Altre lingue:
- English
- français
- Ελληνικά
- italiano
- Nederlands
- polski
- русский
- Tiếng Việt
8.061 Mips Atemio (Contents) (Main page)
manufacturer blurb.....
8.061 Atemio-Nemesis (Contents) (Main page)
How do I install an Atemio 5000 Update UBI image?
- Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . (IRD Download Locations)
- Extract the zip file
- Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
- Turn off the Receiver and disconnect all USB devices.
- Connect the USB stick with the IRD file to your Receiver
- Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...". then the installation begins, Only then release the button.
Note: If installation does not start , use a different USB stick.
- After successfully installing the receiver will reboot and the installed image should start-up
8.062 Atemio5200 (Contents) (Main page)
How do I install an Atemio 5200 Update UBI image?
- Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . (IRD Download Locations)
- Extract the zip file
- Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
- Turn off the Receiver and disconnect all USB devices.
- Connect the USB stick with the IRD file to your Receiver
- Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...". then the installation begins, Only then release the button.
Note: If installation does not start , use a different USB stick.
- After successfully installing the receiver will reboot and the installed image should start-up
8.063 Atemio6000 (Contents) (Main page)
How do I install an Atemio 6000 Update UBI image?
- Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . (IRD Download Locations)
- Extract the zip file
- Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
- Turn off the Receiver and disconnect all USB devices.
- Connect the USB stick with the IRD file to your Receiver
- Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...". then the installation begins, Only then release the button.
Note: If installation does not start , use a different USB stick.
- After successfully installing the receiver will reboot and the installed image should start-up
8.064 Atemio6100 (Contents) (Main page)
How do I install an Atemio 6100 Update UBI image?
- Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . (IRD Download Locations)
- Extract the zip file
- Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
- Turn off the Receiver and disconnect all USB devices.
- Connect the USB stick with the IRD file to your Receiver
- Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...". then the installation begins, Only then release the button.
Note: If installation does not start , use a different USB stick.
- After successfully installing the receiver will reboot and the installed image should start-up
8.065 Atemio6200 (Contents) (Main page)
How do I install an Atemio 6200 Update UBI image?
- Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . (IRD Download Locations)
- Extract the zip file
- Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
- Turn off the Receiver and disconnect all USB devices.
- Connect the USB stick with the IRD file to your Receiver
- Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...". then the installation begins, Only then release the button.
Note: If installation does not start , use a different USB stick.
- After successfully installing the receiver will reboot and the installed image should start-up