Changes between Version 11 and Version 12 of nl/Installation-Recovery-Mips-Miraclebox


Ignore:
Timestamp:
Jan 22, 2019 2:44:09 AM (2 months ago)
Author:
trac
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • nl/Installation-Recovery-Mips-Miraclebox

    v11 v12  
     1[[TranslatedPages]] 
     2---- 
     3'''8.090 Miraclebox''' [=#point8.090] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) 
     4---- 
     5 
     6manufacturer blurb...... 
     7 
     8 
     9 
     10 
     11 
     12---- 
     13'''8.091 Miraclebox Ultra''' [=#point8.091] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) 
     14---- 
     15'' How do I install an Miraclebox Ultra Update UBI image? '' 
     16 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) 
     17 * Extract the zip file 
     18 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. 
     19    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). 
     20     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. 
     21 * Turn off the Receiver and disconnect all USB devices. 
     22 * Connect the USB stick with the IRD file to your Receiver 
     23 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...". 
     24   then the installation begins, Only then release the button. 
     25    Note: If installation does not start , use a different USB stick. 
     26 * After successfully installing the receiver will reboot and the installed image should start-up 
     27[[br]] 
     28[#point8 Top of Page] 
     29[[br]] 
     30---- 
     31'''8.092 Miraclebox Mini''' [=#point8.092] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) 
     32---- 
     33'' How do I install an Miraclebox Mini Update UBI image? '' 
     34 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) 
     35 * Extract the zip file 
     36 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. 
     37    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). 
     38     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. 
     39 * Turn off the Receiver and disconnect all USB devices. 
     40 * Connect the USB stick with the IRD file to your Receiver 
     41 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...". 
     42   then the installation begins, Only then release the button. 
     43    Note: If installation does not start , use a different USB stick. 
     44 * After successfully installing the receiver will reboot and the installed image should start-up 
     45[[br]] 
     46[#point8 Top of Page] 
     47[[br]]