wiki:pl/Installation-Recovery-SH4-Spark

Version 12 (modified by trac, 2 months ago) (diff)

--


8.051 SPARK (Contents) (Main page)


Spark is a reseller of the Fulan Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized hardware.

SH4 Spark Contents

Additional Info


8.051 SPARK (7111) (Contents) (Main page)


How do I install a Spark (7111) Update Image?

  • Visit the AAF digital forum and download the latest TitanNit firmware . (IRD Download Locations)
  • Extract the zip file
  • Copy the unzipped firmware update file to a formatted to FAT32 USB stick and copy the file e2jffs2.img and uImage into a folder called "enigma2"

Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.

  • Turn off the device.
  • Connect the USB stick with the update file
  • hold the "OK" button and switch on the(mains plug) and hold it down (about 5 seconds) until "Forc" appears, then the installation will begin, when you see "U LD" in the display release the "OK" button.

Note: If the installation does not start, use a different USB stick.

  • After installation "SUCC" appears in the display boot the receiver and the new image should appear.


Top of Page


8.052 SPARK7162 (Contents) (Main page)


How do I install a Spark (7162) Update Image?

  • Visit the AAF digital forum and download the latest TitanNit firmware . (IRD Download Locations)
  • Extract the zip file
  • Copy the unzipped firmware update file to a formatted to FAT32 USB stick and copy the file e2jffs2.img and uImage into a folder called "enigma2"

Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.

  • Turn off the device.
  • Connect the USB stick with the update file
  • hold the "OK" button and switch on the(mains plug) and hold it down (about 5 seconds) until "Forc" appears, then the installation will begin, when you see "U LD" in the display release the "OK" button.

Note: If the installation does not start, use a different USB stick.

  • After installation "SUCC" appears in the display boot the receiver and the new image should appear.


Top of Page


8.053 Uninstalling Titan (Contents) (Main page)


If you have an Atemio/Atevio or UFS receiver all you have to do is install your original ird file as explained above and no bootloader changes are neccessary.


Top of Page


8.054 Update TitanNit (Contents) (Main Page)


There are two ways to update your TitanNit version and there are merits to both methods :

IRD offline method see Installation / Recovery and select your Receiver model to show information on how to update titan using an IRD TitanNit image.
Note: using this method plugins and files stored to Flash will be formatted when the update is preformed. Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .

Image Online Method see System update for information on how preform an online update.
Note: using this method all plugins and settings are retained as long as they are not installed in flash.
Top of Page


8.055 IRD Download Locations (Contents) (Main Page)


Stable Images Nightly Images

Top of Page