| 5 | | == Quick Start Guide == |
| 6 | | |
| 7 | | This section contains information about the on screen menus within TitanNit and discriptions to the various |
| 8 | | items and their functions aswell as helpfull information and tricks to get the most possible experience with your Receiver. |
| 9 | | |
| 10 | | Note: pictures in this area only apply to the default skin used in Titan. |
| 11 | | If you do not see a specific menu item on the display please select the default skin from the menu as follows: |
| 12 | | |
| 13 | | Press the __"Menu"__ button and select __"Settings"__ scroll down to __"Skin"__ and select the __"Default"__ Skin from the menu. |
| 14 | | The decoder will then reboot with the new selected __Default__ skin. |
| 15 | | |
| 16 | | --- |
| 17 | | |
| 18 | | '''Welcome to TitanNit!''' |
| 19 | | |
| 20 | | |
| 21 | | Congratulations new users to your choice in your new Atemio Receiver or on the instalation of TitanNit onto your exising receiver: The TitanNit interface is designed with the 'Home Theater' in mind. This means it is best viewed on a large-screen TV while you sit on your couch 10-feet away from the TV, If it helps, you can think of TitanNit as the ultimate media player/Set-top-box, rather than just another set top box operating system. |
| 22 | | |
| 23 | | ''First Steps'' |
| 24 | | ---- |
| 25 | | '''Setting up the main Features''' |
| 26 | | |
| | 5 | |
| 28 | | this section was designed for those who do not care to ever read the manual and just want to jump in and get their hands dirty in all that is TitanNit. |
| 29 | | |
| 30 | | |
| 31 | | |
| 32 | | * ([#point0.1 Setting the language]) |
| | 7 | This section was designed for those who do not care to ever read the manual and just want to jump in and get their hands dirty in all that is TitanNit. |
| | 8 | |
| | 9 | Note: it is asumed the decoder has just been freshly removed from the packing or freshly had TitanNit installed and is booted with the default settings if you wish to install TitanNit please see the section [wiki:Installation-Recovery#point8 Installation and Recovery Contents] |
| | 10 | |
| | 11 | ---- |
| | 12 | ''' Welcome to TitanNit! ''' |
| | 13 | ---- |
| | 14 | |
| | 15 | Congratulations new users to your choice in your new Atemio Receiver or on the instalation of TitanNit onto your exising receiver. The TitanNit interface is designed with the 'Home Theater' in mind. This means it is best viewed on a large-screen TV while you sit on your couch 10-feet away from the TV, If it helps, you can think of TitanNit as the ultimate media player/Set-top-box, rather than just another set top box operating system. |
| | 16 | |
| | 17 | ---- |
| | 18 | '''Setting up the Main Features''' |
| | 19 | ---- |
| | 20 | |
| | 21 | * ([#point0.1 Setting Up the language]) |
| 56 | | [[br]] |
| 57 | | [[br]] |
| 58 | | |
| | 48 | |
| | 49 | [[Image(source:/wiki/Wiki-Pictures/EN/system-Network.jpg)]][[BR]] |
| | 50 | |
| | 51 | If you wish to setup a wired network select __"LAN Interface Setup"__ and press the red button. |
| | 52 | you will then be presented with a list of network settings, set up your reciever as required and press __"OK"__ and follow the on screen propmts. |
| | 53 | |
| | 54 | If you wish to setup a wireless network select __"WLAN"__ |
| | 55 | if your sever is sending out a ssid you may press the __"Red button"__ and preform a scan of available networks, select your network and press ok to save. |
| | 56 | you will then need to set your security type and key using the remote and press the __"green button"__ to start the network connection. |
| | 57 | [[br]] |
| | 58 | [[br]] |
| 65 | | To Set Up the Hdd of the receiver to be used for swap, extentions, recordings and media go into the __"Menu"__ and select > __"System"__ > __"Hdd"__ |
| | 65 | To format the Hdd of the receiver to be able to be used with TitanNit go into the __"Menu"__ and select > __"System"__ > __"Storage Device"__ and select __"format Device"__ and follow the on screen propmts. (Note: doing this will remove all content on the hdd if you have important data on there please back it up before preforming this step.) |
| | 66 | |
| | 67 | Now that the Hdd is formatted you may set it up, go into the __"Menu"__ and select > __"System"__ > __"Storage Device"__ and select __"Configure device"__ |
| | 68 | |
| | 69 | Select the Hdd and then you will be presented with a set of features to enable the hard disk to be used for. |
| | 70 | I suggest you enable all options. |
| | 98 | |
| | 99 | * 1 Select tuner 0/0 and press the sideways key and select __"Tuner looped to 0/1"__ |
| | 100 | * 2 Select tuner 0/1 and press the sideways key and select __"Tuner looped to 0/0"__ |
| | 101 | * 3 Select tuner 0/0 and press the __"Red Button"__ to configuere the tuner |
| | 102 | * 4 Select the satellite type press sideways and select __"Single Lnb"__. |
| | 103 | * 5 Scroll down and select __"SAT 1"__ press the sideways key and select the satellite you wish to receive. |
| | 104 | * 6 Scroll down to Lnb/Unicable and press the __"Red Button"__ to configure the lnb type. |
| | 105 | * 7 scroll down to LOF/Unicable press the sideways key and select universal. |
| | 106 | * 8 Press ok button twice to store the lnb type and tuner configuration. |
| | 107 | * Repeat steps 4-8 on tuner 0/1 |
| | 108 | |
| | 109 | your lnb is now set up and if all was done correctly you should now be able to scan for stations on the selected satellite. |
| | 110 | [[br]] |
| 108 | | but they are un orginised and it may be hard finding the tv stations you wish to watch for this you can orginise them in to your own persionalised favourite menu's. |
| 109 | | |
| 110 | | the easyiest way to do this is with the [wiki:External-Software-SatChannelListEditor#point9.3 SatChannelListEditor]that you installed previously. |
| 111 | | |
| 112 | | * First load up the software on your pc and read in the channel data. |
| 113 | | |
| 114 | | == Favourites setup == |
| | 127 | but as you may notice they are un orginised and it may be hard finding the tv stations you wish to watch for this you can orginise them in to your own persionalised favourite menu's. |
| | 128 | The easyest way to do this is with the [wiki:External-Software-SatChannelListEditor#point9.3 SatChannelListEditor]that you installed previously. |
| | 129 | |
| | 130 | * load up the software on your PC and read in the channel data as follows : |
| | 131 | |
| | 132 | [[Image(source:/wiki/Wiki-Pictures/EN/SCLE/6.png)]] |
| | 133 | |
| | 134 | [[Image(source:/wiki/Wiki-Pictures/EN/SCLE/7.png)]] |
| | 135 | |
| | 136 | |
| | 137 | '' Favourites setup '' |
| 147 | | '''Setting up a Media Source''' [=#point0.7] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| 148 | | ---- |
| 149 | | [[br]] |
| 150 | | [[br]] |
| 151 | | |
| 152 | | ---- |
| 153 | | '''Playing Back media''' [=#point0.8] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| 154 | | ---- |
| | 170 | '''Setting Up a Media Source''' [=#point0.7] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| | 171 | ---- |
| | 172 | To Set up a media source to be acessable from the reciever of the receiver go into the __"Menu"__ and select > __"System"__ > __"Network"__> __"Network Browser"__ |
| | 173 | |
| | 174 | [[Image(source:/wiki/Wiki-Pictures/EN/Network-Browser.jpg)]][[br]] |
| | 175 | [[br]] |
| | 176 | [[br]] |
| | 177 | |
| | 178 | ---- |
| | 179 | '''Playing Back Media''' [=#point0.8] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| | 180 | ---- |
| | 181 | To Play back a media file or recording it is very simple, to open the default media player press the __"PLAY"__ button and you will be presented with the player file select display, Navigate the file list and select the file you wish to play. |
| | 182 | |
| | 183 | [[Image(source:/wiki/Wiki-Pictures/EN/Internal-Player-OSD.jpg)]] [[br]] |
| 171 | | [[br]] |
| 172 | | [[br]] |
| | 200 | Please see below for more advanced topics and information |
| | 201 | |
| | 202 | * [wiki:Interface-Operation#point3 3 Interface and Operation] |
| | 203 | * [wiki:Remote-Device-Control#point3.9 4.0 Remote/ Device Control] |
| | 204 | * [wiki:Installation-Recovery#point8 8 Installation / Recovery] |
| | 205 | * [wiki:External-Software#point9 9 External Software] |
| | 206 | * [wiki:Plugins-Contents#point10 10 Plugins] |
| | 207 | * [wiki:Troubleshooting#point12 12 Troubleshooting] |
| | 208 | |
| | 209 | We have tried our best to make this quick start manual as complete and precice as we can if you have any issuies with this manual, wish for something to be added, thank or abuse us please see [wiki:Community#point14 14 Community] for information on how to contact us. |
| | 210 | |
| | 211 | Oh and by the way as a final remark thanks for choosing TitanNit!. |
| | 212 | |
| | 213 | |
| | 214 | |
| | 215 | |
| | 216 | |
| | 217 | [[br]] |
| | 218 | [[br]] |
