Changes between Version 11 and Version 12 of nl/Installation-Recovery-Mips-Golden-Interstar


Ignore:
Timestamp:
Jan 22, 2019 2:44:08 AM (2 months ago)
Author:
trac
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • nl/Installation-Recovery-Mips-Golden-Interstar

    v11 v12  
     1[[TranslatedPages]] 
     2---- 
     3'''8.080 Goldern interstar Xpeedlx1/2''' [=#point8.080] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl]) 
     4---- 
     5 
     6manufacturer blurb 
     7 
     8 
     9 
     10---- 
     11'''8.081 Goldern interstar Xpeedlx1/2''' [=#point8.081] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl]) 
     12---- 
     13''How do I install a Xpeedlx1/2 update image? '' 
     14 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations]) 
     15 * Extract the zip file  
     16 * Now copy the unzipped firmware folder "xpeedlx3"  to a formatted FAT32 USB stick. 
     17    Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. 
     18 * Turn off the Receiver and disconnect all USB devices.  
     19 * Connect the USB stick with the update image file  
     20 * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button. 
     21 
     22Note: If installation does not start, use a different USB stick.  
     23•After successfully installing the receiver will reboot and the installed image should start-up 
     24[[br]] 
     25[#point8 Top of Page] 
     26[[br]] 
     27---- 
     28'''8.082 goldern interstar Xpeedlx3''' [=#point8.082] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl]) 
     29---- 
     30''How do I install a Xpeedlx3 update image? '' 
     31 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations]) 
     32 * Extract the zip file  
     33 * Now copy the unzipped firmware folder "xpeedlx3" to a formatted FAT32 USB stick. 
     34    Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. 
     35 * Turn off the Receiver and disconnect all USB devices.  
     36 * Connect the USB stick with the update image file  
     37 * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button. 
     38 
     39Note: If installation does not start, use a different USB stick.  
     40•After successfully installing the receiver will reboot and the installed image should start-up 
     41[[br]] 
     42[#point8 Top of Page] 
     43[[br]]