wiki:nl/Installation-Recovery-Mips-Beyonwiz

Version 12 (modified by trac, 2 months ago) (diff)

--


8.071 Beyonwiz (Contents) (Main page)


manufacturer blurb.....


8.071 Beyonwiz T4 (Contents) (Main page)


How do I install an Beyonwiz T4 Update UBI image?

  • Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . (IRD Download Locations)
  • Extract the zip file
  • Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.

Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).

Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.

  • Turn off the Receiver and disconnect all USB devices.
  • Connect the USB stick with the IRD file to your Receiver
  • Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...". then the installation begins, Only then release the button.

Note: If installation does not start , use a different USB stick.

  • After successfully installing the receiver will reboot and the installed image should start-up


Top of Page