Changes between Version 9 and Version 10 of pl/Installation-Recovery-Mips-Atemio


Ignore:
Timestamp:
Jan 22, 2019 2:44:08 AM (2 months ago)
Author:
trac
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • pl/Installation-Recovery-Mips-Atemio

    v9 v10  
     1[[TranslatedPages]] 
     2---- 
     3'''8.061 Mips Atemio''' [=#point8.061] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) 
     4---- 
     5 
     6manufacturer blurb..... 
     7 
     8 
     9 
     10 
     11 
     12---- 
     13'''8.061 Atemio-Nemesis''' [=#point8.061] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) 
     14---- 
     15'' How do I install an Atemio 5000 Update UBI image? '' 
     16 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) 
     17 * Extract the zip file 
     18 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. 
     19    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). 
     20     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. 
     21 * Turn off the Receiver and disconnect all USB devices. 
     22 * Connect the USB stick with the IRD file to your Receiver 
     23 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...". 
     24   then the installation begins, Only then release the button. 
     25    Note: If installation does not start , use a different USB stick. 
     26 * After successfully installing the receiver will reboot and the installed image should start-up 
     27[[br]] 
     28[#point8 Top of Page] 
     29[[br]] 
     30---- 
     31'''8.062 Atemio5200''' [=#point8.062] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) 
     32---- 
     33'' How do I install an Atemio 5200 Update UBI image? '' 
     34 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) 
     35 * Extract the zip file 
     36 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. 
     37    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). 
     38     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. 
     39 * Turn off the Receiver and disconnect all USB devices. 
     40 * Connect the USB stick with the IRD file to your Receiver 
     41 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...". 
     42   then the installation begins, Only then release the button. 
     43    Note: If installation does not start , use a different USB stick. 
     44 * After successfully installing the receiver will reboot and the installed image should start-up 
     45[[br]] 
     46[#point8 Top of Page] 
     47[[br]] 
     48---- 
     49'''8.063 Atemio6000''' [=#point8.063] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) 
     50---- 
     51'' How do I install an Atemio 6000 Update UBI image? '' 
     52 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) 
     53 * Extract the zip file 
     54 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. 
     55    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). 
     56     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. 
     57 * Turn off the Receiver and disconnect all USB devices. 
     58 * Connect the USB stick with the IRD file to your Receiver 
     59 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...". 
     60   then the installation begins, Only then release the button. 
     61    Note: If installation does not start , use a different USB stick. 
     62 * After successfully installing the receiver will reboot and the installed image should start-up 
     63[[br]] 
     64[#point8 Top of Page] 
     65[[br]] 
     66---- 
     67'''8.064 Atemio6100''' [=#point8.064] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) 
     68---- 
     69'' How do I install an Atemio 6100 Update UBI image? '' 
     70 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) 
     71 * Extract the zip file 
     72 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. 
     73    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). 
     74     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. 
     75 * Turn off the Receiver and disconnect all USB devices. 
     76 * Connect the USB stick with the IRD file to your Receiver 
     77 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...". 
     78   then the installation begins, Only then release the button. 
     79    Note: If installation does not start , use a different USB stick. 
     80 * After successfully installing the receiver will reboot and the installed image should start-up 
     81[[br]] 
     82[#point8 Top of Page] 
     83[[br]] 
     84---- 
     85'''8.065 Atemio6200''' [=#point8.065] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) 
     86---- 
     87'' How do I install an Atemio 6200 Update UBI image? '' 
     88 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) 
     89 * Extract the zip file 
     90 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. 
     91    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). 
     92     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. 
     93 * Turn off the Receiver and disconnect all USB devices. 
     94 * Connect the USB stick with the IRD file to your Receiver 
     95 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...". 
     96   then the installation begins, Only then release the button. 
     97    Note: If installation does not start , use a different USB stick. 
     98 * After successfully installing the receiver will reboot and the installed image should start-up 
     99[[br]] 
     100[#point8 Top of Page] 
     101[[br]]