[[TranslatedPages]] ---- '''8.020 Homecast''' [=#point8.020] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) ---- Fortis is a Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized bootloaders to lock them to a specific sales region, TitanNit installation is possible after the installation of a Atevio compatible bootloader. '''SH4 Homecast Contents''' * [#point8.021 8.021 Homecast pro] '''Additional Info''' * [#point8.022 8.022 Uninstallation] * [#point8.023 8.025 Update TitanNit] * [#point8.024 8.024 IRD Download Location] ---- '''8.021 Homecast Pro''' [=#point8.021] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) ---- '' How do I install an Homecast UPDATEUSB Image? '' * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.2 IRD Download Locations]) * Extract the zip file * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick. Note: The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. * Turn off the Receiver and disconnect all USB devices. * Connect the USB stick with the IMG file to your Receiver * Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears, then the installation starts. Only then release the button Note: If installation does not start, use a different USB stick. * The installation is finished when DONE appears on the receiver. * Restart the machine after by the main switch again to . [[br]] [#point8 Top of Page] [[br]] ---- '''8.022 Uninstalling Titan''' [=#point8.022] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) ---- If you have an Homecast receiver all you have to do is install your original IMG file as explained above and no bootloader changes are necessary. [[br]] [#point8 Top of Page] [[br]] ---- '''8.023 Update TitanNit''' [=#point8.023] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) ---- There are two ways to update your TitanNit version and there are merits to both methods : IRD offline method see [#point8.020 Homecast Contents] and select your Receiver model to show information on how to update titan using an IRD TitanNit image. [[br]] ''Note: using this method plugins and files stored to Flash will be formatted when the update is preformed. Plugins and files installed to MNT or a valid configured storage device will retain there settings .'' Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update. [[br]] ''Note: using this method all plugins and settings are retained as long as they are not installed in flash.'' [[br]] [#point8 Top of Page] [[br]] ---- '''8.024 IRD Download Locations''' [=#point8.024] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) ---- * [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]] [[br]] [#point8 Top of Page] [[br]]