Changes between Version 11 and Version 12 of nl/Installation-Recovery-Mips-Beyonwiz


Ignore:
Timestamp:
Jan 22, 2019 2:44:08 AM (2 months ago)
Author:
trac
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • nl/Installation-Recovery-Mips-Beyonwiz

    v11 v12  
     1[[TranslatedPages]] 
     2---- 
     3'''8.071 Beyonwiz''' [=#point8.070] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) 
     4---- 
     5 
     6 
     7manufacturer blurb..... 
     8 
     9 
     10---- 
     11'''8.071 Beyonwiz T4''' [=#point8.071] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) 
     12---- 
     13'' How do I install an Beyonwiz T4 Update UBI image? '' 
     14 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) 
     15 * Extract the zip file 
     16 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. 
     17    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). 
     18     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. 
     19 * Turn off the Receiver and disconnect all USB devices. 
     20 * Connect the USB stick with the IRD file to your Receiver 
     21 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...". 
     22   then the installation begins, Only then release the button. 
     23    Note: If installation does not start , use a different USB stick. 
     24 * After successfully installing the receiver will reboot and the installed image should start-up 
     25[[br]] 
     26[#point8 Top of Page] 
     27[[br]]