wiki:it/Installation-Recovery-SH4-Fortis

Version 1 (modified by trac, 3 years ago) (diff)

--



Altre lingue:

SH4 Fortis (hardware profile)

Fortis is a Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized bootloaders to lock them to a specific sales region, TitanNit installation is possible after the installation of a Atevio compatible bootloader.

SH4 Fortis Contents

Additional Info

SH4 Fortis based clone receiver detection based on hardware profile

As it is virtually impossible to list every fortis clone box on this wiki and data would be repeated over and over again it is broken up into harware revisions to compair that to the atevio model of that box. This list will help you select the correct image and bootloader for your clone reciever below is a specifications list check the back of your manual included with your receiver and look at the table below to select the correct hardware model. See here for a full list of known Fortis (Supported Receivers)

Model SystemTunerCPURAMROM (Flash)USBPVR FunktionCardReaderCommon interfaceDisplayWidthfeatures
Fortis FS-9000 HD PVRDVB-S/S2 2STI_7101 266 Mhz192MB32MB2Internal 2.5 or 3.5 SATA, external via USB1 (*2)212-digit 5x7matrix43 cm
Fortis FS-9200 HD PVRDVB-S/S2 2STI_7101 266 Mhz192MB32MB2eSATA & USB1 (*2)212-digit 5x7matrix34 cm
Fortis HS-9510DVB-S/S2 1STI_7101 266 Mhz192MB32MB1USB1 (*2)28-digit 14segment34 cm
Fortis HX-8200 HD PVRDVB-S/S2, DVB-T2, DVB-C 1/2STI_7105 450 Mhz256MB64MB3Internal 2,5´´SATA-HDD external via eSATA + USB2212-digit 5x7matrix34 cmPlug&Play Tuner, Youtube, Browser, FreeTV+
Fortis HS-7810 HD PVRDVB-S/S2 1STI_7110 450 Mhz256MB32MB2USB124-digit 7segment26 cmYouTube, Browser, FreeTV+

NOTE:

  • The Fortis HS-7810 is a clone of the Atemio510/520 Models
  • The Fortis HX-8200 is a clone of the Atemio7600 Model
  • The Fortis HS-9510 is a clone of the Atemio700 clone Model
  • The Fortis FS-9000/Fortis FS-9200 is a clone of the Atemio7000 Models


Top of Page

8.1 Fortis HS-7810 (Atemio510) (Contents) (Main page)

How do I install an Atemio 510 IRD image?

  • Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . (IRD Download Locations)
  • Extract the zip file
  • Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.

Note: The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.

  • Turn off the Receiver and disconnect all USB devices.
  • Connect the USB stick with the IRD file to your Receiver
  • Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, and the installation begins. Only then release the button

Note: If installation does not start , use a different USB stick.

  • After successfully installing the receiver will reboot and the installed image should start-up


Top of Page

8.4 Fortis HX-8200 (Atemio7600) (Contents) (Main page)

How do I install an Atemio 7600 IRD image?

  • Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . (IRD Download Locations)
  • Extract the zip file
  • Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.

Note: The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.

  • Turn off the Receiver and disconnect all USB devices.
  • Connect the USB stick with the IRD file to your Receiver
  • Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, and the installation begins. Only then release the button

Note: If installation does not start , use a different USB stick.

  • After successfully installing the receiver will reboot and the installed image should start-up


Top of Page

8.5 Fortis HS-9510 (Atevio700) (Contents) (Main page)

How do I install an Fortis HS-9510 IRD image?

  • Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . (IRD Download Locations)
  • Extract the zip file
  • Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.

Note: The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.

  • Turn off the Receiver and disconnect all USB devices.
  • Connect the USB stick with the IRD file to your Receiver
  • Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, and the installation begins. Only then release the button

Note: If installation does not start , use a different USB stick.

  • After successfully installing the receiver will reboot and the installed image should start-up


Top of Page

8.6 Fortis FS-9000/9200 (Atevio7000) (Contents) (Main page)

How do I install an Fortis FS-9000/9200 IRD image?

  • Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . (IRD Download Locations)
  • Extract the zip file
  • Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.

Note: The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.

  • Turn off the Receiver and disconnect all USB devices.
  • Connect the USB stick with the IRD file to your Receiver
  • Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, and the installation begins. Only then release the button

Note: If installation does not start , use a different USB stick.

  • After successfully installing the receiver will reboot and the installed image should start-up


Top of Page

Aditional Info

8.012 installation on other Fortis Receivers (Contents) (Main page)

Installation Notes:

If you wish to try or install titan you need to install an Atemio/Atevio factory loader. The original Atemio Bootloader has a security code within so an installation of Titan is not possible with any other fortis loader

If you wish to install Titan the loader version must be 1.54 or above. Titan versions above 1.32 require the new Iboot loader which needs to be installed first if not present.

There are various ways that are explained below:

AAF Recovery Tool (ART) method

  • Install the AAF Recovery Tool (ART) and set up a connection to your receiver
  • Set the IP address and subnet mask of your uboot environment.
  • Reboot the receiver and reconnect to change the settings.
  • Install the factory loader and reboot.
  • The factory loader you installed is version 1.21 that you have to update to 1.54 to be compatible with Titan
  • Visit the [http:((www-atemio.de Atemio] homepage or the ​AAF digital forum and download the latest Atevio/Atemio loaader (1.54).
  • Extract the zip file
    • Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.

Note: The USB stick should not be formatted with windows. Use a separate program, such as the "HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.

  • Turn off the receiver and disconnect all USB devices.
  • Connect the USB stick with the IRD file to your receiver
  • Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, and the installation begins. Only then release the button

Note: Should the installation not start, try a different USB stick.

  • Should you have installed the loader successfully the receiver will reboot and the installed Loader should start-up.

You may now install Titan
Top of Page

Cross Flash Method

This method explains how to install the HDF bootloader flash plugin to your fortis receiver and flash an Atemio/Atevio compatible bootloader from the plugin menu.

  • Download the HDF Bootloader flash plugin from the ​AAF Digital forum.
    • Extract the zip file
    • Now copy the unzipped Plugin folder to a formatted FAT32 USB stick.

Note: The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.

  • go to the plugins section in your receiver and install the plugin and then start it.
  • type in the password contained in the zip file and follow the onscreen prompts.
  • Should you have installed the loader successfully the receiver will reboot and the installed Loader should start-up.

You may now install TitanNit
Top of Page

Reseller Changer Tool Method

This method explains how to change the Reseler ID of an Atemio/Atevio compatible bootloader and flash it to any compatible Fortis receiver from the plugin menu.

  • Visit the ​Atemio homepage or the ​AAF digital forum and download the latest Atevio/Atemio loader.
    • Extract the zip file
    • use the reseller ID changer tool and change the IRD to that of your reseller ID.
    • Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.

Note: The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.

  • Turn off the Receiver and disconnect all USB devices.
  • Connect the USB stick with the IRD file to your Receiver.
  • Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, and the installation begins. Only then release the button

Note: If installation does not start , use a different USB stick.

  • Should you have installed the loader successfully the receiver will reboot and the installed Loader should start-up.

This method requires you to also change the reseller ID to be able to install TitanNit.

Be aware should it the installation fail or a loss of Power occur during the flashing process you could brick your receiver as there is no recovery method. Compatibility with other receivers is not guaranteed but you may find a list of compatible receivers in the Supported Receivers section.
Top of Page

8.111 Uninstalling Titan (Contents) (Main page)

If you have an Atemio/Atevio or UFS receiver all you have to do is install your original ird file as explained above and no bootloader changes are neccessary.

Uninstalling titan and switching back to the original reseller loader can't be done (easily) for other fortis receivers but there is one simple alternative method outlined below.

Uninstalling Titan on non Atemio/Atevio receiver and restore Reseller ID with Maxi-uboot

If you have iboot installed then you must install a version of TitanNit older than 1.32 before using this method.

This will install the factory Atemio loader that is compatible with the AAF Recovery Tool (ART) to be able to install the Maxiuboot Loader.

In order for this method to work make sure the setting Allow "Iboot Update" is enabled in Iboot.

When successfully achieved you may start up ART from your PC and install Maxiuboot.


Once installed you may set up your bootargs and change your Reseller ID back to its factory settings. For flashin original Firmware or other Software please refere to your receivers' manual or instructions.
Top of Page

8.112 Update TitanNit (Contents) (Main Page)

There are two ways to update your TitanNit version and there are merits to both methods :

IRD offline method see Installation / Recovery and select your Reciever model to show information on how to update titan using an IRD titannit image.
Note: using this method plugins and files stored to Flash will be formatted when the update is proformed. Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .

Image Online Method see System update for information on how preform an online update.
Note: using this method all plugins and settings are retained as long as they are not installed in flash.
Top of Page

8.113 IRD Download Locations (Contents) (Main Page)


Top of Page