[[TranslatedPages]] ---- '''8.080 Goldern interstar Xpeedlx1/2''' [=#point8.080] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl]) ---- manufacturer blurb ---- '''8.081 Goldern interstar Xpeedlx1/2''' [=#point8.081] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl]) ---- ''How do I install a Xpeedlx1/2 update image? '' * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations]) * Extract the zip file * Now copy the unzipped firmware folder "xpeedlx3" to a formatted FAT32 USB stick. Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. * Turn off the Receiver and disconnect all USB devices. * Connect the USB stick with the update image file * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button. Note: If installation does not start, use a different USB stick. •After successfully installing the receiver will reboot and the installed image should start-up [[br]] [#point8 Top of Page] [[br]] ---- '''8.082 goldern interstar Xpeedlx3''' [=#point8.082] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl]) ---- ''How do I install a Xpeedlx3 update image? '' * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations]) * Extract the zip file * Now copy the unzipped firmware folder "xpeedlx3" to a formatted FAT32 USB stick. Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. * Turn off the Receiver and disconnect all USB devices. * Connect the USB stick with the update image file * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button. Note: If installation does not start, use a different USB stick. •After successfully installing the receiver will reboot and the installed image should start-up [[br]] [#point8 Top of Page] [[br]]