[[TranslatedPages]] ---- '''8.040 Kathrein''' [=#point8.040] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) ---- Fortis is a Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized bootloaders to lock them to a specific sales region, TitanNit installation is possible after the installation of a Atevio compatible bootloader. '''SH4 Fortis Contents''' * [#point8.041 8.041 Kathrein Ufs910] * [#point8.042 8.042 Kathrein Ufs912] * [#point8.043 8.043 Kathrein Ufs913] * [#point8.044 8.044 Kathrein Ufs922] * [#point8.045 8.045 Kathrein Ufs960] '''Additional Info''' * [#point8.046 8.06 Uninstallation] * [#point8.047 8.07 Update TitanNit] * [#point8.048 8.08 IRD Download Location] ---- '''8.041 Kathrein Ufs910''' [=#point8.041] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) ---- '' How do I install a Kathrein UFS910 update image? '' * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched. * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) * Extract the zip file * Now copy the unzipped img firmware file - must be renamed to miniFLASH.img - to a formatted FAT32 USB stick. Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. * Turn off the Receiver and disconnect all USB devices. * Connect the USB stick with the img file to the front USB Port * Switch on (mains switch) and at the same time hold the -Record button- on the Remote Control pressed (about 5 seconds) until "miniFLASH search..." appears, then the installation begins. Only then release the -Record button- Note: If installation does not start, use a different USB stick. * After successfully installing the receiver will reboot and the installed image should start-up [[br]] [#point8 Top of Page] [[br]] ---- '''8.042 Kathrein UFS912''' [=#point8.042] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) ---- '' How do I install a Kathrein UFS912 update image? '' * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) * Extract the zip file * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs912/ . Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. * Turn off the Receiver and disconnect all USB devices. * Connect the USB stick with the img file * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears, then the installation begins. Only after that message release the -TV/Radio button- Note: If installation does not start, use a different USB stick. * After successfully installing the receiver will reboot and the installed image should start-up [[br]] [#point8.1 Top of Page] [[br]] ---- '''8.043 Kathrein UFS913''' [=#point8.043] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) ---- '' How do I install a Kathrein UFS913 update image? '' * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched. * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) * Extract the zip file * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ . Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. * Turn off the Receiver and disconnect all USB devices. * Connect the USB stick with the img file * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears, then the installation begins. Only after that message release the -TV/Radio button- Note: If installation does not start, use a different USB stick. * After successfully installing the receiver will reboot and the installed image should start-up [[br]] [#point8.1 Top of Page] [[br]] ---- '''8.044 Kathrein UFS922''' [=#point8.044] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) ---- '' How do I install a Kathrein UFS922 update image? '' * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched. * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) * Extract the zip file * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ . Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. * Turn off the Receiver and disconnect all USB devices. * Connect the USB stick with the img file * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears, then the installation begins. Only after that message release the -TV/Radio button- Note: If installation does not start, use a different USB stick. * After successfully installing the receiver will reboot and the installed image should start-up [[br]] [#point8 Top of Page] [[br]] ---- '''8.045 Kathrein UFC960''' [=#point8.045] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) ---- '' How do I install a Kathrein UFS960 update image? '' * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched. * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) * Extract the zip file * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs960/ . Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. * Turn off the Receiver and disconnect all USB devices. * Connect the USB stick with the img file * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears, then the installation begins. Only after that message release the -TV/Radio button- Note: If installation does not start, use a different USB stick. * After successfully installing the receiver will reboot and the installed image should start-up [[br]] [#point8 Top of Page] [[br]] ---- '''8.046 Uninstalling Titan''' [=#point8.046] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) ---- If you have an Katherin UFS receiver all you have to do is install your original IMG file as explained above and no bootloader changes are neccessary. [[br]] [#point8 Top of Page] [[br]] ---- '''8.047 Update TitanNit''' [=#point8.047] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) ---- There are two ways to update your TitanNit version and there are merits to both methods : IRD offline method see [#point8 Ipbox contents] and select your Reciever model to show information on how to update titan using an IRD titannit image. [[br]] ''Note: using this method plugins and files stored to Flash will be formatted when the update is proformed. Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .'' Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update. [[br]] ''Note: using this method all plugins and settings are retained as long as they are not installed in flash.'' [[br]] [#point8 Top of Page] [[br]] ---- '''8.048 IRD Download Locations''' [=#point8.048] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) ---- [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]] [[br]] [#point8 Top of Page] [[br]]