wiki:nl/Installation-Recovery-Mips-Sezam

Version 1 (modified by trac, 3 years ago) (diff)

--




8.100 Sezam-Marvel (Contents) (Sprachauswahl)


manufacturer blurb....


8.101 Sezam-Marvel (Contents) (Sprachauswahl)


How do I install a Sezam-Marvel update image?

  • Visit the AAF digital forum and download the latest TitanNit firmware . (IRD Download Locations)
  • Extract the zip file
  • Now copy the unzipped firmware folder "enigma2" to a formatted FAT32 USB stick.

Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.

  • Turn off the Receiver and disconnect all USB devices.
  • Connect the USB stick with the update image file
  • Switch on (mains switch) and and when prompted on the vfd press the Volume up button on the unit, then the installation begins. after the update starts release the volume up button.

Note: If installation does not start, use a different USB stick. •After successfully installing the receiver will reboot and the installed image should start-up
Top of Page


8.102 Sezam-1000HD (Contents) (Sprachauswahl)


How do I install a Sezam-1000HD update image?

  • Visit the AAF digital forum and download the latest TitanNit firmware . (IRD Download Locations)
  • Extract the zip file
  • Now copy the unzipped firmware folder "enigma2" to a formatted FAT32 USB stick.

Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.

  • Turn off the Receiver and disconnect all USB devices.
  • Connect the USB stick with the update image file
  • Switch on (mains switch) and and when prompted on the vfd press the Volume up button on the unit, then the installation begins. after the update starts release the volume up button.

Note: If installation does not start, use a different USB stick. •After successfully installing the receiver will reboot and the installed image should start-up
Top of Page