[[TranslatedPages]] ---- '''8.100 Sezam-Marvel''' [=#point8.100] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Sprachauswahl]) ---- manufacturer blurb.... ---- '''8.101 Sezam-Marvel''' [=#point8.101] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Sprachauswahl]) ---- ''How do I install a Sezam-Marvel update image? '' * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations]) * Extract the zip file * Now copy the unzipped firmware folder "enigma2" to a formatted FAT32 USB stick. Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. * Turn off the Receiver and disconnect all USB devices. * Connect the USB stick with the update image file * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button. Note: If installation does not start, use a different USB stick. •After successfully installing the receiver will reboot and the installed image should start-up [[br]] [#point8 Top of Page] [[br]] ---- '''8.102 Sezam-1000HD''' [=#point8.102] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Sprachauswahl]) ---- ''How do I install a Sezam-1000HD update image? '' * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations]) * Extract the zip file * Now copy the unzipped firmware folder "enigma2" to a formatted FAT32 USB stick. Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. * Turn off the Receiver and disconnect all USB devices. * Connect the USB stick with the update image file * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button. Note: If installation does not start, use a different USB stick. •After successfully installing the receiver will reboot and the installed image should start-up [[br]] [#point8 Top of Page] [[br]]