---- '''8.051 SPARK''' [=#point8.050] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) ---- Spark is a reseller of the Fulan Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized hardware. '''SH4 Spark Contents''' * [#point8.051 8.051 SPARK (7111)] * [#point8.052 8.052 SPARK (7162)] '''Additional Info''' * [#point8.053 8.053 Uninstallation] * [#point8.054 8.054 Update TitanNit] * [#point8.055 8.055 IRD Download Location] ---- '''8.051 SPARK (7111)''' [=#point8.051] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) ---- '' How do I install a Spark (7111) Update Image? '' * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) * Extract the zip file * Copy the unzipped firmware update file to a formatted to FAT32 USB stick and copy the file e2jffs2.img and uImage into a folder called "enigma2" Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. * Turn off the device. * Connect the USB stick with the update file * hold the "OK" button and switch on the(mains plug) and hold it down (about 5 seconds) until "Forc" appears, then the installation will begin, when you see "U LD" in the display release the "OK" button. Note: If the installation does not start, use a different USB stick. * After installation "SUCC" appears in the display boot the receiver and the new image should appear. [[br]] [#point8.050 Top of Page] [[br]] ---- '''8.052 SPARK7162''' [=#point8.052] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) ---- '' How do I install a Spark (7162) Update Image? '' * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) * Extract the zip file * Copy the unzipped firmware update file to a formatted to FAT32 USB stick and copy the file e2jffs2.img and uImage into a folder called "enigma2" Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. * Turn off the device. * Connect the USB stick with the update file * hold the "OK" button and switch on the(mains plug) and hold it down (about 5 seconds) until "Forc" appears, then the installation will begin, when you see "U LD" in the display release the "OK" button. Note: If the installation does not start, use a different USB stick. * After installation "SUCC" appears in the display boot the receiver and the new image should appear. [[br]] [#point8.050 Top of Page] [[br]] ---- '''8.053 Uninstalling Titan''' [=#point8.053] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) ---- If you have an Atemio/Atevio or UFS receiver all you have to do is install your original ird file as explained above and no bootloader changes are neccessary. [[br]] [#point8.050 Top of Page] [[br]] ---- '''8.054 Update TitanNit''' [=#point8.054] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) ---- There are two ways to update your TitanNit version and there are merits to both methods : IRD offline method see [#point8 Installation / Recovery] and select your Receiver model to show information on how to update titan using an IRD TitanNit image. [[br]] ''Note: using this method plugins and files stored to Flash will be formatted when the update is preformed. Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .'' Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update. [[br]] ''Note: using this method all plugins and settings are retained as long as they are not installed in flash.'' [[br]] [#point8.050 Top of Page] [[br]] ---- '''8.055 IRD Download Locations''' [=#point8.055] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) ---- [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]] [[br]] [#point8.050 Top of Page] [[br]]