Changes between Version 11 and Version 12 of nl/Installation-Recovery-Mips-Sezam


Ignore:
Timestamp:
Jan 22, 2019 2:44:08 AM (2 months ago)
Author:
trac
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • nl/Installation-Recovery-Mips-Sezam

    v11 v12  
     1[[TranslatedPages]] 
     2---- 
     3'''8.100 Sezam-Marvel''' [=#point8.100] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Sprachauswahl]) 
     4---- 
     5 
     6manufacturer blurb.... 
     7 
     8 
     9 
     10 
     11 
     12---- 
     13'''8.101 Sezam-Marvel''' [=#point8.101] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Sprachauswahl]) 
     14---- 
     15''How do I install a Sezam-Marvel  update image? '' 
     16 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations]) 
     17 * Extract the zip file  
     18 * Now copy the unzipped firmware folder "enigma2" to a formatted FAT32 USB stick. 
     19    Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. 
     20 * Turn off the Receiver and disconnect all USB devices.  
     21 * Connect the USB stick with the update image file  
     22 * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button. 
     23 
     24Note: If installation does not start, use a different USB stick.  
     25•After successfully installing the receiver will reboot and the installed image should start-up 
     26[[br]] 
     27[#point8 Top of Page] 
     28[[br]] 
     29---- 
     30'''8.102 Sezam-1000HD''' [=#point8.102] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Sprachauswahl]) 
     31---- 
     32''How do I install a Sezam-1000HD  update image? '' 
     33 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations]) 
     34 * Extract the zip file  
     35 * Now copy the unzipped firmware folder "enigma2" to a formatted FAT32 USB stick. 
     36    Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. 
     37 * Turn off the Receiver and disconnect all USB devices.  
     38 * Connect the USB stick with the update image file  
     39 * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button. 
     40 
     41Note: If installation does not start, use a different USB stick.  
     42•After successfully installing the receiver will reboot and the installed image should start-up 
     43[[br]] 
     44[#point8 Top of Page] 
     45[[br]]