Changes between Version 1 and Version 2 of de/Quick-Start-Guide
- Timestamp:
- 03/30/14 00:46:52 (8 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
de/Quick-Start-Guide
v1 v2 38 38 To set up the language of the interface go to menu the __"Menu"__ and select > __"Einstellungen"__ > __"Sprache"__ then select the language desired then the reciever will then reboot and restart with the new language settings. 39 39 40 [[Image(source:/wiki/Wiki-Pictures/ DE/Language.jpg)]][[BR]]40 [[Image(source:/wiki/Wiki-Pictures/EN/Language.jpg, 50%)]][[BR]] 41 41 [[br]] 42 42 [[br]] … … 47 47 To Set Up the Network Interface of the receiver go into the __"Menu"__ and select > __"System"__ > __"Network"__ 48 48 49 [[Image(source:/wiki/Wiki-Pictures/ DE/system-Network.jpg)]][[BR]]49 [[Image(source:/wiki/Wiki-Pictures/EN/system-Network.jpg, 50%)]][[BR]] 50 50 51 51 If you wish to setup a wired network select __"LAN Interface Setup"__ and press the red button. … … 63 63 If you have just purchased your receiver or converted from the manufactures included software the hdd will need formatting and setting up for use with TitanNit. 64 64 65 To format the Hdd of the receiver to be able to be used with TitanNit go into the __"Menu"__ and select > __"System"__ > __"Storage Device"__ and select __"format Device"__ and follow the on screen propmts. (Note: doing this will remove all content on the hdd if you have important data on there please back it up before preforming this step.) 65 To format the Hdd of the receiver to be able to be used with TitanNit go into the __"Menu"__ and select > __"System"__ > __"Storage Device"__ and select __"format Device"__ then select the hdd you wish to format. (Note: doing this will remove all content on the hdd if you have important data on there please back it up before preforming this step.) 66 67 you will then need to select the type of file system you wish to use on the hdd if you have no idea what to pick leave it as default, select an item and press the __"OK"__ button. 68 69 [[Image(source:/wiki/Wiki-Pictures/EN/Format-Hdd.jpg, 50%)]] 66 70 67 71 Now that the Hdd is formatted you may set it up, go into the __"Menu"__ and select > __"System"__ > __"Storage Device"__ and select __"Configure device"__ 68 72 69 Select the Hdd and then you will be presented with a set of features to enable the hard disk to be used for.73 Select the Hdd you formatted before and and then you will be presented with a set of features to enable the hard disk to be used for. 70 74 I suggest you enable all options. 71 75 [[br]] … … 80 84 As no two systems are the same we will show you how to set up a simple single universal lnb connected to your reciever with a list of satellites in your sky you wish to receive. 81 85 82 Before we can do this we need to program in our lists of satellites as not all satellite lists are installed in the Reciever by default.86 Before we can do this we need to program in a list of satellites and transponders as not all satellite lists are installed in the Reciever by default. 83 87 84 88 ''Setting up the Satellite lists'' … … 88 92 89 93 * Download a satellite xml file for the satellites you wish to receive from an [[http://satellites-xml.eu/ | Online xml generator]] 90 * Download and install [wiki:External-Software-SatChannelListEditor#point9.3 SatChannelListEditor] to your pc 91 * Import the xml file and transfer it to your reciever. 92 93 The reciever will then reboot if it does not then reboot manually. 94 * Download and install [wiki:External-Software-SatChannelListEditor#point9.3 SatChannelListEditor] to your pc and set up a connection to your receiver. 95 * Import the xml file. 96 97 [[Image(source:/wiki/Wiki-Pictures/EN/SCLE/Import-Satellite.png)]] 98 99 * Upload the satellite.xml file to your receiver 100 101 [[Image(source:/wiki/Wiki-Pictures/EN/SCLE/6.png)]] 102 103 The reciever will then reboot if it does not then reboot manually to comit the changes. 94 104 95 105 ''Setting up the tuner'' … … 118 128 119 129 To Proforming a Scan of the receiver go into the __"Menu"__ and select > __"System"__ > __"Channel Service"__ >__"Automatic Search"__ and press the __"Red Button"__ as you have already setup your satellites and transponders the default settings will be ok. 130 131 [[Image(source:/wiki/Wiki-Pictures/EN/Automatic-Search.jpg, 50%)]] 132 133 Once the scan has finished you may press the __"Green"__ button to store all the channel data or alternativly you may select the individual channels and press the __"Red"__ button. 134 120 135 [[br]] 121 136 [[br]] … … 130 145 * load up the software on your PC and read in the channel data as follows : 131 146 132 [[Image(source:/wiki/Wiki-Pictures/ DE/SCLE/6.png)]]133 134 [[Image(source:/wiki/Wiki-Pictures/ DE/SCLE/7.png)]]147 [[Image(source:/wiki/Wiki-Pictures/EN/SCLE/6.png)]] 148 149 [[Image(source:/wiki/Wiki-Pictures/EN/SCLE/7.png)]] 135 150 136 151 … … 143 158 [[BR]] Create new favourites by clicking the right mouse button within the tree of favourites: 144 159 145 [[Image(source:/wiki/Wiki-Pictures/ DE/SCLE/8.png)]]160 [[Image(source:/wiki/Wiki-Pictures/EN/SCLE/8.png)]] 146 161 147 162 After creating the new Favourites entry assign the desired Name: 148 163 149 [[Image(source:/wiki/Wiki-Pictures/ DE/SCLE/9.png)]]164 [[Image(source:/wiki/Wiki-Pictures/EN/SCLE/9.png)]] 150 165 151 166 You may now add channels to your favourites by drag & drop of the channels[[br]] … … 153 168 and selecting Add to Favourites and selecting the Favourites Entry from the drop-down-menu: 154 169 155 [[Image(source:/wiki/Wiki-Pictures/ DE/SCLE/10.png)]]170 [[Image(source:/wiki/Wiki-Pictures/EN/SCLE/10.png)]] 156 171 157 172 Once a channel has been added to the favourites, a channel number is assigned.[[br]] 158 173 The first channel in the first favourites is channel number 1: 159 174 160 [[Image(source:/wiki/Wiki-Pictures/ DE/SCLE/11.png)]]175 [[Image(source:/wiki/Wiki-Pictures/EN/SCLE/11.png)]] 161 176 162 177 When a channel is assigned to more than one favourites list, it additionally[[br]] 163 178 obtains further channel numbers: 164 179 165 [[Image(source:/wiki/Wiki-Pictures/ DE/SCLE/12.png)]]180 [[Image(source:/wiki/Wiki-Pictures/EN/SCLE/12.png)]] 166 181 [[br]] 167 182 [[br]] … … 172 187 To Set up a media source to be acessable from the reciever of the receiver go into the __"Menu"__ and select > __"System"__ > __"Network"__> __"Network Browser"__ 173 188 174 [[Image(source:/wiki/Wiki-Pictures/DE/Network-Browser.jpg)]][[br]] 189 [[Image(source:/wiki/Wiki-Pictures/EN/Network-Browser.jpg, 50%)]][[br]] 190 191 now press the __"Red"__ button to add a source and you will be presented with a list of share options. 192 set up your share type adress and details for your media server and press __OK"__ to store it in. 193 194 your share will now be mounted and it will now show up in the media/net/ directory 195 175 196 [[br]] 176 197 [[br]] … … 180 201 ---- 181 202 To Play back a media file or recording it is very simple, to open the default media player press the __"PLAY"__ button and you will be presented with the player file select display, Navigate the file list and select the file you wish to play. 182 183 [[Image(source:/wiki/Wiki-Pictures/DE/Internal-Player-OSD.jpg)]] [[br]] 203 You may play media from your network share by browsing to the media/net if you wish. 204 205 [[Image(source:/wiki/Wiki-Pictures/EN/Internal-Player-OSD.jpg, 50%)]][[br]] 184 206 [[br]] 185 207 [[br]] … … 210 232 211 233 Oh and by the way as a final remark thanks for choosing TitanNit!. 212 213 214 215 216 217 [[br]] 218 [[br]] 234 [[br]] 235 [[br]]
