Changes between Version 11 and Version 12 of pl/Installation-Recovery-SH4-Katherin


Ignore:
Timestamp:
Jan 22, 2019 2:44:07 AM (2 months ago)
Author:
trac
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • pl/Installation-Recovery-SH4-Katherin

    v11 v12  
     1[[TranslatedPages]] 
     2---- 
     3'''8.040 Kathrein''' [=#point8.040] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) 
     4---- 
     5 
     6Fortis is a Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized bootloaders to lock them to a specific sales region, TitanNit installation is possible after the installation of a Atevio compatible bootloader. 
     7 
     8'''SH4 Fortis Contents''' 
     9 
     10 * [#point8.041 8.041 Kathrein Ufs910] 
     11 * [#point8.042 8.042 Kathrein Ufs912] 
     12 * [#point8.043 8.043 Kathrein Ufs913] 
     13 * [#point8.044 8.044 Kathrein Ufs922] 
     14 * [#point8.045 8.045 Kathrein Ufs960] 
     15 
     16'''Additional Info''' 
     17 
     18 * [#point8.046 8.06 Uninstallation] 
     19 * [#point8.047 8.07 Update TitanNit] 
     20 * [#point8.048 8.08 IRD Download Location] 
     21 
     22---- 
     23'''8.041 Kathrein Ufs910''' [=#point8.041] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) 
     24---- 
     25'' How do I install a Kathrein UFS910 update image? '' 
     26 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched. 
     27 * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations]) 
     28 * Extract the zip file 
     29 * Now copy the unzipped img firmware file - must be renamed to miniFLASH.img - to a formatted FAT32 USB stick. 
     30     Note: The USB stick should not be formatted with windows, but a separate program, such as the  
     31     " HP USB Disk Storage Format Tool" (freeware program). 
     32     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. 
     33 * Turn off the Receiver and disconnect all USB devices. 
     34 * Connect the USB stick with the img file to the front USB Port 
     35 * Switch on (mains switch) and at the same time hold the -Record button- on the Remote Control pressed (about 5 seconds)  
     36   until "miniFLASH search..." appears, then the installation begins. Only then release the -Record button- 
     37     Note: If installation does not start, use a different USB stick. 
     38 * After successfully installing the receiver will reboot and the installed image should start-up 
     39[[br]] 
     40[#point8 Top of Page] 
     41[[br]] 
     42---- 
     43'''8.042 Kathrein UFS912''' [=#point8.042] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) 
     44---- 
     45'' How do I install a Kathrein UFS912 update image? '' 
     46 * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations]) 
     47 * Extract the zip file 
     48 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs912/ . 
     49     Note: The USB stick should not be formatted with windows, but a separate program, such as the  
     50     " HP USB Disk Storage Format Tool" (freeware program). 
     51     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. 
     52 * Turn off the Receiver and disconnect all USB devices. 
     53 * Connect the USB stick with the img file 
     54 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears, 
     55   then the installation begins. Only after that message release the -TV/Radio button- 
     56     Note: If installation does not start, use a different USB stick. 
     57 * After successfully installing the receiver will reboot and the installed image should start-up 
     58[[br]] 
     59[#point8.1 Top of Page] 
     60[[br]] 
     61---- 
     62'''8.043 Kathrein UFS913''' [=#point8.043] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) 
     63---- 
     64'' How do I install a Kathrein UFS913 update image? '' 
     65 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched. 
     66 * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations]) 
     67 * Extract the zip file 
     68 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ . 
     69     Note: The USB stick should not be formatted with windows, but a separate program, such as the  
     70     " HP USB Disk Storage Format Tool" (freeware program). 
     71     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. 
     72 * Turn off the Receiver and disconnect all USB devices. 
     73 * Connect the USB stick with the img file 
     74 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears, 
     75   then the installation begins. Only after that message release the -TV/Radio button- 
     76     Note: If installation does not start, use a different USB stick. 
     77 * After successfully installing the receiver will reboot and the installed image should start-up 
     78[[br]] 
     79[#point8.1 Top of Page] 
     80[[br]] 
     81---- 
     82'''8.044 Kathrein UFS922''' [=#point8.044] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) 
     83---- 
     84'' How do I install a Kathrein UFS922 update image? '' 
     85 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched. 
     86 * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations]) 
     87 * Extract the zip file 
     88 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ . 
     89     Note: The USB stick should not be formatted with windows, but a separate program, such as the  
     90     " HP USB Disk Storage Format Tool" (freeware program). 
     91     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. 
     92 * Turn off the Receiver and disconnect all USB devices. 
     93 * Connect the USB stick with the img file 
     94 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears, 
     95   then the installation begins. Only after that message release the -TV/Radio button- 
     96     Note: If installation does not start, use a different USB stick. 
     97 * After successfully installing the receiver will reboot and the installed image should start-up 
     98[[br]] 
     99[#point8 Top of Page] 
     100[[br]] 
     101---- 
     102'''8.045 Kathrein UFC960''' [=#point8.045] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) 
     103---- 
     104'' How do I install a Kathrein UFS960 update image? '' 
     105 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched. 
     106 * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations]) 
     107 * Extract the zip file 
     108 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs960/ . 
     109     Note: The USB stick should not be formatted with windows, but a separate program, such as the  
     110     " HP USB Disk Storage Format Tool" (freeware program). 
     111     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. 
     112 * Turn off the Receiver and disconnect all USB devices. 
     113 * Connect the USB stick with the img file 
     114 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears, 
     115   then the installation begins. Only after that message release the -TV/Radio button- 
     116     Note: If installation does not start, use a different USB stick. 
     117 * After successfully installing the receiver will reboot and the installed image should start-up 
     118[[br]] 
     119[#point8 Top of Page] 
     120[[br]] 
     121 
     122----  
     123'''8.046 Uninstalling Titan''' [=#point8.046] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) 
     124---- 
     125If you have an Katherin UFS receiver all you have to do is install your original IMG file as explained above and no bootloader changes are neccessary. 
     126 
     127[[br]] 
     128[#point8 Top of Page] 
     129[[br]] 
     130 
     131----    
     132'''8.047 Update TitanNit''' [=#point8.047] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])   
     133---- 
     134There are two ways to update your TitanNit version and there are merits to both methods : 
     135 
     136IRD offline method see [#point8 Ipbox contents] and select your Reciever model to show information on how to update titan using an IRD titannit image. 
     137[[br]] 
     138''Note: using this method plugins and files stored to Flash will be formatted when the update is proformed. 
     139Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .'' 
     140 
     141Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update. 
     142[[br]] 
     143''Note: using this method all plugins and settings are retained as long as they are not installed in flash.'' 
     144[[br]] 
     145[#point8 Top of Page] 
     146[[br]]  
     147 
     148----    
     149'''8.048 IRD Download Locations''' [=#point8.048] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])   
     150----  
     151[http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]]   
     152   
     153[[br]]   
     154[#point8 Top of Page]   
     155[[br]]