 Ufs913]
     25 * [#point8.14 8.14 Ufs922]
     26
     27'''MIPS Models'''
     28
     29 * [#point8.20 8.20 Atemio-Nemesis]
     30 * [#point8.21 8.21 Atemio5200]
     31 * [#point8.22 8.22 Atemio6000]
     32 * [#point8.23 8.23 Atemio6100]
     33 * [#point8.24 8.24 Atemio6200]
     34
     35'''Aditional Info'''
     36
     37 * [#point8.30 8.30 Installation auf anderen Fortis Modellen]
     38 * [#point8.31 8.31 Deinstallation auf anderen Fortis Modellen]
     39 * [#point8.32 8.32 IRD Update Titan]
     40 * [#point8.33 8.33 IRD Download Locations]
     41[[br]]
     42[[br]]
     43[[br]]
     44
     45
     46'''SH4 Models'''
     47----
     48'''8.1 Atemio510''' [=#point8.1] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    15749----
    15850'' Wie installiere ich ein Atemio 510 IRD Image? ''
     
    16961
    17062[[br]]
    171   '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]
    172 * [http://sbnc.dyndns.tv/trac/wiki/de/Remote-Device-Control#point4.6  iboot sh4 flashen and recovery ][[br]] 
    173 
    174 [#point8 Top of Page]
    175 [[br]]
    176 ----
    177 '''8.2 Atemio520''' [=#point8.002]  ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
     63
     64----
     65'''8.2 Atemio520''' [=#point8.2] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    17866----
    17967'' Wie installiere ich ein Atemio 520 IRD Image? ''
     
    18977     Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.
    19078 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen
    191 [[br]]
    192   '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]
    193 * [http://sbnc.dyndns.tv/trac/wiki/de/Remote-Device-Control#point4.6  iboot sh4 flashen and recovery ][[br]] 
    194 
    195 [[br]]
    196 [#point8 Top of Page]
    197 [[br]]
    198 ----
    199 '''8.3 Atemio530''' [=#point8.003]  ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
     79
     80[[br]]
     81
     82----
     83'''8.3 Atemio530''' [=#point8.3] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    20084----
    20185'' Wie installiere ich ein Atemio 530 IRD Image? ''
     
    21397
    21498[[br]]
    215 [#point8 Top of Page]
    216 [[br]]
    217 ----
    218 '''8.4 Atemio7600 and Fortis HX-8200''' [=#point8.004]  ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
     99----
     100'''8.4 Atemio7600''' [=#point8.4] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    219101----
    220102'' Wie installiere ich ein Atemio 7600 IRD Image? ''
     
    230112     Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.
    231113 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen
    232 [[br]]
    233   '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]
    234 * [http://sbnc.dyndns.tv/trac/wiki/de/Remote-Device-Control#point4.6  iboot sh4 flashen and recovery ][[br]] 
    235 
    236 [[br]]
    237 [#point8 Top of Page]
    238 [[br]]
    239 ----
    240 '''8.5 Atevio700''' [=#point8.005]  ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
     114
     115[[br]]
     116----
     117'''8.5 Atevio700''' [=#point8.5] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    241118----
    242119'' Wie installiere ich ein Atevio 700 IRD Image? ''
     
    252129     Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.
    253130 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen
    254 [[br]]
    255   '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]
    256 * [http://sbnc.dyndns.tv/trac/wiki/de/Remote-Device-Control#point4.6  iboot sh4 flashen and recovery ][[br]] 
    257 
    258 [#point8 Top of Page]
    259 [[br]]
    260 ----
    261 '''8.6 Atevio7000 and Fortis FS-9000/9200''' [=#point8.006]  ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
     131
     132[[br]]
     133----
     134'''8.6 Atevio7000''' [=#point8.6] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    262135----
    263136'' Wie installiere ich ein Atevio 7000 IRD Image? ''
    264  * Besuchen Sie die Atemio Homepage oder das AAF Digital Forum und laden Sie sich aktuellest TitanNit Firmware. ([#point8.33 Download Locations])
     137 * Besuchen Sie die Atemio Homepage oder das AAF Digital Forum und laden Sie sich aktuellest TitanNit Firmware. ([#point8.33 IRD Download Locations])
    265138 * Entpacken Sie die ZIP-Datei
    266139 * Kopieren Sie nun die entpackte IRD-Firmware-Datei auf einen in FAT32 formatierten USB-Stick.
     
    274147 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen
    275148[[br]]
    276   '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]
    277 * [http://sbnc.dyndns.tv/trac/wiki/de/Remote-Device-Control#point4.6  iboot sh4 flashen and recovery ][[br]] 
    278 [#point8 Top of Page]
    279 [[br]]
    280 ----
    281 '''SH4 Fortis based clone receiver detection (hardware profile)'''[=#point8.011]  ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    282 ----
    283 
    284 As it is virtually impossible to list every fortis clone box on this wiki and data would be repeated over and over again it is broken up into harware revisions to compair that to the atevio model of that box.
    285 This list will help you select the correct image and bootloader for your clone reciever below is a specifications list check the back of your manual included with your receiver and look at the table below to select the correct hardware model.
    286 See here for a full list of known Fortis ([wiki:Wiki#Supported-Receivers#point7 Clone Supported Recievers])
    287 
    288 {{{#!div style="width: 1000px; margin: auto"
    289 ||'''Model System'''||'''Tuner'''||'''CPU'''||'''RAM'''||'''ROM (Flash)'''||'''USB'''||'''PVR Funktion'''||'''CardReader'''||'''Common interface'''||'''Display'''||'''Width'''||'''features'''||
    290 ||[#point8.6 Fortis FS-9000 HD PVR]||DVB-S/S2 2||STI_7101 266 Mhz||192MB||32MB||2||Internal 2.5 or 3.5 SATA, external via USB||1 (*2)||2||12-digit 5x7matrix||43 cm|| ||
    291 ||[#point8.6 Fortis FS-9200 HD PVR]||DVB-S/S2 2||STI_7101 266 Mhz||192MB||32MB||2||eSATA & USB||1 (*2)||2||12-digit 5x7matrix||34 cm|| ||
    292 ||[#point8.5 Fortis HS-9510]||DVB-S/S2 1||STI_7101 266 Mhz||192MB||32MB||1||USB||1 (*2)||2||8-digit 14segment||34 cm|| ||
    293 ||[#point8.4 Fortis HX-8200 HD PVR]||DVB-S/S2, DVB-T2, DVB-C 1/2||STI_7105 450 Mhz||256MB||64MB||3||Internal 2,5´´SATA-HDD external via eSATA + USB||2||2||12-digit 5x7matrix||34 cm||Plug&Play Tuner, Youtube, Browser, FreeTV+||
    294 ||[#point8.1 Fortis HS-7810 HD PVR]||DVB-S/S2 1||STI_7110 450 Mhz||256MB||32MB||2||USB||1||2||4-digit 7segment||26 cm||YouTube, Browser, FreeTV+||
    295 }}}
    296 
    297 '''NOTE:'''[[BR]]
    298  * The Fortis HS-7810 is a clone of the Atemio510/520 Models[[BR]]
    299  * The Fortis HX-8200 is a clone of the Atemio7600 Model[[BR]]
    300  * The Fortis HS-9510 is a clone of the Atemio700 clone Model[[BR]]
    301  * The Fortis FS-9000/Fortis FS-9200 is a clone of the Atemio7000 Models
    302 
    303 
    304 '''Aditional Info'''
    305  
    306  * [#point8.012 8.012 Bootloader Installation] (required for a fortis/clone reciever to accept atemio software)
    307  * [#point8.111 8.111 Uninstallation On other Fortis Receivers]
    308  * [#point8.112 8.112 Update TitanNit]
    309  * [#point8.113 8.113 IRD Download Location]
    310 [[br]]
    311 [#point8 Top of Page]
    312 [[br]]
    313 ----
    314 '''8.021 Homecast''' [=#point8.021]  ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    315 ----
    316 '' How do I install an Homecast UPDATEUSB Image? ''
    317  * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
    318  * Extract the zip file
    319  * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.
    320      Note: The USB stick should not be formatted with windows. Use a separate program, such as the
    321      " HP USB Disk Storage Format Tool" (freeware program).
    322      Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
    323  * Turn off the Receiver and disconnect all USB devices.
    324  * Connect the USB stick with the IMG file to your Receiver
    325 * Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,
    326     then the installation starts. Only then release the button
    327      Note: If installation does not start, use a different USB stick.
    328  * The installation is finished when DONE appears on the receiver.
    329  * Restart the machine after by the main switch again to .
    330 [[br]]
    331 [#point8 Top of Page]
    332 [[br]]
    333 ----
    334 '''8.031 Ipbox91''' [=#point8.031]  ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
     149----
     150'''8.7 Ipbox91''' [=#point8.7] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    335151----
    336152'' Wie installiere ich ein Ipbox 91 UPDATEUSB Image? ''
     
    347163 * Die Installation ist beended wenn DONE am Receiver erscheint.
    348164 * Starten Sie das Gerät danach am Hauptschalter neu.
    349 [[br]]
    350 [#point8 Top of Page]
    351 [[br]]
    352 ----
    353 '''8.032 Ipbox900''' [=#point8.032]  ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
     165
     166[[br]]
     167----
     168'''8.8 Ipbox900''' [=#point8.8] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    354169----
    355170'' Wie installiere ich ein Ipbox 900 UPDATEUSB Image? ''
     
    366181 * Die Installation ist beended wenn DONE am Receiver erscheint.
    367182 * Starten Sie das Gerät danach am Hauptschalter neu.
    368 [[br]]
    369 [#point8 Top of Page]
    370 [[br]]
    371 ----
    372 '''8.033 Ipbox910''' [=#point8.033]  ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
     183
     184[[br]]
     185----
     186'''8.9 Ipbox910''' [=#point8.9] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    373187----
    374188'' Wie installiere ich ein Ipbox 910 UPDATEUSB Image? ''
     
    385199 * Die Installation ist beended wenn DONE am Receiver erscheint.
    386200 * Starten Sie das Gerät danach am Hauptschalter neu.
    387 [[br]]
    388 [#point8 Top of Page]
    389 [[br]]
    390 ----
    391 '''8.034 Ipbox9000''' [=#point8.034]  ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
     201
     202[[br]]
     203----
     204'''8.10 Ipbox9000''' [=#point8.10] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    392205----
    393206'' Wie installiere ich ein Ipbox 9000 UPDATEUSB Image? ''
     
    404217 * Die Installation ist beended wenn DONE am Receiver erscheint.
    405218 * Starten Sie das Gerät danach am Hauptschalter neu.
    406 [[br]]
    407 [#point8 Top of Page]
    408 [[br]]
    409 ----
    410 '''8.041 Kathrein Ufs910''' [=#point8.041]  ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    411 ----
     219
     220[[br]]
     221----
     222'''8.11 Kathrein Ufs910''' [=#point8.11] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
     223----
     224
    412225'' Wie installiere ich ein Kathrein UFS910 Update Image? ''
    413226 * Beim Installieren per usb wird der MNT Bereich im Image gelöscht das ist gleichzusetzen wie ein (Recovery-Image), beim Onlineupdate bleibt der Bereich erhalten.
     
    423236     Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.
    424237 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen
    425 [[br]]
    426 [#point8 Top of Page]
    427 [[br]]
    428 ----
    429 '''8.042 Kathrein UFS912''' [=#point8.042] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
     238
     239
     240[[br]]
     241----
     242'''8.12 Kathrein UFS912''' [=#point8.12] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    430243----
    431244'' Wie installiere ich ein Kathrein UFS912 Update Image? ''
     
    441254     Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.
    442255 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen
    443 [[br]]
    444 [#point8.1 Top of Page]
    445 [[br]]
    446 ----
    447 '''8.043 Kathrein UFS913''' [=#point8.043] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
     256
     257
     258[[br]]
     259----
     260'''8.13 Kathrein UFS913''' [=#point8.13] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    448261----
    449262'' Wie installiere ich ein Kathrein UFS913 Update Image? ''
     
    460273 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen
    461274
    462 [[br]]
    463 [#point8.1 Top of Page]
    464 [[br]]
    465 ----
    466 '''8.044 Kathrein UFS922''' [=#point8.044]  ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
     275
     276[[br]]
     277----
     278'''8.14 Kathrein UFS922''' [=#point8.14] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    467279----
    468280'' Wie installiere ich ein Kathrein UFS922 Update Image? ''
     
    480292 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen
    481293[[br]]
    482 [#point8 Top of Page]
    483 [[br]]
    484 ----
    485 '''8.045 Kathrein UFC960''' [=#point8.045]  ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    486 ----
    487 '' Wie installiere ich ein Kathrein UFC960 Update Image? ''
    488  * Beim Installieren per usb wird der MNT Bereich im Image gelöscht das ist gleichzusetzen wie ein (Recovery-Image), beim Onlineupdate bleibt der Bereich erhalten.
    489  * Besuchen Sie die das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.33 IRD Download Locations])
    490  * Entpacken Sie die ZIP-Datei.
    491  * Kopieren Sie nun die entpackte Update-Firmware-Datei auf einen in FAT32 formatierten USB-Stick und platzieren sie die Datei im /kathrein/ufc960 Ordner
    492      Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.
    493      Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.
    494  * Schalten Sie das Gerät aus.
    495  * USB Stick mit der Update-Datei anschließen
    496  * Gerät einschalten (Netzstecker anschließen) und gleichzeitig die Radio-Taste am Gerät solange gedrückt halten (ca. 5 Sekunden), bis „emergency boot“ erscheint,
    497    anschließend beginnt die Installation. Erst danach die Taste loslassen
    498      Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.
    499  * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen
    500 [[br]]
    501 [#point8 Top of Page]
    502 [[br]]
    503 ----
    504 '''8.051 SPARK (7111)''' [=#point8.051]  ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    505 ----
    506 '' Wie installiere ich ein Spark (7111) Update Image? ''
    507  * Besuchen Sie die das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.33 IRD Download Locations])
    508  * Entpacken Sie die ZIP-Datei.
    509  * Kopieren Sie nun die entpackte Update-Firmware-Datei auf einen in FAT32 formatierten USB-Stick und platzieren sie die Dateien e2jffs2.img und uImage im /enigma2 Ordner
    510      Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.
    511      Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.
    512  * Schalten Sie das Gerät aus.
    513  * USB Stick mit der Update-Datei anschließen
    514  * Gerät einschalten (Netzstecker anschließen) und gleichzeitig die Ok-Taste am Gerät solange gedrückt halten (ca. 5 Sekunden), bis „Forc“ erscheint,
    515    anschließend beginnt die Installation es erscheint "U LD" im Vfd. Erst danach die Taste loslassen
    516      Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.
    517  * Nach der Installation es erscheint "SUCC" im Vfd bootet der Receiver neu und das Sendebild sollte erscheinen
    518 [[br]]
    519 [#point8 Top of Page]
    520 [[br]]
    521 ----
    522 '''8.052 SPARK7162''' [=#point8.052]  ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    523 ----
    524 '' Wie installiere ich ein Spark 7111 Update Image? ''
    525  * Besuchen Sie die das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.33 IRD Download Locations])
    526  * Entpacken Sie die ZIP-Datei.
    527  * Kopieren Sie nun die entpackte Update-Firmware-Datei auf einen in FAT32 formatierten USB-Stick und platzieren sie die Dateien e2jffs2.img und uImage im /enigma2 Ordner
    528      Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.
    529      Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.
    530  * Schalten Sie das Gerät aus.
    531  * USB Stick mit der Update-Datei anschließen
    532  * Gerät einschalten (Netzstecker anschließen) und gleichzeitig die Ok-Taste am Gerät solange gedrückt halten (ca. 5 Sekunden), bis „Forc“ erscheint,
    533    anschließend beginnt die Installation es erscheint "U LD" im Vfd. Erst danach die Taste loslassen
    534      Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.
    535  * Nach der Installation es erscheint "SUCC" im Vfd bootet der Receiver neu und das Sendebild sollte erscheinen
    536 [[br]]
    537 [#point8 Top of Page]
     294[[br]]
    538295[[br]]
    539296
    540297'''Mips Models'''
    541298----
    542 '''8.061 Atemio-Nemesis''' [=#point8.061]  ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    543 ----
    544 '' Wie installiere ich ein Atemio Nemesis Update Image? ''
    545  * Besuchen Sie die Atemio Homepage oder das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.33 Firmware Download Locations])
    546  * Entpacken Sie die ZIP-Datei auf ihr PC
    547  * Kopieren Sie den kompletten Ordner "atemio" auf auf einen in FAT32 formatierten USB-Stick.
    548      Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.
    549      Des Weiteren empfehlen wir günstige USB Sticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.
    550  * Schalten Sie das Gerät aus.
    551  * USB Stick mit den zuvor kopierten "atemio" Ordner anschließen
    552  * Gerät einschalten (Netzstecker anschließen), das Image wir automatisch erkannt und mit dem Drücken Vol-Up Taste (dritte von links) wird die Installation des Image bestätigt,
    553    anschließend beginnt die Installation. Bitte warten bis die Installation vollständig abgeschlossen wurde.
    554      Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.
    555  * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen. Den USB Stick vorher entfernen.
    556 [[br]]
    557 [#point8 Top of Page]
    558 [[br]]
    559 ----
    560 '''8.062 Atemio5200''' [=#point8.062]  ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
     299'''8.20 Atemio-Nemesis''' [=#point8.20] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
     300----
     301'' Wie installiere ich ein Atemio 5000 Update Image? ''
     302 * Besuchen Sie die Atemio Homepage oder das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.33 IRD Download Locations])
     303 * Entpacken Sie die ZIP-Datei
     304 * Kopieren Sie nun die Firmware-Datei auf einen in FAT32 formatierten USB-Stick und entpacken Sie diese direkt auf dem USB-STick.
     305     Hinweis: Nach dem auspacken wird ein Ordner hdp erstellt. Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.
     306     Des Weiteren empfehlen wir günstige USBSticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.
     307 * Schalten Sie das Gerät aus.
     308 * USB Stick mit der Ausgepackten Firmware-Datei anschließen
     309 * Gerät einschalten (Netzstecker anschließen) und drücken Sie die Vol+ am Gerät (2 Taste von rechts) wenn es im Vfd (Lcd Display) des Gerätes angezeigt wird solange bis „Flashing...“ erscheint,
     310   anschließend beginnt die Installation. Erst danach die Taste loslassen
     311     Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.
     312 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen
     313
     314[[br]]
     315----
     316'''8.21 Atemio5200''' [=#point8.21] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    561317----
    562318'' Wie installiere ich ein Atemio 5200 Update Image? ''
     
    568324 * Schalten Sie das Gerät aus.
    569325 * USB Stick mit der Ausgepackten Firmware-Datei anschließen
    570  * Gerät einschalten (Netzstecker anschließen) und drücken Sie die CH+ am Gerät (1 Taste von rechts) wenn es im Vfd (Lcd Display) des Gerätes angezeigt wird solange bis „Flashing...bzw.U-rf“ erscheint,
    571    anschließend beginnt die Installation. Erst danach die Taste loslassen
    572      Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.
    573  * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen
    574 [[br]]
    575 [#point8 Top of Page]
    576 [[br]]
    577 ----
    578 '''8.063 Atemio6000''' [=#point8.063]  ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
     326 * Gerät einschalten (Netzstecker anschließen) und drücken Sie die CH+ am Gerät (1 Taste von rechts) wenn es im Vfd (Lcd Display) des Gerätes angezeigt wird solange bis „Flashing...“ erscheint,
     327   anschließend beginnt die Installation. Erst danach die Taste loslassen
     328     Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.
     329 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen
     330
     331[[br]]
     332----
     333'''8.22 Atemio6000''' [=#point8.22] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    579334----
    580335'' Wie installiere ich ein Atemio 6000 Update Image? ''
     
    586341 * Schalten Sie das Gerät aus.
    587342 * USB Stick mit der Ausgepackten Firmware-Datei anschließen
    588  * Gerät einschalten (Netzstecker anschließen) und drücken Sie die CH+ am Gerät (1 Taste von rechts) wenn es im Vfd (Lcd Display) des Gerätes angezeigt wird solange bis „Flashing...bzw.U-rf“ erscheint,
    589    anschließend beginnt die Installation. Erst danach die Taste loslassen
    590      Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.
    591  * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen
    592 [[br]]
    593 [#point8 Top of Page]
    594 [[br]]
    595 ----
    596 '''8.064 Atemio6100''' [=#point8.064]  ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
     343 * Gerät einschalten (Netzstecker anschließen) und drücken Sie die CH+ am Gerät (1 Taste von rechts) wenn es im Vfd (Lcd Display) des Gerätes angezeigt wird solange bis „Flashing...“ erscheint,
     344   anschließend beginnt die Installation. Erst danach die Taste loslassen
     345     Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.
     346 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen
     347
     348----
     349'''8.23 Atemio6100''' [=#point8.23] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    597350----
    598351'' Wie installiere ich ein Atemio 6100 Update Image? ''
     
    604357 * Schalten Sie das Gerät aus.
    605358 * USB Stick mit der Ausgepackten Firmware-Datei anschließen
    606  * Gerät einschalten (Netzstecker anschließen) und drücken Sie die CH+ am Gerät (1 Taste von rechts) wenn es im Vfd (Lcd Display) des Gerätes angezeigt wird solange bis „Flashing...bzw.U-rf“ erscheint,
    607    anschließend beginnt die Installation. Erst danach die Taste loslassen
    608      Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.
    609  * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen
    610 [[br]]
    611 [#point8 Top of Page]
    612 [[br]]
    613 ----
    614 '''8.065 Atemio6200''' [=#point8.065]  ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
     359 * Gerät einschalten (Netzstecker anschließen) und drücken Sie die CH+ am Gerät (1 Taste von rechts) wenn es im Vfd (Lcd Display) des Gerätes angezeigt wird solange bis „Flashing...“ erscheint,
     360   anschließend beginnt die Installation. Erst danach die Taste loslassen
     361     Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.
     362 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen
     363
     364----
     365'''8.24 Atemio6200''' [=#point8.24] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    615366----
    616367'' Wie installiere ich ein Atemio 6200 Update Image? ''
     
    622373 * Schalten Sie das Gerät aus.
    623374 * USB Stick mit der Ausgepackten Firmware-Datei anschließen
    624  * Gerät einschalten (Netzstecker anschließen) und drücken Sie die CH+ am Gerät (1 Taste von rechts) wenn es im Vfd (Lcd Display) des Gerätes angezeigt wird solange bis „Flashing...bzw.U-rf"“ erscheint,
    625    anschließend beginnt die Installation. Erst danach die Taste loslassen
    626      Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.
    627  * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen
    628 [[br]]
    629 [#point8 Top of Page]
    630 [[br]]
    631 ----
    632 '''8.071 Beyonwiz T4''' [=#point8.071]  ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    633 ----
    634 '' Wie installiere ich ein Atemio Nemesis Update Image? ''
    635  * Besuchen Sie die Atemio Homepage oder das AAF Digital Forum und laden Sie sich die aktuellste TitanNit Firmware. ([#point8.33 Firmware Download Locations])
    636  * Entpacken Sie die ZIP-Datei auf ihr PC
    637  * Kopieren Sie den kompletten Ordner "atemio" auf auf einen in FAT32 formatierten USB-Stick.
    638      Hinweis: Der USB Stick sollte nicht über Windows, sondern über ein separates Programm wie z.B. das "HP USB Disk Storage Format Tool" (Freeware Programm) formatiert werden.
    639      Des Weiteren empfehlen wir günstige USB Sticks mit einer geringen Speicherkapazität sowie Lese- und Schreibgeschwindigkeit.
    640  * Schalten Sie das Gerät aus.
    641  * USB Stick mit den zuvor kopierten "atemio" Ordner anschließen
    642  * Gerät einschalten (Netzstecker anschließen), das Image wir automatisch erkannt und mit dem Drücken Vol-Up Taste (dritte von links) wird die Installation des Image bestätigt,
    643    anschließend beginnt die Installation. Bitte warten bis die Installation vollständig abgeschlossen wurde.
    644      Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.
    645  * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen. Den USB Stick vorher entfernen.
    646 [[br]]
    647 [#point8 Top of Page]
    648 [[br]]
    649 ----
    650 '''8.081 Goldern interstar Xpeedlx1/2''' [=#point8.081]  ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    651 ----
    652 ''How do I install a Xpeedlx1/2 update image? ''
    653  * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
    654  * Extract the zip file
    655  * Now copy the unzipped firmware folder "xpeedlx3"  to a formatted FAT32 USB stick.
    656     Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
    657  * Turn off the Receiver and disconnect all USB devices.
    658  * Connect the USB stick with the update image file
    659  * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
    660 
    661 Note: If installation does not start, use a different USB stick.
    662 •After successfully installing the receiver will reboot and the installed image should start-up
    663 [[br]]
    664 [#point8 Top of Page]
    665 [[br]]
    666 ----
    667 '''8.082 goldern interstar Xpeedlx3''' [=#point8.082]  ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    668 ----
    669 ''How do I install a Xpeedlx3 update image? ''
    670  * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
    671  * Extract the zip file
    672  * Now copy the unzipped firmware folder "xpeedlx3" to a formatted FAT32 USB stick.
    673     Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
    674  * Turn off the Receiver and disconnect all USB devices.
    675  * Connect the USB stick with the update image file
    676  * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
    677 
    678 Note: If installation does not start, use a different USB stick.
    679 •After successfully installing the receiver will reboot and the installed image should start-up
    680 [[br]]
    681 [#point8 Top of Page]
    682 [[br]]
    683 ----
    684 '''8.091 Miraclebox Ultra''' [=#point8.091]  ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    685 ----
    686 '' How do I install an Miraclebox Ultra Update UBI image? ''
    687  * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
     375 * Gerät einschalten (Netzstecker anschließen) und drücken Sie die CH+ am Gerät (1 Taste von rechts) wenn es im Vfd (Lcd Display) des Gerätes angezeigt wird solange bis „Flashing...“ erscheint,
     376   anschließend beginnt die Installation. Erst danach die Taste loslassen
     377     Hinweis: Sollte die Installation nicht starten, verwenden Sie einen anderen USB Stick.
     378 * Nach der Installation bootet der Receiver neu und das Sendebild sollte erscheinen
     379[[br]]
     380[[br]]
     381[[br]]
     382
     383
     384'''Aditional Info'''
     385----
     386'''8.30 Instalation on other Fortis Recievers'''  [=#point8.30]([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
     387----
     388'''Instalation Notes:'''
     389
     390''If you wish to try or install TitanNit on a fortis based reciever you need to install Atemio/ Atevio factory loader, because of secutity installed in the bootloader one can not flash a loader from another fortis Reciever it will be rejected.''
     391
     392''If you wish to install TitanNit the loader version must be 1.54 or above titan versions above 1.32 require you to install the new Iboot loader.''
     393
     394''There is a few ways around this as explained below:''
     395 
     396[[br]]
     397
     398'''AAF Recovery Tool (ART) method'''
     399
     400 * Install the AAF Recovery Tool (ART) and set up a connection to your Reciever
     401 * Set the IP address and subnet mask of your uboot enviroment.
     402 * Reboot the decoder and reconect to make changes.
     403 * Install the factory loader and reboot.
     404 * You will have the factory loader version 1.21 you must now update to 1.54 to be compatable with TitanNit
     405
     406 * Visit the Atemio homepage or the AAF digital forum and download the latest Atevio/ Atemio loader (1.54).
    688407 * Extract the zip file
    689  * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
    690     Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
     408  * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
     409     Note: The USB stick should not be formatted with windows. Use a separate program, such as the
     410     " HP USB Disk Storage Format Tool" (freeware program).
    691411     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
    692412 * Turn off the Receiver and disconnect all USB devices.
    693413 * Connect the USB stick with the IRD file to your Receiver
    694  * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
    695    then the installation begins, Only then release the button.
    696     Note: If installation does not start , use a different USB stick.
    697  * After successfully installing the receiver will reboot and the installed image should start-up
    698 [[br]]
    699 [#point8 Top of Page]
    700 [[br]]
    701 ----
    702 '''8.092 Miraclebox Mini''' [=#point8.092]  ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    703 ----
    704 '' How do I install an Miraclebox Mini Update UBI image? ''
    705  * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
    706  * Extract the zip file
    707  * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
    708     Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
    709      Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
    710  * Turn off the Receiver and disconnect all USB devices.
    711  * Connect the USB stick with the IRD file to your Receiver
    712  * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
    713    then the installation begins, Only then release the button.
    714     Note: If installation does not start , use a different USB stick.
    715  * After successfully installing the receiver will reboot and the installed image should start-up
    716 [[br]]
    717 [#point8 Top of Page]
    718 [[br]]
    719 ----
    720 '''8.101 Sezam-Marvel''' [=#point8.101]  ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    721 ----
    722 ''How do I install a Sezam-Marvel  update image? ''
    723  * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
    724  * Extract the zip file
    725  * Now copy the unzipped firmware folder "enigma2" to a formatted FAT32 USB stick.
    726     Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
    727  * Turn off the Receiver and disconnect all USB devices.
    728  * Connect the USB stick with the update image file
    729  * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
    730 
    731 Note: If installation does not start, use a different USB stick.
    732 •After successfully installing the receiver will reboot and the installed image should start-up
    733 [[br]]
    734 [#point8 Top of Page]
    735 [[br]]
    736 ----
    737 '''8.102 Sezam-1000HD''' [=#point8.102]  ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    738 ----
    739 ''How do I install a Sezam-1000HD  update image? ''
    740  * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
    741  * Extract the zip file
    742  * Now copy the unzipped firmware folder "enigma2" to a formatted FAT32 USB stick.
    743     Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
    744  * Turn off the Receiver and disconnect all USB devices.
    745  * Connect the USB stick with the update image file
    746  * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
    747 
    748 Note: If installation does not start, use a different USB stick.
    749 •After successfully installing the receiver will reboot and the installed image should start-up
    750 [[br]]
    751 [#point8 Top of Page]
    752 [[br]]
    753 
    754 '''Aditional Info'''
    755 ----
    756 '''8.012 installation on other Fortis Receivers'''  [=#point8.012]  ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    757 ----
    758 '''Installation Notes:'''
    759 
    760 ''If you wish to try or install titan you need to install an Atemio/Atevio factory loader. The original Atemio Bootloader has a security code within so an installation of Titan is not possible with any other fortis loader''
    761 
    762 ''If you wish to install Titan the loader version must be 1.54 or above. Titan versions above 1.32 require the new Iboot loader which needs to be installed first if not present.''
    763 
    764 ''There are various ways that are explained below:''
    765  
    766 [[br]]
    767 
    768 '''AAF Recovery Tool (ART) method'''
    769 
    770  * Install the AAF Recovery Tool (ART) and set up a connection to your receiver
    771  * Set the IP address and subnet mask of your uboot environment.
    772  * Reboot the receiver and reconnect to change the settings.
    773  * Install the factory loader and reboot.
    774  * The factory loader you installed is version 1.21 that you have to update to 1.54 to be compatible with Titan
    775  * Visit the [http:((www-atemio.de Atemio] homepage or the [http://www.aaf-digital.info/forum AAF digital forum] and download the latest Atevio/Atemio loaader (1.54).
    776  * Extract the zip file
    777   * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
    778      Note: The USB stick should not be formatted with windows. Use a separate program, such as the
    779      "HP USB Disk Storage Format Tool" (freeware program).
    780      Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
    781  * Turn off the receiver and disconnect all USB devices.
    782  * Connect the USB stick with the IRD file to your receiver
    783414 * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
    784415   and the installation begins. Only then release the button
    785      Note: Should the installation not start, try a different USB stick.
    786  * Should you have installed the loader successfully the receiver will reboot and the installed Loader should start-up.
    787 
    788 ''You may now install Titan''
    789 [[br]]
    790 [#point8 Top of Page]
     416     Note: If installation does not start , use a different USB stick.
     417 * After successfully installing the receiver will reboot and the installed Loader should start-up
     418
     419''You may now install TitanNit''
     420[[br]]
     421
     422
    791423[[br]]
    792424
    793425'''Cross Flash Method'''
    794426
    795 ''This method explains how to install the HDF bootloader flash plugin to your fortis receiver and flash an Atemio/Atevio compatible bootloader from the plugin menu.''
    796 
    797 * Download the HDF Bootloader flash plugin from the [http://www.aaf-digital.info/forum AAF Digital forum].
     427''This method explains how to install the HDF bootloader flash plugin to your fortis decoder and flash an Atemio/ Atevio compatable boot loader from the plugin menu.''
     428
     429* Download the HDF Boot loader flash plugin from the [http://www.aaf-digital.info/forum/forum.php AAF Digital] forum.
    798430 * Extract the zip file
    799431 * Now copy the unzipped Plugin folder to a formatted FAT32 USB stick.
     
    801433     " HP USB Disk Storage Format Tool" (freeware program).
    802434     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
    803  * go to the plugins section in your receiver and install the plugin and then start it.
    804  * type in the password contained in the zip file and follow the onscreen prompts.
    805  * Should you have installed the loader successfully the receiver will reboot and the installed Loader should start-up.
     435 * go to the plugins section in your decoder and install the plugin and then start it.
     436 * type in the password contained in the zip file and follow the onscreen propmts.
     437 * After successfully installing the receiver will reboot and the installed bootLoader should start-up.
    806438
    807439''You may now install TitanNit''
    808 [[br]]
    809 [#point8 Top of Page]
     440
    810441[[br]]
    811442
    812443'''Reseller Changer Tool Method'''
    813444
    814 ''This method explains how to change the Reseler ID of an Atemio/Atevio compatible bootloader and flash it to any compatible Fortis receiver from the plugin menu.''
    815 
    816 
    817 * Visit the [http://www.atemio.de Atemio] homepage or the [http://www.aaf-digital.info/forum AAF digital forum] and download the latest Atevio/Atemio loader.
     445''This method explains how to change the Reseler ID of an Atemio/ Atevio compatable bootloader and flash it to any compatable Fortis receiver from the plugin menu.''
     446
     447
     448* Visit the Atemio homepage or the AAF digital forum and download the latest Atevio/ Atemio loader.
    818449 * Extract the zip file
    819450 * use the reseller ID changer tool and change the IRD to that of your reseller ID.
     
    823454     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
    824455 * Turn off the Receiver and disconnect all USB devices.
    825  * Connect the USB stick with the IRD file to your Receiver.
     456 * Connect the USB stick with the IRD file to your Receiver
    826457 * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears,
    827458   and the installation begins. Only then release the button
    828459     Note: If installation does not start , use a different USB stick.
    829  * Should you have installed the loader successfully the receiver will reboot and the installed Loader should start-up.
    830 
    831 
    832 This method requires you to also change the reseller ID to be able to install TitanNit.
    833 
    834 
    835 '''Be aware should it the installation fail or a loss of Power occur during the flashing process you could brick your receiver as there is no recovery method. Compatibility with other receivers is not guaranteed but you may find a list of compatible receivers in the [wiki:Supported-Receivers#point7 Supported Receivers] section.'''
    836 [[br]]
    837 [#point8 Top of Page]
    838 [[br]]
     460 * After successfully installing the receiver will reboot and the installed image should start-up
     461
     462
     463with this method it will require you to change the reseller ID also of the titan ird file IRD to be able to install TitanNit.
     464
     465
     466'''Be aware that this process if it goes wrong or the power goes off during flashing the loader there is no recovery method and don't blame us, compatibility is not guranteed with other decoders but you may find a list of compatable recievers in the [wiki:Supported-Recievers#point7 Supported Receivers] section.'''
     467[[br]]
     468
    839469----
    840 '''8.111 Uninstalling Titan''' [=#point8.111]  ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
    841 ----
    842 If you have an Atemio/Atevio or UFS receiver all you have to do is install your original ird file as explained above and no bootloader changes are neccessary.
    843 
    844 Uninstalling titan and switching back to the original reseller loader can't be done (easily) for other fortis receivers but there is one simple alternative method outlined below.
    845 
    846 
    847 '''Uninstalling Titan on non Atemio/Atevio receiver and restore Reseller ID with Maxi-uboot'''
    848 
    849 If you have iboot installed then you must install a version of TitanNit older than 1.32 before using this method.
    850 
    851 This will install the factory Atemio loader that is compatible with the AAF Recovery Tool (ART) to be able to install the Maxiuboot Loader.
    852 
    853 In order for this method to work make sure the setting Allow __"Iboot Update"__ is enabled in [wiki:Remote-Device-Control#point4.6 Iboot].
    854 
    855 When successfully achieved you may start up ART from your PC and install Maxiuboot.
    856 
    857 [[br]]
    858 
    859 Once installed you may set up your bootargs and change your Reseller ID back to its factory settings. For flashin original Firmware or other Software please refere to your receivers' manual or instructions.
    860 [[br]]
    861 [#point8 Top of Page]
    862 [[br]]
    863 
     470'''8.31 Uninstalling Titan''' [=#point8.31] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
     471----
     472If you have an Atemio/Atevio or ufs Receiver all you have to do is install your original ird file as explained above and no bootloader changes are nessesary.
     473
     474Uninstalling titan and switching back to the original reseller loader cant be done (easily) for other fortis decoders but there is one simple alternative method outlined below.
     475
     476
     477'''Uninstalling TitanNit on non Atemio/ Atevio Reciever and Restore Reseller ID with Maxiuboot'''
     478
     479If you have iboot installed then you must install a version of TitanNit below 1.32 before using this method.
     480
     481This will install the factory atemio loader that is compatible with the AAF Recovert Tool (ART) to be able to install the Maxiuboot Loader.
     482
     483But for this to work make sure the setting Allow __"Iboot Update"__ is enabled in [wiki:Remote-Device-Control#point4.6 Iboot].
     484
     485once this is done you may start up ART from your pc and install Maxiuboot.
     486
     487
     488Once it is installed you then can set up your bootargs and change your Reseller ID back to its factory setting, This is out side the scope of this wiki please read the manual included with the AAF Recovery Tool (ART) for more information on this process.
     489
     490[[br]]
    864491----   
    865 '''8.112 Update TitanNit''' [=#point8.112] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl]) 
     492'''8.32 Update TitanNit''' [=#point8.32] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl]) 
    866493----
    867494There are two ways to update your TitanNit version and there are merits to both methods :
    868495
    869 IRD offline method see [#point8 Installation / Recovery] and select your Reciever model to show information on how to update titan using an IRD titannit image.
     496IRD offline method see [#point8 Installation / Recovery Inhaltsverzeichnis] and select your Reciever model to show information on how to update titan using an IRD titannit image.
    870497[[br]]
    871498''Note: using this method plugins and files stored to Flash will be formatted when the update is proformed.
    872499Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .''
    873500
    874 Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.
     501Image Online Method see [wiki:System-Update#point3.5.7 System aktualisieren] for information on how preform an online update.
    875502[[br]]
    876503''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
    877 [[br]]
    878 [#point8 Top of Page]
     504
    879505[[br]]
    880 
    881506----   
    882 '''8.113 IRD Download Locations''' [=#point8.113] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl]) 
    883 ----
     507'''8.15 IRD Download Locations''' [=#point8.15] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl]) 
     508----  
    884509* [wiki:Manufactures#point13 13 Hersteller] - [http://atemio.de/index.php/software-updates Stable Images][[br]] 
    885 * [wiki:Community#point14 14 Community] - Download locations[http://atemio.dyndns.tv/nightly-images/ Index of /nightly-images][[br]] [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]] 
    886 [[br]]
    887 
    888   '''[wiki:Remote-Device-Control#point4.6 4.6 Bootloader sh4 Boxen]'''[[br]]
    889 * [http://sbnc.dyndns.tv/trac/wiki/de/Remote-Device-Control#point4.6  iboot sh4 flashen and recovery ][[br]]   
    890  
    891 [[br]]
    892 
    893  
    894 [#point8 Top of Page] 
    895 [[br]] 
     510* [wiki:Community#point14 14 Community] - [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]] 
     511[[br]]
     512
     513 
Note: See TracChangeset for help on using the changeset viewer.