wiki:nl/Installation-Recovery-SH4-Katherin

Version 14 (modified by trac, 2 months ago) (diff)

--


8.040 Kathrein (Contents) (Main page)


Fortis is a Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized bootloaders to lock them to a specific sales region, TitanNit installation is possible after the installation of a Atevio compatible bootloader.

SH4 Fortis Contents

Additional Info


8.041 Kathrein Ufs910 (Contents) (Main page)


How do I install a Kathrein UFS910 update image?

  • When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
  • Visit the AAF digital forum and download the latest TitanNit firmware . (IRD Download Locations)
  • Extract the zip file
  • Now copy the unzipped img firmware file - must be renamed to miniFLASH.img - to a formatted FAT32 USB stick.

Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.

  • Turn off the Receiver and disconnect all USB devices.
  • Connect the USB stick with the img file to the front USB Port
  • Switch on (mains switch) and at the same time hold the -Record button- on the Remote Control pressed (about 5 seconds) until "miniFLASH search..." appears, then the installation begins. Only then release the -Record button-

Note: If installation does not start, use a different USB stick.

  • After successfully installing the receiver will reboot and the installed image should start-up


Top of Page


8.042 Kathrein UFS912 (Contents) (Main page)


How do I install a Kathrein UFS912 update image?

  • Visit the AAF digital forum and download the latest TitanNit firmware . (IRD Download Locations)
  • Extract the zip file
  • Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs912/ .

Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.

  • Turn off the Receiver and disconnect all USB devices.
  • Connect the USB stick with the img file
  • Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears, then the installation begins. Only after that message release the -TV/Radio button-

Note: If installation does not start, use a different USB stick.

  • After successfully installing the receiver will reboot and the installed image should start-up


Top of Page


8.043 Kathrein UFS913 (Contents) (Main page)


How do I install a Kathrein UFS913 update image?

  • When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
  • Visit the AAF digital forum and download the latest TitanNit firmware . (IRD Download Locations)
  • Extract the zip file
  • Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ .

Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.

  • Turn off the Receiver and disconnect all USB devices.
  • Connect the USB stick with the img file
  • Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears, then the installation begins. Only after that message release the -TV/Radio button-

Note: If installation does not start, use a different USB stick.

  • After successfully installing the receiver will reboot and the installed image should start-up


Top of Page


8.044 Kathrein UFS922 (Contents) (Main page)


How do I install a Kathrein UFS922 update image?

  • When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
  • Visit the AAF digital forum and download the latest TitanNit firmware . (IRD Download Locations)
  • Extract the zip file
  • Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ .

Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.

  • Turn off the Receiver and disconnect all USB devices.
  • Connect the USB stick with the img file
  • Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears, then the installation begins. Only after that message release the -TV/Radio button-

Note: If installation does not start, use a different USB stick.

  • After successfully installing the receiver will reboot and the installed image should start-up


Top of Page


8.045 Kathrein UFC960 (Contents) (Main page)


How do I install a Kathrein UFS960 update image?

  • When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
  • Visit the AAF digital forum and download the latest TitanNit firmware . (IRD Download Locations)
  • Extract the zip file
  • Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs960/ .

Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.

  • Turn off the Receiver and disconnect all USB devices.
  • Connect the USB stick with the img file
  • Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears, then the installation begins. Only after that message release the -TV/Radio button-

Note: If installation does not start, use a different USB stick.

  • After successfully installing the receiver will reboot and the installed image should start-up


Top of Page


8.046 Uninstalling Titan (Contents) (Main page)


If you have an Katherin UFS receiver all you have to do is install your original IMG file as explained above and no bootloader changes are neccessary.


Top of Page


8.047 Update TitanNit (Contents) (Main Page)


There are two ways to update your TitanNit version and there are merits to both methods :

IRD offline method see Ipbox contents and select your Reciever model to show information on how to update titan using an IRD titannit image.
Note: using this method plugins and files stored to Flash will be formatted when the update is proformed. Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .

Image Online Method see System update for information on how preform an online update.
Note: using this method all plugins and settings are retained as long as they are not installed in flash.
Top of Page


8.048 IRD Download Locations (Contents) (Main Page)


Stable Images Nightly Images

Top of Page