>---- >'''3.5.1.1 Tuner Configuration''' [=#point3.5.1.1] ([wiki:Channel-Service#point3.5.1 Channel-Service (Back)]) > > >[[Image(source:/wiki/Wiki-Pictures/EN/Tuner-Configuration.jpg)]][[br]] > Here you can setup your tuner and proform a channel scan. [[br]] work in progress temp data: ||'''Tuner 0/0''' ||Select the conection method for tuner 0.|| ||'''Tuner 1/1''' ||Select the conection method for tuner 1.|| To __"Store"__ the settings Exit from the EPG Settings Menu by pressing __"OK"__ or press __"Exit"__ to cancel changes. '''Coloured Button's Functions''' The __"Coloured Buttons"__ along the bottom of the display bring up additional menus and options with in the Tuner configuration menu. Please see below for more info on the functions of these buttons:. ||'''Red Button: (Edit tuner)''' ||Edit the settings for the selected tuner please see ([#point103.50.1.2 advanced tuner settings menu]) for more info.|| ||'''Green Button: (Edit motor)''' ||Edit the motor settings for the selected tuner.|| >'''Advanced Tuner Settings Menu''' [=#point103.50.1.2] ||'''Satellite type''' ||Select the tuner to lnb connection method (Diseqc, Single or Expert.|| ||'''sat (number)''' ||select the satelite name connected.|| ||'''Diseqc:''' ||Select the port for the selected satellite.|| ||'''Lnb/ Unicable''' ||Bring up a the lnb settings for the selected satellite, select this item and press the red button set and adjust these settings see ([#point103.50.1.3 Advanced LNB settings menu]) for more info.|| >'''Advanced LNB Settings Menu''' [=#point103.50.1.3] ''This menu contains the advanced lnb settings'' ||'''Voltage Mode''' ||Selects the lnb voltage function.|| ||'''Tone Mode''' ||Selects the lnb tone function.|| ||'''LOF/ unicable''' ||select the lnb type and lnb frequency settings for it.|| '''Red Button: (Unicable manufacturer.''' select the unicable lnb manufacturer