Changes between Version 11 and Version 12 of nl/Installation-Recovery-SH4-Homecast

Jan 22, 2019 2:44:08 AM (2 months ago)



  • nl/Installation-Recovery-SH4-Homecast

    v11 v12  
     3'''8.020 Homecast''' [=#point8.020] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) 
     6Fortis is a Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized bootloaders to lock them to a specific sales region, TitanNit installation is possible after the installation of a Atevio compatible bootloader. 
     8'''SH4 Homecast Contents''' 
     10 * [#point8.021 8.021 Homecast pro] 
     13'''Additional Info''' 
     15 * [#point8.022 8.022 Uninstallation] 
     16 * [#point8.023 8.025 Update TitanNit] 
     17 * [#point8.024 8.024 IRD Download Location] 
     20'''8.021 Homecast Pro''' [=#point8.021] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) 
     22'' How do I install an Homecast UPDATEUSB Image? '' 
     23 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.2 IRD Download Locations]) 
     24 * Extract the zip file 
     25 * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick. 
     26     Note: The USB stick should not be formatted with windows. Use a separate program, such as the  
     27     " HP USB Disk Storage Format Tool" (freeware program). 
     28     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. 
     29 * Turn off the Receiver and disconnect all USB devices. 
     30 * Connect the USB stick with the IMG file to your Receiver 
     31* Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears, 
     32    then the installation starts. Only then release the button  
     33     Note: If installation does not start, use a different USB stick.  
     34 * The installation is finished when DONE appears on the receiver.  
     35 * Restart the machine after by the main switch again to . 
     37[#point8 Top of Page] 
     41'''8.022 Uninstalling Titan''' [=#point8.022] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) 
     43If you have an Homecast receiver all you have to do is install your original IMG file as explained above and no bootloader changes are necessary. 
     46[#point8 Top of Page] 
     50'''8.023 Update TitanNit''' [=#point8.023] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])   
     52There are two ways to update your TitanNit version and there are merits to both methods : 
     54IRD offline method see [#point8.020 Homecast Contents] and select your Receiver model to show information on how to update titan using an IRD TitanNit image. 
     56''Note: using this method plugins and files stored to Flash will be formatted when the update is preformed. 
     57Plugins and files installed to MNT or a valid configured storage device will retain there settings .'' 
     59Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update. 
     61''Note: using this method all plugins and settings are retained as long as they are not installed in flash.'' 
     63[#point8 Top of Page] 
     67'''8.024 IRD Download Locations''' [=#point8.024] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])   
     70* [ Stable Images] [ Nightly Images][[br]]   
     73[#point8 Top of Page]