wiki:ru/Installation-Recovery-SH4-IPBox

Version 6 (modified by trac, 11 days ago) (diff)

--

Другие языки:


8.031 Ipbox (Contents) (Main page)


Ipbox is a Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized bootloaders to lock them to a specific sales region.

SH4 Ipbox Contents

Additional Info


8.031 Ipbox91 (Contents) (Main page)


How do I install an Ipbox 91 UPDATEUSB Image?

  • Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . (IRD Download Locations)
  • Extract the zip file
  • Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.

Note: The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.

  • Turn off the Receiver and disconnect all USB devices.
  • Connect the USB stick with the IMG file to your Receiver
  • Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,

then the installation starts. Only then release the button

Note: If installation does not start, use a different USB stick.

  • The installation is finished when DONE appears on the receiver.
  • Restart the machine after by the main switch again to .


Top of Page


8.032 Ipbox900 (Contents) (Main page)


How do I install an Ipbox 900 UPDATEUSB Image?

  • Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . (IRD Download Locations)
  • Extract the zip file
  • Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.

Note: The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.

  • Turn off the Receiver and disconnect all USB devices.
  • Connect the USB stick with the IMG file to your Receiver
  • Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,

then the installation starts. Only then release the button

Note: If installation does not start, use a different USB stick.

  • The installation is finished when DONE appears on the receiver.
  • Restart the machine after by the main switch again to .


Top of Page


8.033 Ipbox910 (Contents) (Main page)


How do I install an Ipbox 910 UPDATEUSB Image?

  • Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . (IRD Download Locations)
  • Extract the zip file
  • Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.

Note: The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.

  • Turn off the Receiver and disconnect all USB devices.
  • Connect the USB stick with the IMG file to your Receiver
  • Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,

then the installation starts. Only then release the button

Note: If installation does not start, use a different USB stick.

  • The installation is finished when DONE appears on the receiver.
  • Restart the machine after by the main switch again to .


Top of Page


8.034 Ipbox9000 (Contents) (Main page)


How do I install an Ipbox 9000 UPDATEUSB Image?

  • Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . (IRD Download Locations)
  • Extract the zip file
  • Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.

Note: The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.

  • Turn off the Receiver and disconnect all USB devices.
  • Connect the USB stick with the IMG file to your Receiver
  • Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,

then the installation starts. Only then release the button

Note: If installation does not start, use a different USB stick.

  • The installation is finished when DONE appears on the receiver.
  • Restart the machine after by the main switch again to .


Top of Page


8.035 Uninstalling Titan (Contents) (Main page)


If you have an Ipbox receiver all you have to do is install your original IMG file as explained above and no bootloader changes are neccessary.


Top of Page


8.036 Update TitanNit (Contents) (Main Page)


There are two ways to update your TitanNit version and there are merits to both methods :

IRD offline method see Installation / Recovery and select your Reciever model to show information on how to update titan using an IRD titannit image.
Note: using this method plugins and files stored to Flash will be formatted when the update is proformed. Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .

Image Online Method see System update for information on how preform an online update.
Note: using this method all plugins and settings are retained as long as they are not installed in flash.
Top of Page


8.037 IRD Download Locations (Contents) (Main Page)



Top of Page