17 | | * [#point8.6 8.6 Atemio5200 and compatible Models] |
18 | | * [#point8.8 8.8 Ufs910] |
19 | | * [#point8.9 8.9 Ufs912] |
20 | | * [#point8.10 8.10 Ufs922] |
21 | | * [#point8.11 8.11 Installation on other Fortis Receivers] |
22 | | * [#point8.12 8.12 Uninstallation On other Fortis Receivers] |
23 | | * [#point8.13 8.13 Update TitanNit] |
24 | | * [#point8.14 8.14 IRD Download Location] |
25 | | |
26 | | |
27 | | [[br]] |
28 | | |
29 | | |
| 17 | * [#point8.8 8.7 Ufs910] |
| 18 | * [#point8.9 8.8 Ufs912] |
| 19 | * [#point8.10 8.9 Ufs922] |
| 20 | |
| 21 | '''MIPS Models''' |
| 22 | |
| 23 | * [#point8.14 8.10 Atemio5000] |
| 24 | * [#point8.15 8.11 Atemio5200] |
| 25 | |
| 26 | '''Aditional Info''' |
| 27 | |
| 28 | * [#point8.11 8.12 Installation on other Fortis Receivers] |
| 29 | * [#point8.12 8.13 Uninstallation On other Fortis Receivers] |
| 30 | * [#point8.13 8.14 Update TitanNit] |
| 31 | * [#point8.14 8.15 IRD Download Location] |
| 32 | [[br]] |
| 33 | [[br]] |
| 34 | [[br]] |
| 35 | |
| 36 | |
| 37 | '''SH4 Models''' |
37 | | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . |
38 | | * Extract the zip file |
39 | | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
40 | | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
41 | | " HP USB Disk Storage Format Tool" (freeware program). |
42 | | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
43 | | * Turn off the Receiver and disconnect all USB devices. |
44 | | * Connect the USB stick with the IRD file to your Receiver |
45 | | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, |
46 | | and the installation begins. Only then release the button |
47 | | Note: If installation does not start , use a different USB stick. |
48 | | * After successfully installing the receiver will reboot and the installed image should start-up |
49 | | [[br]] |
50 | | [#point8.1 Top of Page] |
| 42 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| 43 | * Extract the zip file |
| 44 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| 45 | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| 46 | " HP USB Disk Storage Format Tool" (freeware program). |
| 47 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| 48 | * Turn off the Receiver and disconnect all USB devices. |
| 49 | * Connect the USB stick with the IRD file to your Receiver |
| 50 | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, |
| 51 | and the installation begins. Only then release the button |
| 52 | Note: If installation does not start , use a different USB stick. |
| 53 | * After successfully installing the receiver will reboot and the installed image should start-up |
| 54 | [[br]] |
| 55 | [#point8.1 Top of Page] |
| 56 | [[br]] |
| 57 | |
79 | | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . |
80 | | * Extract the zip file |
81 | | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
82 | | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
83 | | " HP USB Disk Storage Format Tool" (freeware program). |
84 | | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
85 | | * Turn off the Receiver and disconnect all USB devices. |
86 | | * Connect the USB stick with the IRD file to your Receiver |
87 | | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, |
88 | | and the installation begins. Only then release the button |
89 | | Note: If installation does not start , use a different USB stick. |
90 | | * After successfully installing the receiver will reboot and the installed image should start-up |
91 | | [[br]] |
92 | | [#point8.1 Top of Page] |
| 81 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| 82 | * Extract the zip file |
| 83 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| 84 | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| 85 | " HP USB Disk Storage Format Tool" (freeware program). |
| 86 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| 87 | * Turn off the Receiver and disconnect all USB devices. |
| 88 | * Connect the USB stick with the IRD file to your Receiver |
| 89 | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, |
| 90 | and the installation begins. Only then release the button |
| 91 | Note: If installation does not start , use a different USB stick. |
| 92 | * After successfully installing the receiver will reboot and the installed image should start-up |
| 93 | [[br]] |
| 94 | [#point8.1 Top of Page] |
| 95 | [[br]] |
100 | | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . |
101 | | * Extract the zip file |
102 | | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
103 | | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
104 | | " HP USB Disk Storage Format Tool" (freeware program). |
105 | | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
106 | | * Turn off the Receiver and disconnect all USB devices. |
107 | | * Connect the USB stick with the IRD file to your Receiver |
108 | | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, |
109 | | and the installation begins. Only then release the button |
110 | | Note: If installation does not start , use a different USB stick. |
111 | | * After successfully installing the receiver will reboot and the installed image should start-up |
112 | | [[br]] |
113 | | [#point8.1 Top of Page] |
| 101 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| 102 | * Extract the zip file |
| 103 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| 104 | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| 105 | " HP USB Disk Storage Format Tool" (freeware program). |
| 106 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| 107 | * Turn off the Receiver and disconnect all USB devices. |
| 108 | * Connect the USB stick with the IRD file to your Receiver |
| 109 | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, |
| 110 | and the installation begins. Only then release the button |
| 111 | Note: If installation does not start , use a different USB stick. |
| 112 | * After successfully installing the receiver will reboot and the installed image should start-up |
| 113 | [[br]] |
| 114 | [#point8.1 Top of Page] |
| 115 | [[br]] |
118 | | |
119 | | [[br]] |
120 | | |
121 | | '' How do I install an Atemio 700 IRD image? '' |
122 | | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . |
123 | | * Extract the zip file |
124 | | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
125 | | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
126 | | " HP USB Disk Storage Format Tool" (freeware program). |
127 | | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
128 | | * Turn off the Receiver and disconnect all USB devices. |
129 | | * Connect the USB stick with the IRD file to your Receiver |
130 | | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, |
131 | | and the installation begins. Only then release the button |
132 | | Note: If installation does not start , use a different USB stick. |
133 | | * After successfully installing the receiver will reboot and the installed image should start-up |
134 | | [[br]] |
135 | | [#point8.1 Top of Page] |
| 120 | '' How do I install an Atemio 7600 IRD image? '' |
| 121 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| 122 | * Extract the zip file |
| 123 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| 124 | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| 125 | " HP USB Disk Storage Format Tool" (freeware program). |
| 126 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| 127 | * Turn off the Receiver and disconnect all USB devices. |
| 128 | * Connect the USB stick with the IRD file to your Receiver |
| 129 | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, |
| 130 | and the installation begins. Only then release the button |
| 131 | Note: If installation does not start , use a different USB stick. |
| 132 | * After successfully installing the receiver will reboot and the installed image should start-up |
| 133 | [[br]] |
| 134 | [#point8.1 Top of Page] |
| 135 | [[br]] |
144 | | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . |
145 | | * Extract the zip file |
146 | | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
147 | | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
148 | | " HP USB Disk Storage Format Tool" (freeware program). |
149 | | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
150 | | * Turn off the Receiver and disconnect all USB devices. |
151 | | * Connect the USB stick with the IRD file to your Receiver |
152 | | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, |
153 | | and the installation begins. Only then release the button |
154 | | Note: If installation does not start , use a different USB stick. |
155 | | * After successfully installing the receiver will reboot and the installed image should start-up |
156 | | [[br]] |
157 | | [#point8.1 Top of Page] |
158 | | |
159 | | ---- |
160 | | '''8.7 Atevio5200''' [=#point8.7] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
161 | | ---- |
162 | | |
163 | | [[br]] |
164 | | |
165 | | '' How do I install an Atemio 5200 image? '' |
166 | | |
167 | | Currently we dont have this information available and will be updated in the future to reflect this |
168 | | |
169 | | [[br]] |
170 | | [#point8.1 Top of Page] |
171 | | |
172 | | |
173 | | ---- |
174 | | '''8.8 Kathrein Ufs910''' [=#point8.8] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
175 | | ---- |
176 | | |
177 | | [[br]] |
178 | | |
| 141 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| 142 | * Extract the zip file |
| 143 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| 144 | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| 145 | " HP USB Disk Storage Format Tool" (freeware program). |
| 146 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| 147 | * Turn off the Receiver and disconnect all USB devices. |
| 148 | * Connect the USB stick with the IRD file to your Receiver |
| 149 | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, |
| 150 | and the installation begins. Only then release the button |
| 151 | Note: If installation does not start , use a different USB stick. |
| 152 | * After successfully installing the receiver will reboot and the installed image should start-up |
| 153 | [[br]] |
| 154 | [#point8.1 Top of Page] |
| 155 | [[br]] |
| 156 | |
| 157 | ---- |
| 158 | '''8.7 Kathrein Ufs910''' [=#point8.7] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| 159 | ---- |
240 | | |
241 | | |
242 | | ---- |
243 | | '''8.11 installation on other Fortis Receivers''' [=#point8.11] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
244 | | ---- |
245 | | |
246 | | [[br]] |
247 | | |
| 217 | [[br]] |
| 218 | [[br]] |
| 219 | [[br]] |
| 220 | |
| 221 | '''Mips Models''' |
| 222 | ---- |
| 223 | '''8.10 Atevio5000''' [=#point8.10] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| 224 | ---- |
| 225 | '' How do I install an Atemio 5000 Update UBI image? '' |
| 226 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| 227 | * Extract the zip file |
| 228 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| 229 | Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). |
| 230 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| 231 | * Turn off the Receiver and disconnect all USB devices. |
| 232 | * Connect the USB stick with the IRD file to your Receiver |
| 233 | * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...". |
| 234 | then the installation begins, Only then release the button. |
| 235 | Note: If installation does not start , use a different USB stick. |
| 236 | * After successfully installing the receiver will reboot and the installed image should start-up |
| 237 | [[br]] |
| 238 | [#point8.1 Top of Page] |
| 239 | [[br]] |
| 240 | |
| 241 | ---- |
| 242 | '''8.11 Atevio5200''' [=#point8.11] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| 243 | ---- |
| 244 | '' How do I install an Atemio 5200 Update UBI image? '' |
| 245 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| 246 | * Extract the zip file |
| 247 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| 248 | Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). |
| 249 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| 250 | * Turn off the Receiver and disconnect all USB devices. |
| 251 | * Connect the USB stick with the IRD file to your Receiver |
| 252 | * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...". |
| 253 | then the installation begins, Only then release the button. |
| 254 | Note: If installation does not start , use a different USB stick. |
| 255 | * After successfully installing the receiver will reboot and the installed image should start-up |
| 256 | [[br]] |
| 257 | [#point8.1 Top of Page] |
| 258 | [[br]] |
| 259 | [[br]] |
| 260 | [[br]] |
| 261 | |
| 262 | |
| 263 | '''Mips Models'''---- |
| 264 | '''8.12 installation on other Fortis Receivers''' [=#point8.12] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| 265 | ---- |